PROVN OF FLY PROOFING DOORS AND WINDOWS, KITCHEN SINK, WATER TANK CONNECTION IN KITCHEN ETC IN BLDG NO P-278 TO P-286 AND P-307 (JCOS/ ORS MD ACCN) AT RAINA PARK OF 176 MED REGT AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT

Amount

Taking down cement plaster of any description including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

Material and labour 12mm thick cement plaster in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified

Material and labour 5mm thick rendering in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty complete all as specified and directed

Material and labour for complete removal of existing treatment by washing, rubbing down and stopping etc on wall surfaces and applying two coat of oil emulsion distemper over a coat of 1mm thick wall care putty complete all as specified.

Material and labour preparation of new plastered surface of wall and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of old surfaces of wall including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un plastered surfaces and applying one coat of white wash complete all as specified.

Material and labour preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of old surfaces of ceiling including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un plastered surfaces and applying one coat of white wash complete all as specified.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thick (below or above ground level) complete all as specified and directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Material and labour for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub floors, sub base; concrete surfaces finished fair & even to receive topping floor finish/ layer complete all as specified and directed.

Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

Material and labour for 18 to 20mm thick machine cut Kota stone in flooring/stair case step and riser in single pieces laid over and including 15mm thick screed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the colour of stone slab including rubbing and polishing complete all as specified and directed.

Material and labour for 18 to 20mm thick machine cut Kota stone as in vertical surfaces, risers of steps, skirting, dado and pillars etc laid over and including 10mm thick rendering in cement mortar (1:4) jointed with grey cement slurry mixed with pigment to match the colour of stone slab including rubbing and polishing complete all as specified and directed.

Material and labour for 16 to 18mm thick pre-polished green marble as in cooking platform laid over 15mm thick screed in cement mortar (1:6) including grinding and mirror polished/ granite polished and making of hole for LPG pipe and rounding of edge of stone complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles of size 300 x 450 x 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) and finishing the surface fair and even to receive tiles complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 6 to 7mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but n. exc. 0.18 Sqm as in vertical surfaces such as skirting/ dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15mm thick in cement mortar (1:4) for laying floor finishes complete all as specified and directed.

Demolition of brick work as in walls/ parapet walls removing grass fungus weed, roots of trees completely, grown on roof/ wall surfaces complete all as specified and directed.

Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.

All as per Ser item No 22.00 above but except bricks

Material and labour lean concrete (1:7:12) type F-2 using 40mm graded stone aggregate as in filling in sunken floor complete all as specified and directed

Material and labour 15mm thick rendering in cement plaster on brick or concrete surfaces in cement mortar (1:3) with integral water proofing compound @ 3% by weight of cement finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only integral water proofing compound all as specified and directed.

Material and labour for APP based polymeric membrane minimum weighing 3.60kg/ sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified and directed complete all as specified and directed. Make: Shalimar Tar Products/ IWL Ltd/ Torchar.

Supply and fixing vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor fixed in repairs complete all as specified.

Supply and fixing PVC connection 15mm bore size with PTMT nuts of length 450mm fixed in repair complete all as specified and directed.

Supply and fixing in repair flushing cistern duo flush of 10 liter capacity white colour complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n. exc. 2 sqm each complete all as specified and directed.

M&L for mild steel framed work as in doors chowkhats or frames, cooler stand or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frames, chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed

Material and labour 35mm thick 2nd class hard wood factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing steel window/ ventilator with glazed shutter as well as gauged shutter with side hung/ top hung shutters including box type/ projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars, hold fast, tower bolt and handles etc and necessary cooler arrangement in window and fixed with PCC (1:2:4), including taking down old unserviceable window/ ventilator, complete as per Drg No. CEJZ/TD-1020/08 sheet No. 1/3 to 3/3 all as specified and directed. Note : The quoted rate for glazed and gauged shutter window/ ventilator and measured one time clear opeing for payment of window/ ventilator.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

Material and labour for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

Supply and fixing Prayag Syment butt hinges 100mm long all as specified and directed.

Supply and fixing Prayag Syment tower bolt 150mm long all as specified and directed.

Supply and fixing Prayag Syment bow handle 125mm long all as specified and directed.

Material and labour for mild steel sliding door bolts 300mm long plate type stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Supply and fixing 125mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.

Supply and fixing MS pressed handles, oval type, stove enameled black 150mm size complete all as specified and directed.

Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 150mm complete all as specified.

Material and labour in repair 20mm dia powder coated mild steel curtain rod, fixed with & including MS powder coated hooks/ brackets and decorative finials (at both side), shade as approved by GE complete all as specified including fixing of long size rawl plugs in wall for MS hook fixed complete all as specified and directed.

Material and labour for preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing complete all as specified and directed.

Material and labour for 15mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Material and labour for 20mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Material and labour re-fixing old tubing 15mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Material and labour re-fixing old tubing 20mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Supply and fixing in repair Bib Cock long nose (Foam Flow) with Flange, suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed

Supply and fixing in repair pillar cock (Foam Flow) with Flange, suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed

Supply and fixing in repair single lever sink mixer swinging spout (wall mounted) with connecting legs & wall flanges of Make : Prayag Cat No. 9855 or equivalent makes of Group I of Appx “B” (as approved) suitable for fixing to 15mm bore GI pipe, complete all as specified and directed

Supply and fixing in repair Concealed Stop Cock with Adjustable Wall Flange, suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed

Supply and fixing in repair angular stop Cock with Wall Flange, suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed

Supply and fixing angular stop cock with wall flange suitable for fixing to 15mm bore GI pipe complete all as specified and directed

Supply and fixing vitreous china wash hand basin, white, flat back 550 x 400mm including one number brass CP waste coupling, 32mm dia, PVC waste pipe with connector, brackets 2 numbers including cutting for and pinning in ends of brackets fixed in repairs complete all as specified and directed.

Supply and fixing flexible PVC waste pipe of approved quality 25mm bore, 75cm long with one end socketed fixed to waste coupling including one PVC reducer 25mm complete all as specified and directed

Supply and fixing in repairs mild steel CP grating 125mm dia with centre hole all as specified and directed by the Engr-in-Charge.

Supply and fixing droplets looking mirror (900 x 600 x 6mm) and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed

Supply and fixing in repairs soap dish holder and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed

Supply and fixing of peg set of 5 of PTMT fixed to rear side of door shutter in bath complete all as specified and directed.

Supply and fixing in repairs 125mm chromium plated brass shower rose with swivel joints including fixing to steel pipe of union complete all as specified and directed.

Material and labour for 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement fixed complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc., including cleaning or refixing or removal to store complete all as specified.

Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 75mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) junction single (Single T) 110mm bore, equal or unequal complete all as specified

Supply and fixing PVC (SWR) junction single (Single T) 75mm bore, equal or unequal complete all as specified

Supply and fixing PVC (SWR) vent cowl 75mm bore all as specified and directed.

Supply and fixing brass chromium plated tubular towel rail 20mm dia, ‘D’ type, 600mm long between flanges fixed in repairs complete all as specified and directed.

Supply and fixing stainless steel kitchen rack of size 31" x 36" x 10" and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed

Supply and fixing in repairs stainless steel sink single bowl 1.0mm thick overall size 610 x 510 x 203mm and bowl size 560 x 410 x 203mm for kitchen or laboratory with plugs, washers waste coupling 32mm bore of brass chromium plated etc of Make : Pragay Cat No. P-348 or equivalent makes of Group I of Appx “B” complete all as specified and directed

Material and labour cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10cm girth in brick walls complete all as specified and directed.

Material and labour reinforced cement concrete (1:2:4) type B-0 using 12.5mm crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork complete all as specified and directed.

Material and labour for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200mm thick (Horizontal or sloping) for flat & rough finished surfaces of concrete complete all as specified and directed.

Supply and fixing rolled section as in main and cross beams, hip and jack rafter, purlins, connected to common rafters, fixed with cleats and plates etc conforming to Fe-410-W (Gde-E-250), Quality 'A' including one shop coat of zinc chromate primer paint including preparation of surface before fabrication all as specified and directed.

Material and labour for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but n. exc. one brick complete all as specified and directed.

Supply and fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws as specified and directed

Material and labour for cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum in soft/ loose soil, getting out, returning, filling in, watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

Material and labour PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling, post hole, mass concrete, surface channel and drains and other similar work etc complete all as specified and directed.

JAGDISH KUMAR SEHGAL