Repair/Maintenance of ceiling fans, exhaust fans, energy meter, prepaid meters and geysers at AFS Amla

Amount

Taking down ceiling fan carefully from any height of any size type and make after disconnecting the electrical connections and refixing back after carrying out servicing overhauling painting/rewinding works etc, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins as required complete all as directed.

Taking down exhaust fan carefully from any height of any size type and make after disconnecting the electrical connections and refixing back after carrying out servicing /overhauling/ painting/rewinding works etc., including clearing of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins as required complete all as directed. Note for item No 1 & 2: The cost of these items is deemed to be including only taking down, cleaning and refixing. The cost of servicing/overhauling/painting/rewinding works etc., will be measured and paid separately under appropriate items.

Material and Labour for transporting the unserviceable ceiling fans to local work shop opening the motor and taking out the old burnt out copper winding wire from the fan of 1200 mm sweep and rewinding by using same gauge of copper wire insulating and varnishing including reassembling and testing complete all as directed.

Material and Labour for transporting the unserviceable ceiling fans to local work shop opening the motor and taking out the old burnt out copper winding wire from the fan of 1400 mm sweep and rewinding by using same gauge of copper wire insulating and varnishing including reassembling and testing complete all as directed.

Material and Labour for transporting the unserviceable heavy duty exhaust fans to local work shop opening the motor and taking out the old burnt out copper winding wire from the fan of 300 mm sweep and rewinding by using same gauge of copper wire insulating and varnishing including reassembling and testing complete all as directed.

Material and Labour for transporting the unserviceable flame proof exhaust fans to local work shop opening the motor and taking out the old burnt out copper winding wire from the fan of 450 mm sweep and rewinding by using same gauge of copper wire insulating and varnishing including reassembling and testing complete all as directed.

Material and Labour for transporting the unserviceable flame proof ceiling fans to local work shop opening the motor and taking out the old burnt out copper winding wire from the fan of 1200 mm sweep and rewinding by using same gauge of copper wire insulating and varnishing including reassembling and testing complete all as directed.

Material and Labour for transporting the unserviceable flame proof ceiling fans to local work shop opening the motor and taking out the old burnt out copper winding wire from the fan of 1400 mm sweep and rewinding by using same gauge of copper wire insulating and varnishing including reassembling and testing complete all as directed.

Material and Labour for transporting the unserviceable wall mounted fans to local work shop opening the motor and taking out the old burnt out copper winding wire from the fan of 300 mm sweep and rewinding by using same gauge of copper wire insulating and varnishing including reassembling and testing complete all as directed.

Material and labour for painting of ceiling fans of size 1200/1400 mm sweep complete including down rod and blades with two coat of synthetic enamel paint by spray painting, filling cavities with filler materials such as metal paste etc., after cleaning all dust complete all as directed and writing MES No with black enamelled paint all as directed.

Material and labour for painting of exhaust fans of size 300mm to 450 mm sweep complete including mounting frame and blades with two coat of synthetic enamel paint by spray painting, filling cavities with filler materials such as metal paste etc., after cleaning all dust complete all as directed and writing MES No with black enamelled paint all as directed.

M&L for replacing ball bearing of ceiling fan/wall mounted fan of any size including oiling greasing complete reassembling & testing complete all as directed by Engineer-in-Charge.

M&L for replacing ball bearing of exhaust fans of any size including oiling greasing complete reassembling & testing complete all as directed by Engineer-in-Charge.

M&L for replacing bush made out of Gun metal suitable for ceiling fan of any size /make complete all as directed by Engineer-in-Charge.

M&L for replacing bush made out of Gun metal suitable for exhaust fan of any size /make complete all as directed by Engineer-in-Charge.

S & F 12-inch length Smart MS Anti suicide down rod manufactured by M/s Gold Life /Anti suicide down rod with device including buzzer manufactured by M/s Safe Halo, heaving colour if white/brown/ivory for ceiling fan of any size make complete all as specified and as directed.

S & F 18-inch length Smart MS Anti suicide down rod manufactured by M/s Gold Life / Anti suicide down rod with device including buzzer manufactured by M/s Safe Halo, heaving colour if white/brown/ivory for ceiling fan of any size make complete all as specified and as directed.

S & F 24-inch length Smart MS Anti suicide down rod manufactured by M/s Gold Life / Anti suicide down rod with device including buzzer manufactured by M/s Safe Halo, heaving colour if white/brown/ivory for ceiling fan of any size make complete all as specified and as directed. Note for item no 16 to 18: - If the load on the fan exceeds 22 Kg, the device/rod shall release the spring to expand. The test certificate for the same is to be produced at the time of execution work.

Supply and fix in repair capacitor 4.0 MFD 230 Volts with PVC clamps suitable for exhaust fans complete all as specified and directed

Supply and fix in repair capacitor 2.5 MFD 230 Volts with PVC clamps suitable for ceiling fans complete all as specified and directed

S & F in repair hanging clamp with provision of iron hook made out of MS flat suitable size for ceiling fans all as per site requirement including nuts bolts washers etc complete all as specified and as directed.

Supply and fix in replacement of clamp with rubber bush including nut/bolts, safety pin complete all as specified and as diretced by Engineer-in-charge.

Supply only GI tubing light grade size 40 mm complete

Fixing only of GI tubing light grade size 40 mm on wall for hanging of ceiling fan including civil works , cutting of GI tubing and clamps with nuts , bolts & washers and making good surface area complete all as specified and directed by Engr - in - Charge .

M&L for making of hole in exsiting wall for exhaust fan size 250 / 300 mm dia including all civil work and making good surface area as per existing all as specified and directed by Engr - in - Charge .

Supply and fix in repair mettalic exhaust fan blade of any size/sweep as per sample complete all as specified and as diretced by Engineer-in-charge.

Preventive maintenance/servicing of storage type electric water heater (Geyser) of capacity 25/35/50 ltrs for the task as mentioned in Appdx “A” of PS including taking down & replacement of all defective parts such thermostat, safety valves fusible, plug heating elements, storage tank, insulating material PRV dead wt valve etc., as and when required complete all as directed for any make. (i) All the spares replaced will be measured and paid separately as supply only. Cost of labour charge for taking down & replacing the unserviceable spares is deemed to be included in the quoted rate and no extra claim is entertained on this account. (ii) The mechanic/service person should attend all the break down calls immediately on priority for carrying out necessary maintenance/servicing/replacement of the unserviceable spares as and when directed.

Supply only heating element of Geysers of following rating as required at site including rubber washers (Triangular base,ISI marked)

Supply only heating element of capacity 1.5 KW having 115 mm dia base with 6 hole with diapharm washer suitable for existing make of 25/35 ltrs Geysers

Supply only thermostat ISI marked suitable for the Geysers 25 ltrs capacity,20 Amps, 240 Volts AC, fixed type,300 mm long or nearest size, Set at 90+/-6 degreeC as per sample (ISI marked)

Supply only thermostat ISI marked suitable for the Geysers 50 ltrs capacity 20 Amps, 420 Volts Ac fixed type, 450 mm long or nearest size, set at 90 +/-6 degree C as per sample (ISI marked).

Supply only geyser bottom assembly of 6 hole/7hole/9 hole as per existing complete including nuts,bolts and rubber gasket for existing make of 25/35 ltrs Geysers as per site requirement.

Supply only PVC reinforced connections pipe with brass hexagonal adapters both side. Suitable for 15mm dia pipe 45cm long for cold water as per requirement..

Supply only PVC rainforced connections pipe with brass hexagonal adapters both side. Suitable for 15mm dia pipe 60cm long for cold water as per requirement.

Supply only stainless steel flexible connections pipe with brass hexagonal adapters both side. Suitable for 15mm dia pipe 45cm long for HOT water as per requirement.

Supply only stainless steel flexible connections pipe with brass hexagonal adapters both side. Suitable for 15mm dia pipe 60cm long for HOT water as per requirement.

Supply only Geysers inner water tank made of copper suitable for 25 ltrs. capacity and check of water tightness and testing complete all as directed by Engr-in-Charge.

Supply only in replacement of indicator bulb (Red & Green) ISI Marked for geysers of approved make complete all as specified and directed.

Supply only Pressure release safety valve suitable for Geysers 25 / 50 ltrs capacity.

Supply only Non return valve 15/20 mm dia made of bronze suitable for existing size of geysers ISI marked heavy duty fixed in repairs complete all as specified and directed.

Supply only thermostat switch for geysers of 25/35/50 Itrs capacity (ISI marked) complete all as specified and as directed. Make:- USHA /Bajaj/Racold

M&L in repairs cable with copper conductor PVC round sheathed 3 core 2.5 Sqmm with stranded conductor 1100 V grade from socket/switch to geyser.

Supply and fix in repair Sheet metal enclosure single pole and neutral with two pin and earth plug and socket complete with one MCB SP 20 Amps and plug top complete .

Supply & Fix in repair 3 pin plug top, 16 amp capacity, 240 VAC, heavy duty, ISI marked

Supply and fixing in repair grouting bolts on wall with T head 10 mm dia 100 mm long (2 Nos) for fixing geyser of capacity 25/35/ 50 ltr all as specified and directed.

Blank

Blank

Supply and fix in repair MCB DB SPN 4 way double door sheet metal enclosure 240 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc., as required. (But without MCB/RCCB/insulator) complete all as specified and as directed.

Supply and fix in repair MCB DB SPN 8 way double door sheet metal enclosure, 240 volts on surface/recess, complete with tinned copper bus bar, neutral bus bar earth bar, din bar, interconnections, powder painted including earthing etc., as required . (But without MCB/RCCB/Insulator) complete all as specified and directed.

S & F for 'C' curve MCB single pole & neutral 32 Amps 240 Volt 50 Hz 10KA

S&F 'B' curve MCB SP 6 to 32 Amp 240 volt 50 Hz 10 KA suitable for lightening and other domestic load

S&F 'C' curve MCB SP 6 to 32 Amp 240 Volt 50 Hz 10 KA suitable for motor and other inductive load

S&F 'B' curve MCB SP 40 Amp 240 volt 50 Hz 10 KA suitable for lightening and other domestic load

S&F 'B' curve MCB TP 25 to 63 Amp 240 volt 50 Hz 10 KA suitable for lightening and other domestic load

S&F 'B' curve MCB TPN 16 to 32 Amp 240 volt 50 Hz 10 KA suitable for lightening and other domestic load

S&F 'B' curve MCB TPN 40 to 100 Amp 240 volt 50 Hz 10 KA suitable for lightening and other domestic load

M & L in repair for submain wiring with approved colour coding as per IS with single core PVC insulated but unsheathed FR cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked drawn through heavy duty ISI Marked rigid PVC conduit with all accessories etc including making good the surface on wall etc complete all as specified for the following size:- (Note- 3 run of FR cable & one run of heavy duty rigid PVC conduit will be measured as one unit )

2 runs of 4 Sqmm size main cable and one run of 4 Sqmm size earth continuity conductor

Supply and fix in replacement of LED driver for existing 2'x2' 36/40 W LED fittings 240Volts 50Hz as per site requirement suitable for existing make of ceiling light complete all as directed. Make: Bajaj/CG/Havells from the makes specified in 'List of Make' as approved by GE.

Supply and fix in replacement of LED driver for existing bollard lights of 8 to 10 W LED 240Volts 50Hz as per site requirement suitable for existing make bollard light complete all as directed. Make: Bajaj/CG/Havells from the makes specified in 'List of Make' as approved by GE.

Supply and fix in repair environment friendly high efficiency with better thermal management type building LED security light fittings 35watt integral electronic driver connector block etc., complete with all accessories internally prewired including necessary mounting arrangement, provision of 2 core 1 sqmm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed.

S & F in repair for wall mounted LED 18/20 W CRCA fitting 230 V with extruded aluminium heat sink provided for efficient heat dissipation and integral electronic driver connector block etc., complete with all accessories internally prewired including necessary mounting arrangement, provision of new 2 core multistranded copper conductor of size 0.5 sqmm from ceiling rose to fitting including necessary polycarbonate LED tube 4 feet, 18/20 W complete all as specified and directed.

Supply and fix in repair LED tube rod 4 ft 20 watt made up of polycarbonate material including testing complete all as specified and directed.

S & F LED 9W inverter bulb, works on AC suply in Normal mode and DC supply in Inverter mode, with inbuilt battery back up of upto 4 hours, high efficiency, high lumes output B22 caps available

S & F LED Filament Lamp 4 W Candle 430 lumen output 2700k colour temp with E27 caps suitable for exising jhoomer complete all as specified.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. light grade protection pipe for earth lead complete with charcoal and common salt in alternate layer including watering arrangement with galvanized iron pipe medium grade 20mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. (Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.)

Supply & fixing in repair switch piano flush type single pole one way 6 amp complete ISI mark

Supply & fixing for Socket outlet multipurpose having provision for 2 in 1, 3 oin 5 Amp piano flush type complete all as specified.

Supply & fixing Switch piano flush type single pole one way, and 15 amp complete ISI marked.

Supply & fixing for socket outlet 2 in 1, 3 Pin 5 Amps and 15 Amps flush type .

Supply & fixing for Bell push flush type 5 Amp .

Supply & fixing for stepped type electronic fan regulator socket type on the existing phenolic laminated sheet etc as required

Supply & fix in repair Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal all as specified and directed.

Supply & fix in repair Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal all as specified and directed.

Material and labour for servicing of air blast type electrically operated chimney installed in cook houses by dismantling complete filter assemblies / ducts and connected items for descaling with suitable chemical solution / caustic soda including reassembling, testing and painting with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade complete all as specified and directed.

Material and labour for dismantling unserviceable blower motor 3 phase 415 volts 1400 PRM 3 HP from existing pillar and transporting to civil work shop for repair/rewinding and reassembling the same on foundation and testing includes the followings:- (i) Opening/dismantling electric motor and removing burnt copper winding from starter and cleaning. (ii) M & L for rewinding starter with same gauge of super enameled copper winding wire including fixing of insulating papers, varnishing complete. (iii) S&F of ball bearings to match existing Nos. 2 (Make: SKF)

Disconnecting / Taking out carefully energy meter / meter box of any Make/Capacity from site and refixing the same location/other location as desired complete all as specified and directed.

Supply and fix louvers shutter section fabricated out of GI Sheet of 22 gauge suitable for 230 / 300 / 450 mm dia Exhaust Fan complete.

M&L in repairs cable with copper conductor weather proof flat twin core 1.5 Sqmm with stranded conductor 1100 V grade complete.

Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

ROYAL ENTERPRISES