REPAIRS TO DRAIN, CULVERT, PATHS, SECURITY WALL, FENCING, BARBED WIRE AND CONCERTINA COIL, GLASS COPING ETC TO DMRL, ATC DEVATALAGUTTA AND ADJOINING AREA UNDER AGE B/R-II HYDERABAD

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., as directed by the Engineer in Charge.

M&L for walling of squre rubble regular coursed, well bonded, bedded and solidly hearted built in CM 1:4

M&L for walling of square rubble regular coursed, well bonded, bedded and solidly hearted built in CM 1:6

All as per item No. 3 above, but except stones

M & L for Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) including raising height of existing manholes complete all as specified and as directed.

M & L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius using old size brick built in CM 1:6 including raising height of man holes from ground level

M&L Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work.

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work or on one side of lathing in CM 1:6 finished even and smooth without using extra cement including taking down existing plaster complete all as specified

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work in CM 1:4 finished even and smooth without using extra cement including taking down existing plaster complete all as directed.

M & L for Raised pointing to random rubble masonry coursed or brought up to courses in cement mortar 1:3.

Raking out joints to square rubble masonry, coursed or uncoursed and M & L for Raised pointing in CM 1:3.

M&L broken glass coping 25mm thick in CM 1:3 on top of wall including demolition of old coping complete all as specified and as directed.

M & L for boulder pitching, laid dry, hand packed tightly and grouted with cement sand mortar 1:6

M & L for Flush pointing to random rubble masonry uncoursed or brought up to courses in cement mortar 1:3.

Preparing new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls.

Preparing surfaces plastered or unplastered old surfaces of walls and applying one coats of cement base paint complete all as specified.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape hand rail straight portion , drilled and contersunk for balusters , nosing to steps, struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets ( for securing chain link fencing ) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 including dismantling old steel work complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete including dismantling of steel work complete all as specified

S&F in repairs mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars, ladders, framed balusters , walk ways, railing, framework or water tank and similar work conforming to Fe- 290 Gde E-165 all as specified

S & F Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc., including taking down the existing wire complete as directed.

S&F in repairs Razor edge concertina coil, 750mm dia, consisting of spirals with sharp edged tape of 0.5mm thick, crimped to 2.6mm dia high tensile steel wire duly galvanized as per IS 4454 with scrapper barb having 51 spirals with 125 chips (when stretched to a length of 6 metre, weight of each coil shall be 8 to 9 Kg approximately) and fixed to MS frame work 'Y' shaped and placed at 1.5m apart and tied with GI staples/clips to retain horizontal including provision of necessary bolts, nuts etc. complete all as specified and directed. Make : Bengal sheet metal works, Kolkota/Armstrong wire.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer.

Preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint (ordinary tint) complete

Demolition of cement concrete (unreinforced ) in ground floors and pavings n. exc 15 cm thickness ( below or above ground level)

M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in foundation, sub base for complete all as specified.

M&L 75mm thick cement concrete type B-2, 1:2:4 ( 40mm graded stone aggregate as in paths parking etc finished even and smooth without using extra cement complete

M&L 100mm thick cement concrete type B-2, 1:2:4 ( 40mm graded stone aggregate as in roads, hardstanding etc finished even and smooth without using extra cement complete

M&L Forming 12mm thick expansion joints for 100mm thick PCC filled with pre- formed bituminus filler and top 30mm primed and sealed with sealing compound Grade 'A' complete

M&L in repair ready made speed breakers colour in yellow, black reflectors PMMA amber colour HIP reflected ( yellow , white) moulded in ABC alloy of size 350mm x 50mm x 4mm thickness, complete all as specfied and directed. Make : 3M / AVERY / DARK EYE / SIGNTECH

M&L for providing chequered cement concrete rubber moulded coloured tiles glossy factory made of hydraulic pressed finish of 25 mm thick and size not less than 300x300mm thick set and jointed in neat cement slurry in floors with grey cement and pigments and with 15mm thick screed bed or bedding layer in CM 1:6 including dismantling of old tiles and screed bed complete all as directed

M&L in repairs 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade ISI Mark with approved colour, design & pattern as in footpath, parks, lawn, drive ways or light traffic parking etc of required strength, thickness & size / shape , made by table vibratory method using PU mould , laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern finishing sweeping extra sand complete all as specified

M&L in repairs 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade ISI Mark with approved colour, design & pattern as in footpath, parks, lawn, drvie ways or light traffic parking etc of required strength, thickness & size / shape , made by table vibratory method using PU mould , laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern finishing sweeping extra sand complete all as specified

M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement , 3 coarse samd) including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5mm) includng making drainage opening wherever required including demolition of existing kerb stone complete all as specified

Renewing cement concrete chequered tiles / inter locking tiles ISI Mark in patch, area n. exc 5 Sqm including removing and cleaning old tiles, preparing bed and laying or setting, jointing and pointing new or old tiles, including replaced damage tiles & providing PCC (1:4:8) 75mm thick sub base and 20mm thick CM 1:6 bedding layer complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil.

M&L for dismantling of Chain link fencing of any thickness complete all as directed

S&F GI chain link fencing of any type n exc 3.0 kg per Sqm including line wires, any mesh, size and type of standards, rails, straining bolts, etc., including provision of binding wire.

S&F mild steel round bars 10mm dia and over cut to length . bent to shape required for chain link fencing support complete all as specified

M&L for welding of existing damage / broken hinges, handle, frame and any other parts of gate, rolling shutters, fencing and adding angle to posts etc to achieve smooth function complete all as specified

Excavating in trenches n. exc 1.5m wide and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soils.

Removing Excavated soils exceeding 1.5 KM but not exceeding 5 KM and depositing where directed.

M & L plain Cement Concrete1:4:8 type D-2 (40mm graded aggregate) in foundation filling and mass concrete

M&L precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, bed plates, pintle blocks, anchorage blocks, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4

Mild steel TMT bars 10 mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

M&L Plain cement concrete, type B2 1:2:4 (using 40mm graded stone aggregate) as in surface channel and bed of drains including demolition of old concrete complete all as specified.

Extra for forming fair finish drain or channel 30cm inner girth in cement concrete using extra cement incl forms, moulds mitred/stopped ends etc complete all as directed.

Cleaning of drains by excavating of the filled earth. Vegetation and all foreign material average width 45 cm & avg depth 60cm and removing the excavated material to a distance exc. 50m and not exc. 250m complete all as directed.

S&F in repairs Fully retro reflective, Bldg sign board with frame of 50mm dia Stainless steel pipe size 1000 mm x 500 mm, made out of 13SWG CRCA sheet with writing bldg name in HINDI/ ENGLISH letters of required size and the sign board shall be fixed to 50mm dia stainless steel pole of height of 1200mm from ground level including excavation of post holes of size 400mm x 400mm x 300mm and getting out in any type of soil and filled with and including provision of PCC 1:2:4 type B1 (using 20mm graded stone aggregate) and removing including making good the disturbed surfaces to match with existing, complete all as specfied and directed.

Taking out carefully old disturbed / loose complete sign board of any size and height and refixing the same in position with PCC (1:2:4) including repairing and applying one coat of synthetic enamel paint complete all as specified

M&L preparation of old surfaces of bricks, stone, concrete of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint complete

M&L preparation of new or previously untreated surfaces of brick, stone, concrete asbestos or plaster surfaces of any description over 10cm girth or width, not otherwise described and applying two coat of synthetic enamel paint over a coat of priming paint ( plaster coat) complete all as specified and directed.

Supply and fix in repair solar delineator made of MS Pipe 40 mm (one point five inches) dia and 1.2 m long with solar lamp 3" dia (three inches) with visibility upto 500 metre, made out of poly carbonate aluminium material, complete all as specified and directed. Make : 3M / AVERY / DARK EYE / SIGNTECH

S&F 2mm thick fibre glass reinforced translucent plain sheeting with two corrugations / 10 cm side lap fixed with shelf tapping screws and washer in roof, wall etc complete all as directed

M&L providing precast cement concrete type B0, 1:2:4 ( 12.5mm graded aggregate) louvres and jallies, 30mm thick set in cement mortar 1:4 ( measured solid) includig all moulding etc complete all as directed.

M&L for preparation of old descorated plastered / unplastered surfaces of walls, soffits of chajja, cornices etc and applying one coat of cement base paint upto three storey building including scaffloding arrangement all as specified.

Taking down carefully existing iron door / gate area exc 3 Sqm from opening and repair damage parts, welding where required, greasing/ oiling , change the position of hinges along with hold fast and refixing in original position after all repairs complete

Taking down carefully existing chain link fencing from post, refixing the post with PCC 1:2:4, 60x60x60cm in base and refixing the same in existing position incluidng replace damage nut and bolts complete all as specified

M & L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting grooves and nosing including 15mm thick screed bed/plaster in CM 1:4 complete all as specified and directed.

M&L for 18 to 20mm thick polished granite work ( of any type) machine cut, in risers, skirting /dado fixed over 10mm thick rendering in CM 1:4 as backing coat and jointecd with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone,complete all as specified.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar complete all as specified.

Anjana corporation

SRI SAI ENTERPRISES

sanjar enterprises

Venkat Sai Enterprises

sri vishnu enterprises

ELEVATORS MAINTENANCE ENGINEER WORKS

M/s ANUSHA ENTERPRISES