SPL REPAIR TO TOILET BLOCK IN BLDG NO P-01, P-02 AND P-03 (OR BARRACKS) AT 1/5 GR (FF) UNDER GE (WEST), DELHI CANTT-10

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding /backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 450x300mm in vertical surface, (square/ rectangular) set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed bed/backing in CM 1:4 complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as spd & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area n.exc 1.5 sqm each complete all as specified & directed.

S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening and making good disturbed surfaces of jambs by matching with existing treatment complete all as specified & directed.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site complete all as specified & directed.

S&F aluminium anodised barrel tower bolt 150 mm size of extruded section complete all as specified and directed.

S&F aluminium handles cast type anodised 150 mm size complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F mild steel framed work as in door or gates of angle or other sections, cooler stands, with gusset plates rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel sheeting or other covering, running rails and guides) and hanging, fastening and fixing complete conforiming to Fe 290 Gde E-165 complete all as specified and directed.

S &F factory made 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I). klin seasoned and chemically pressure treated complete all as specified and directed.

M&L 20mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as spd and directed.

M&L 25mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as spd and directed.

S&F in repair Chromium plated brass long body bib tap fancy type 15 mm bore dia complete all as specified and directed.

S&F in repair 15mm bore angle valves, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle, complete all as specified and directed.

S & F 15mm bore brass chromium plated wall mixer with connection to the over head shower arrangement complete all as specified and directed.

S&F in repair for Brass Chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified.

S&F CP Grating doom 125 mm dia with or without waste hole complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts complete length 600mm complete all as specified and directed.

S&F in repair 32/40mm bore waste pipe for urinal and basins etc complete all as specified and directed.

S&F fancy type brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair 100mm dia CI P or S trap fixed to wall/floor with lead joint complete all as specified and directed. (Height of bldg upto 4th story).

S&F in repair 100mm Cast iron soil, waste and vent pipes in any length with or without ears, with lead joints, laid in trenches or fixed to wall in repair complete all as specified and directed. (Height of bldg upto 4th story).

S&F 100mm bore CI vent cowl complete all as specified and directed. (Height of bldg upto 4th story).

S&F 100mm bore CI tee, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fixed with lead joint complete all as specified and directed. (Height of bldg upto 4th story).

S&F in repair 75mm dia CI P or S trap fixed to wall/floor with lead joint complete all as specified and directed. (Height of bldg upto 4th story).

S&F in repair 75mm dia CI bends or diminishing pieces fixed to wall/floor with lead joints complete all as specified and directed. (Height of bldg upto 4th story).

S&F in repair 75mm Cast iron soil, waste and vent pipes in any length with or without ears, with lead joints, laid in trenches or fixed to wall in repair complete all as specified and directed. (Height of bldg upto 4th story).

S&F 75mm bore CI tee, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with lead joint complte all as specified and as directed. (Height of bldg upto 4th story).

S & F stack clamp made of 50 mm X 5 mm flat iron and 16 mm dia round iron stay including nut bolts and securing ends of stay to wall or roof suitable for 110 mm bore pipe complete all as specified and directed. (Height of bldg upto 4th story).

S&F in repair vitreous china white wash hand basin ovel shape under counter complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) , white and connection with cistern complete all as specified and directed.

S&F in repair Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved colour and as per existing model complete all as specified and directed.

S&F in repair rotational moulded polythelene water storage tank (cylindrical, vertical with closed top) 1000 ltrs capacity (ISI Marked) incl necessary fitting like tank cover, nipple, socket etc, hoisted and fixed in position complete all as spd & directed.

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms/) complete all as specified and directed.

M & L Rendering 12-15mm thick in ready mix on brick work or concrete surfaces including taking down cement plaster complete all as specified and directed. (Height of bldg upto 4th story).

M & L Rendering 5mm thick in ready mix on ceiling to be finished even and fair (without using extra lime or cement) as in patch works or whole work including taking down cement plaster complete all as specified and directed.

M & L preparation of new surfaces plastered of wall and apply two coats of white wash complete all as specified and directed.

S&F in repair cast copper alloy, chromium plated Jet spray with 1mtr ABS body pipe complete all as specified and directed.

M&L preparation of newly plastered surfaces and applying two coat of white wash on ceiling surface complete all as specified and as directed.

M&L for powder coated Anodised aluminium frame for doors, windows, ventilators, grill, partitions, sliding tracks, aluminium section for shutters suitable for two/three/four track window and aluminium section sliding members incl all necessary fittings and fixtures, jointing cleats, rubber packing etc complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, side hung type with/ without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2 Nos) suitable handle (1 No) complete all as specified and directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spd & directed.

S&F 4.0 mm thick figured glass/ pin head type and glazing in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair 10 ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.

M&L for 110mm bore PVC (SWR) pipe conforming to relevant IS single socketed in any length with rubber ring joint and fixed to wallor floor complete incl taking down old rain water pipes complete all as specified and directed.(Height of bldg upto 4th story).

S&F 110mm bore PVC (SWR) bends any radius all as specified and direction

M&L for Marble work table rubbed and polished bothe face for urinal partition /wall lining (veneering to wall) 25mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

S & F in repairs for 15 mm bore brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

M&L for 20mm thick, granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms, WHB platerform and like in 15mm tihck cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed.

S&F false ceiling with powder coated GI grid of size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall around of size with and including 4mm thick fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fixture etc including dismentling old ceiling board complete as per manufacturers instructions complete all as spd & directed

Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc.

Material and labour for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable 1.5 Sqmm size 1100 volts grade in box of suitable thickness and providing with brass screws and cup washers including single core multi stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :-

(a) One light/fan/bell point controlled by one way switch 6 amps.

(b) One 3 pin 6 Amps socket outlet point controlled by one way switch on independent board.

Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 2.5 Sqmm size 1100 volts grade in new metal flush box of suitable thickness fixed with brass screws and cup washers including single core multi stranded FRLS copper conductor 2.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 15A Indepentent board

S&F of switch piano type 6 amps single pole one way complete all as specified and directed.

S&F of switch piano type 16 amps single pole one way complete all as specified and directed.

S&F of socket outlet multipurpose 2/3 pin 6 amps flush button type complete all as specified and directed.

S&F of socket outlet multipurpose 2 in 1, 6 and 16 Amps complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed.

S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete all as specified and directed.

S&F of SPN MCB 40 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.

S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade complete including connection all as specified and directed.

ETERNITY PROJECT (BID ID -3389564)

Chandramauli Engineers Pvt. Ltd. (BID ID -3397927)

M/S Davinder Kumar (BID ID -3398143)

Kunal Construction Co. (BID ID -3387129)

M/S Parmod Johar (BID ID -3393690)