PROVN OF 01 TOILETS FOR COURSE STUDENTS AT KURUKSHETRA TRG AREA AND WATER PIPE CONNECTION WITH TAP FROM OVERHEAD TANK TO KITCHEN OF JCOS OR OLD MD ACCN BLOCK NO 49 TO 53 125 TO 138 323 AND 325 TO 327 AND SPL REPAIR TO ROAD IN FRONT OF AGE BR STOR

Amount

Excavation in trenches n.exc 1.5M wide and n.exc 1.5m in depth for foundations,etc., or for shafts, wells, cesspits, manholes, pier holes etc, n.exc 10sqm on plan area and getting out of soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm thick each layer in soft/loose soil complete all as specified and directed.

Removing excavated material/surplus soil to a distance n.exc 50 M and depositing where directed at a level n.exc 1.5 M above the starting point complete all as specified and directed.

M&L for Cement concrete type E2, 1:5:10 (using 40mm graded stone aggregate) in fdn filling and mass concrete complete all as specified and directed..

M&L for RCC 1:2:4 type BO (12.5mm graded aggregate) in foundations, incl rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M & L for reinforced cement concrete 1:2:4 (Nominal mix) (using 20 mm graded crushed stone aggregate) as in columns complete all as specified and directed.

M & L for reinforced cement concrete 1:2:4 (Nominal mix) (using 20 mm graded crushed stone aggregate) as in roof beams, lintels etc complete all as specified and directed.

M&L for RCC 1:2:4 type BO (12.5mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L for rough finished flat form work to sides of concrete foundations, footings, base of columns, raft and raft beams, sides and soffits of foundations and plinth beams and similar works complete all as specified and directed.

Formwork to sides of pillars,posts,struts,piers,cloumns and stanchions rough finish surfaces of concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, lintels,cantilevers etc complete all as specified and directed.

M&L for rough finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n.exc 200mm thick complete all as specified and directected

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooking for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

All as per itme No 13 above but 5mmdia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for brick work with Sub class 'B' brick, straight or curved on plan exc 6M mean radius built in CM (1:6) complete all as specified and directed.

M&L for brick work in CM 1:4 with sub class 'B' bricks strainght or curved on plan to any radius in half brick thick wall complete all as specified and directed.

M&L for 15 mm thick cement plastering in cement mortar (1:4) on fair/ unfair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick cement plastering in cement mortar (1:6) on fair/ unfair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed..

M&L for 5 mm thick cement plastering in cement mortar (1:4) in ceilings on fair/ unfair faces of concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for Non skid coloured ceramic tiles7mm to 8mm thick area of each tile exceeding .11 Sqm and nexc .18 sqm in floors over 15mm thick screed bed or bedding in CM(1:6) set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surface 300X200X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.rendering over 15mm thick on fair face of brick work or concrete face complete all as specified and directed.

M&L for hardcore of gauge exc 63mm but n.exc 100mm, deposited, spread and levelled in layers n.exc 15cm thick complete all as specified and directed.

M&L for 100 mm thick plain cement concrete 1:4:8 type D-2 using 40 mm graded stone agg as in sub base of floor over well rammed and consolidated surface complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer of CM 1:6 for laying floor tiles complete all as specified and directed.

M&L two coats of cement base paint over a coat of alkali resistant primer incl preparation to new surface of walls complete all as specified and directed.

M&L Preparation New plastered surfaces and applying two coats of distemper oil emulsion including chalk whitening preparatory to distempering on surfaces of walls complete all as specified and directed.

M&L for preparation newly plastered surfaces of ceiling and applying two coats of white wash all as specified and directed.

S & F PTMT grating 125 mm dia complete all as specified and directed.

S & F 15 mm bore chromium plated pillar aps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply only 10 litres Capacity white coloured PVC flushing cistern low level SLIMLINE or equivalent make/ model with all accessories in repairs including taking down old flushing cistern

S & F in repair chromium plated 15 mm bore Stop valves, angle valves , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestral pattern with P or S trap white fixed etc complete all as specified and directed.

S&F Vitreous Chine urinal partition white of size 310 X 700mm complete all as specified and directed.

S & F Vitreous China Ware Wash hand basin white, flat back, size 630 x 450 mm size (flat back or angle back type)including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S&F 16 mm outer dia 3-layer PP-R polypropylene random copolymer) concealed pipe SDRT-4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply incl; all PP-R palin & brass threaded polypropylene random fitting fixed complete to walls ,ceilings or in floors complete all as specified and directed.

S&F 20 mm outer dia 3-layer PP-R polypropylene random copolymer) concealed pipe SDRT-4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply incl; all PP-R palin & brass threaded polypropylene random fitting fixed complete to walls ,ceilings or in floors complete all as specified and directed.

S&F mirror Self in bathroom as per sample complete all as specified and directed

S&F CP anodised tubular hanger double coat hook etc. Make Jaguar cat-AQN 7761

S&F CP anodised toilet Paper Holder recessed type Make Jaguar cat CAN CHR 1551 etc.

S & F CP hand shawar (health faucet) with 1.0 mtr long easy flex tube for 15 mm bore all as specified and directed. Make Jaguar cat ALD 565

S & F PVC connection 450 mm long and 15 mm dia., to flushing Cistern/ sanitary fittings with PTMT nuts connections at the ends complete all as specified and directed.

S & F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F factory made solid panel PVC door shutter, 30mm thick(styles)consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded woodgrain printed PVC 'C' channel having a PVC sheet strip of 5mm thickx15mm wide width stuck inside with solvant cement for stiles andwood grain colour PVC sheets for top rail, lock rail & bottom rail on eitherside & as gapinsert for top rail & bottom rail panelling of plain woodgrain coloured sheet to be fitted in the MS frame welded/sealed to the stiles & railswith suitable PVC sheet beading and jointed together with solvant cement,complete all as specified and directed. ( hardware fitting shall be measured seperatly ).

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm woode grain cloured colour PVC sheet reinforced with MS square tube, complete all as specified and directed.

S&F powder coated aluminium glazed side hung door shutter including alu powder coated frame of section 100x44x2mm and bottom rail of 44.5x99x1.8mm including 5.5mm thick tinted sheet glass ordinary quality with glass film on top portion ang Novapan board on bottom portion incl all necessary suitable handles, tower bolts, SS butt hinges (3No) fixed with cadmium plated screws, 1 No mortice brass lock 100mm, 4 lever (vertical type) with hydraulic door closer aluminium (die cast body) design No 3, universal type for each shutter complete all as specified and directed.

S & F powder coated aluminium ventilators/louvers frame section of 65 x 44X 1.5 mm thick incl 4 mm thick 75 mm wide frosted glass strip louverrs, in aluminium wire mesh fixed into groove in the frame section with rawal plug and screw or wire expansion hold fasteners etc complete all as specified and directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 125 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

M& L 10mm thick rendering on fair faces of brick wall or concrete surfaces in cement motar 1:6 and finished even and smooth using extra cement by using water proof compound complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for roof treatment with polymeric water proofing membrane as under:- (a) Applying bituminous primer conforming to IS 3384-1965 @ 0.30 Kgs/sqm. (b) APP modified bitumenous membrane 3 mm thick with non woven polyester core of weight not less than 3.2 to 3.5 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100 mm shall be sealed / fused by flame torch application as per manufacturer instructions. (c) Applying two coat of bituminous bases aluminium paint @ 0.2 kgs/sqm over APP membrane.

All as per item No 58 above but on vertical surfaces over a coat of hot bitumen 85/25 grade @ 1.00 kg/Sqm

S & F 1000 ltr Rotational moulded three layered polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 15mm dia gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.

S&F20mm dia gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.

M&L Precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

S&F Vitreous China Half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded broken stone aggregate) as in floor/plinth protecton , finish even & smooth without using extra cement complete all as specified and directed.

S & F CP Brass chromium plated tubular towel rail 20 mm dia 60 cm long between flanges complete all as specified and directed.

S&F in 100 mm bore stack clamps out of 50x5mm by flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed.

S & F 150 mm salt glazed stone ware drain pipe laid in trenches and jointed complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipe including packing under, and hunching against the sides of pipes after they are laid and tested for 150mm dia pipe complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

M&L Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.

M&L providing glossy designer chequered tiles 20 cm X 20 cm X 22 to 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and no pigment laid over and including screed bed or bedding layer 20 mm thick in CM 1:4 as in floors complete all as specified and directed

M & L Maroom/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed.

S&F bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F of 500 ltrs capacity Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I

All as per item No 01 above but exc 1.5 m wide and n.exc 3 m in depth.

M&L for 200 mm bore salt glazed stoneware drain pipe grade ‘A’ laid in trenches complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipe including packing under, and hunching against the sides of pipes after they are laid and tested for 200mm dia pipe complete all as specified and directed.

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 200 mm bore drain pipe.

M&L reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in Chhajja complete all as specified and directed

M&L for rendering 10mm thick in CM 1:6 on brick or concrete surface, finishing even and smooth without using extra cement complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 20mm thick screed bed in CM 1 :6 complete all as specified and directed.

M&L for applying one coat of Altec putty finish to obtain smooth fnished wall surfaces complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying two coats of plastic emultion to walls with distemper oil emulsion complete all as specified and directed.

M&L three coats of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed. .

M&L for two coats of cement based paint over a coat of white wash after preparation of new plastered surface.

S&F 100 mm bore Cast Iron ‘P’ or ‘S’ trap complete all as specified and directed.

S&F 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed.

S&F 100 mm dia Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 100mm dia Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with internal fitting, push button operated type with and including bracket, PVC flush pipe etc complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and directed.

S&F vitreous china wash basin, white flat back size 580mmx450mm, excludings taps, waste, chain and plug and porcelain stopper but including brackets in repairs, complete all as specified and directed..

S&F PTMT waste coupling of 32mm dia for wash basin complete all as specified and directed.

S&F 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks complete all as specified and directed.

S&F Stainless steel towel ring square Mk: Jaguar Cat No 35721 or equivalent as approved by GE

S&F powder coated anodised aluminium window and ventilator fixed type/sliding with 6mm thick acid texture approval design including necessary joining cleats glazing clips,rubber packing,anodised aluminium snap beading,screws etc complete all as specified and directed.

S & F 100 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-22.

S & F Aluminium anodised handles of extruded section and fixed 125 mm long.

M&L for 100 mm thick cement concrete 1:2:4 type B2 using 40 mm graded stone aggregate as in hard standing surface finished even and smooth with out using extra cement complete all as specified and directed

Taking down chowkats or frames not exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified and directed.

Cutting holes in brick walls exc half brick but not exc one brick built in cement mortor or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

M&L glazed coloured ceramic tiles in vertical surface size 350x250x7mm/ 450x350x7mm thick glazed tiles such as skirting and riser over and including rendering fair faces of brick work 10 mm thick in CM 1:4 complete all as specified and directed

S&F in repairs CP Jet Spray/ Health faucet with 1.5 mtr 15 mm bore with tube and hook complete all as specified and directed. Make-Jaguar or equivalent.

S&F in repairs, PVC valveless syphonic action type low level flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle including bracket complete all as specified and directed

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) excluding taps,waste,chain and plug and porcelain stopper but including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S & F in repair Urinal Pot of size 355X345X535 mm Make Jaguar cat N URS WHT 13261 complete all as specified and directed.

S&F PVC waste pipe of bore 32mm for urinal/WHB etc complete all as specified and directed.

S&F in repair Chromoium plated angular stop cock with wall flange, 15 mm bore complete all as specified and directed. Make Jaguar cat CQT23059

S&F in repairs Glass shelf of size 450 mm x 150 mm with CP guard rail below mirror for keeping soap box etc complete all as specified and directed

S&F in repair CP Soap dish in bathroom make Jaguar cat ARN 7731 complete all as specified and directed

S&F in repairs brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections inclusding necessary packing, union and cap and fixed complete all as specified and directed.

S&F 50 mmdia PVC Pipe fixed complete to walls, ceiling or in floor complete all as specified and directed

M & L Cutting openings through walls for door, window and other openings or enlarging existing openings, etc.,or cutting out defective masonary in cement mortar for under pinning including providing, fixing and removing, shoring ,cleaning and stacking stone and removing surplus to store and rubbish off the premises, complete all as specified and as directed.

M & L for Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 20 mm screed bed in CM 1:4 complete all as specified and directed.

Taking up or down steel 15 mm bore tubing and & connections including cleaning for refixing or removal to store and making good the disturbed surfaces complete all as specified and directed.

Taking up or down steel 20 mm bore tubing and & connections including cleaning for refixing or removal to store and making good the disturbed surfaces complete all as specified and directed.

Taking down cement or cement lime plaster, of any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:4 of brick work or concrete surfaces, finished fair and even complete.

M & L for preparing new surfaces plastered or unplastrered and applying two coats of OBD over a coat of alkali resistant primer on ceiling complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick below or above the ground floor etc complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 using 12.5 mm graded stone aggregate as in levelling course complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L Cement concrete type C-2, 1:3:6 using 40 mm graded crushed stone aggreates 100 mm thick as in flooring finished even and fair complete all as specified and directed.

M&L 50 mm thick Sand cushning below interlocking paver tile complete all as specified and directed. .

M&L Machine pressed precast concrete interlocking paver block any shape and size fixing with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed. .

M&L reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate as inColumns, pillars, piers, posts and struts complete all as specified and directed

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 complete all as specified and directed

M&L Cement concrete, type-B-I, 1:2:4 using (20 mm graded stone aggregate) 40 mm thick as in floors and brought even and smooth with extra cement complete all as specified and directed.

Surface excavation n.exc 30 cm deep and getting out in hard / dense soil.

M & L flush pointing to brick wall in CM 1:4 complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Forming contraction (dummy) joint 75mm deep X 10mm wide filled with sealing compoung Grade 'A', complete all as specified and directed.

M & L Plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified.

M&L Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Preparation of newly plastered surface of walls and applying two coats colour wash over one coat of white wash complete all as specified and directed.

Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed .

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L Hard core of gauge n.exc 63 mm, deposited, spread, levelled in layers not exc 15 cm thick, watered and well rammed to a true surface complete all as specified and directed .

Dismantling floor/wall tiling including cement mortar ( but not backing) removing of unserveable tiles from site and rubbish of the premises complete all as specified and directed .

S&F non skid ceramic coloured antiskid tiles 300x300x7mm thick in floors etc.Set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

Rendering 10mm thick in CM 1:4 to wall as a backing coat to dados.

Taking up or down GI tubing incl connections of 20 mm bore.

All as per itme No 148 above but 15mm bore

S&F medium grade galvanised iron 20mm bore with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed .

All as per item No 150 above but 15 mm bore

M/L for Granite slab (of any size) 20mm thick machine cut, bedded and jointed and pointed with white cement with addmixture of pigments to match the shade of granite including cutting,. Mirror polishing and edge rounded all as per specified for counter top WHB, Shelves and Cooking flatform and stair case etc.

S&F WHB cascad oval counter top WHB coloured 550 x 490mm make PARRYWARE code no.C0426

Excavating over areas exc 1.5m depth but n exc 3m depth and getting out of soil as directed

Demolition and breaking up drain pipe of any description up to 150 mm dia in CM 1:4 including demolition of cement concrete bedding and hunching complete all as specified and directed.

M&L for cutting 150 mm internal dia pipes into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required all as pecified and directed.

M&L for mild steel 6 to 8 mm dia and over mm dia TMT bars bent to shape required, including cranking, bending and binding with mild steel annealed wire not less than 0.9mm dia complete all as specified and directed.

M&L Mild steel plain sheet 1 mm thick covering to water tanks, water troughs, ducts funnels etc cut to size edges beaded if directed, holes punched incl round headed screws, clout nails or rivets and fixed to wood or steel member etc with plain 40 mm lap joints or welded/riveted seams incl bending, turning up, mitred angles, stopped ends,outlets etc as required all as specified and directed.

M&L for Fe 410-W (Gde E-250 quality A) Framed work as in doors or gates of angle or other section with gusset plates,rails,braces etc complete,drilled for fixing of steel sheeting or other covering. Doors,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening anf fixing complete all as specified and directed

M&L for point wiring with cable PVC insulated but unsheathed, 1.5 Sqmm, stranded copper conductor in and including PVC concealed conduit incl continuous earthing with cable PVC insulated 1.5 Sq mm copper conductor, MS box , including laminated top sheet cover,washer & screw all as specified and directed for the following (a) One light point controlled by one, one way switch.

All as per item item No .160 above but One exhaust fan point controlled by one, one way switch.

S & Fix switch piano (Flush type) 5 amps, 240 Volts, single pole one way complete all as specified and directed.

S&F ceiling rose, bakelite three terminal complete all as specified and directed.

Supply & fix LED tube light along with fixture,18W complete all as specified and directed

S & Fix sheet metal enclosure double door MCB DB, SPN 4 way complete all as specified and directed.

M&L for GI tubing 25-32mm dia medium grade, mounting bracket and end nipple/nozzle of the bracket of size suitable to house the light fittinhg , with its Galvanised Flat Iron clamps with suitable set of nuts, bolts, washers etc complete all as specified and directed

Supply and fix street light fitting LED type of 20 watt New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs (8x2.5 HPLED/LS) as light source and electronic driver etc complete all as specified & directed (Make C&S / WIPRO / Bajaj / Phillips / Havells) (Note : warrenty of PCB @ 3years)

S & Fix MCB SPN 6-20 Amp 10 KA 240 Volts complete all as specified and directed.

S & Fix MCB, SP 6 to 10 Amp 240 Volts rating complete all as specified and directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, with aluminium conductor 1100 V grade, laid in trenches/ along poles, ducts or through sleeve for size 10Sqmm 2 core complete all as specified and as directed (connection from Tech Block Panel board) : - Note: Earth work, sand cushioning and bricks will be measured and paid separately under relevant items Make:- Havells / polycab / cci / nicco / Gloster

Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments.

Supply and laying flyash building bricks laid in trenches for LT cable protection with length of brick perpendicular to length of cable complete all as specified and directed.

Boring across the road/hard surface horizontally with machanical boring equipments not less than 50 mm bore dia all as specified and directed.

S&F MCB SPN 6-32 Amps complete with necessary elect connections all as specified at the exisitng DB with two way DB Enclosure with necessary elect connections complete all as specified and directed.

S&F 40 MM bore Galvanised steel tubing light grade including all fittings, laid in trenches , fixed to walls or on poles etc after taking out the rusted out/wornout pipes complete all as specified and as directed

S&F PP-R 3 layer polpropylen random copolymer concealed pipes SDR- 7.4 (PN- 16) un Stabilized and antimicorbial fsion welded having thermal stability of for hot & cold water supply all PPR plain & brass threaded polypropylene of size 25 mm dia (OD) and random fittings laid in trenches complete all as specified and directed.

S& F of PP-R gate valves (Brass inlet) as per requirement of size 25 mm dia complete all as specified and directed.

Making connection of PP-R distribution branch with PP-R main of Size 25 mm OD by providing and fixing tee including cutting and making fusion joint etc all as specified and directed.

M & L for construction of brick masonry value pit chamber of size 600mm x 600mm x450mm including necessary excavation and earth work in any type in CM (1.4) complete with valve pit cover (steel) with locking arrangement complete all as specified and directed.

M&L for cutting holes instone walls builts in cement mortar for inserting pipe and making good dismantated portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and directed.

S&F 20mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for PPR pipe and fixedcomplete all as specified and directed

Making connection of PPR distrubtion branches with PPR main of following outer dia of pipe 16 to 40mm size by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed.

S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

S & F of light fittings (2Ft) with wall mounted LED pattern with polycarbonate housing & integrated electronic driver of 9W cap T5(max lenght upto 600mm) complete all as specified and directed. Make :- (Make C&S /WIPRO/ CG / Phillips / Havells).

M&L for taking down carefully old UNSV aluminium point wiring with wooden batten and all accessories of(light, fan, socket or power) such as switches socket ceiling rose, fan regulators, light fitting, etc and making good disturb surface complete all as specified and directed.

All as per itme No 160 above but for one 5/6A Multi socket point controlled by one, one way switch on independent bd complete all as specified and as directed

S&F socket out let (Flush type) 5 pin 5 amps. (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F in replacment sheet metal enclosure MCB, DB, SPN 8 way, factory double door made all as specified and directed Make Standard/ Indo asian/ havells

S & F in replacment MCB SPN 16 TO 32 Amp 10KA 240 Volts Make Standard/ Indo asian/ HPL/ havells

S & F in replacment MCB, SP 6 to 30 Amp 240 Volts rating Make Standard/ Indo asian/ HPL/ havells

M&L in repairs , for earthing with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground(earth pit not less than 2.25 mtrs deep below ground level)with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers protected with & including 15 mm dia light grade GI pipe necessary excavation and earth works, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with Pre cast RCC (1:2:4) cover, GI funnel with mesh test point, testing & commissioning Complete all as specified and directed..

M/s BLUE WHEEL AGENCIES

S J ENTERPRISES

M/S K MURALIDHARA PATRA

V.Venkata Ramaiah

M/s Bapujee Builders and Traders

M/s TECH TEAM