REPAIR TO ROOF SHEET, RIDGES, VALLEY GUTTER AND CERTAIN MISC WORKS AT RESTRICTED AREA UNDER AGE B/R-II AT PMS

Amount

Demolition and breaking up 100mm dia slat glazed or AC or reinforced concrete drain pipes, jointed in cement mortar complete all as specified and directed.

Demolition and breaking up 150mm dia slat glazed or AC or reinforced concrete drain pipes, jointed in cement mortar complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single sockected in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 150mm PVC (SWR) pipes single sockected in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends any radius of bore 110mm with access door complete all as specified and directed.

S&F PVC(SWR) junction duble (Double T) equal or unequal of bore 110mm bore incl provided with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of bore 150mm complete all as specified and directed.

S&F PVC (SWR) plain T of bore 150mm complete all as specified and directed.

Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in Cement Mortar 1:4 finishing fair and even with approved water proofing compound as per manufacturing instraction complete all as specified and as directed. (Note:- WPC will be measured and paid separately)

Supply only intergral water proofing compound (liquid admixture) complete all as specified and directed.

M&L for 15mm thick in cement plaster CM 1:6 on brick or concrete surfaces finished fair and even on wall complete all as specified and directed.

M&L for 5mm thick in cement plaster 1:3 on concrete surfaces finished fair and even on ceilings complete all as specified and directed.

M&L for three coats of white wash as on ceilings on newly plastered surfaces including preperation complete all as specified and directed.

Material & Labour for preparation of new surfaces of plastered walls and applying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. over and including a coat of primer over plastered surfaces of walls to prepare the surface even and smooth complete all as specified.

M&L Preparation of newly plastered surfaces of wall and aapplying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. on external surface as directed by Engineer-in-charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated of any profile steel sheet corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified up to anyheight including all necessary scaffolding and safety measures complete all as specified and directed

M&L for 1.00 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 .00mm thick Galvanised, plain mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. and welded or soldered joints are provided complete all as specified and directed.

M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified any height Mtr height including all necessary scaffolding and safety measures complete all as specified and directed

M&L Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc and with L-type or J-type or cranked hook bolts in lieu of screw complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Demolition of brickwork or stone boulder masonry built in cement or cement lime mortar complete all as specified and directed.

M&L for brick work with fly ash bricks old size straight or curved on plan exc 6m mean radius in cement mortar 1:6 complete all as specified and directed.

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level) complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm stone aggregate as in sub base complete all as specified and directed.

M&L for Plain cement concrete C-1 type 1:3:6 (20mm graded aggregate) 75mm thick as in plinth protection/path complete all as specified and directed.

M&L for Plain cement concrete C-1 type 1:3:6 (20mm graded aggregate) as in surface channels and drains complete all as specified and directed.

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B1 using 20mm stone aggregate using with nominal reinforcement as in flooring finshed even and smooth with using extra cement complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped end complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L 75 mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in receiving floor Finishes complete all as specified and directed.

M&L for joint free non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.18 Sqm but not exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles laid over screed bed or bedding layer of 15mm thick in CM 1:6 including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300X450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement ot match, with backing coat 10mm thick in CM 1:3.including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete all as specified and directed.

Anodised aluminium snap grid of size 605mmX605mm frame work for false ceiling all as specified including Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified

M&L for 4 mm thick Designer Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi?nium framework with screws fixedn ceiling complete all as specified and directed.

Demolition of cement concrete (Reinforced) in any description not other wise specifically provided for including cutting the reinforcement etc complete all as specified and directed.

M&L for RCC 1:1.5:3 type A1 (20 mm graded stone aggregate) nominal mix as in beam, chajja, fin, facia parapet, platform etc complete all as specified and directed.

Form work to soffits of Chajja, facia, parapet, plat form etc etc for rough finished surface of concrete complete all as specified and directed.

M&L for grading roof in cement mortar 1:3, 25mm thick in edge and 50mm thick in ridge including necessary curing complete all as specified in SSR Part I clause No 11.42.2

M&L one coat of aluminium paint over APP membrane complete all as specified and directed.

M & L for providing water proofing treatment with a layer of APP based polymeric membrane, 3 mm thick (minimum), weighing not less than 3.60 kg/Sqm reinforced with polymer non woven fabric (weighing not less than 160 gm/ Sqm) shall be applied over one coat of cold bituminious primer @ 0.40 ltr/ Sqm ( membrane shall be laid using butane torch and sealing all joints etc, complete all as specified and directed .( Note: The overlaps shall be of minimum 75 mm on longitudinal direction and 100 mm on transverse direction) complete all as specified and directed.

HAZRA ENTERPRISE (BID ID -3367101)

MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP (BID ID -3367083)