PANEL ERECTION and CABLE LAYING WORK FOR TUBEWELLS and OTHER LOADS ETC AT SPORTS STADIUM GROUND NEAR HEALTH CENTER

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125 A, 16 KA,TPMCCB. (Legrand/L&T/Havells/Schneider)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 50 sq. mm 3-1/2 core. (Cable Make - Polycab/Havells/Grandlay/Gloster)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core. (Cable Make - Polycab/Havells/Grandlay/Gloster)

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 50 sq. mm 3-1/2 core

Incoming : - 100 Amp. MCCB - 1 No.

Outgoning : - 63 Amp. MCCB - 1 No. & 32 Amp. MCCB - 2 No. [Cat. B. Pannel Cubicle Type]

Supply and fixing of factory fabricated M.S. box in existing sunk of size 600mm x 480mm x 200mm deep with Godrej type almirah, cover with handle etc. fabricated from 18 SWG (1.25mm) M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry, din rail with nutbolt and D.P./T.P.N.; fixing arrangements and provision for compartment for loose wires openable housing on the top/bottom and hold fast etc. including supply of all material, labour, T&P etc. required for proper completion of the work.Including consrtuction of 600x600x300 mm size C.C.foundation Block with jointing the 600 mm M.S.Legs on all the four corners connected with foundation to M.S. box by dash fastner and welding respectively along with painting with synthetic enamel paint and primer on M.S.leg as per directions of Engineer-in-charge.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole and neutral. (Legrand/Havells/Hager/Schneider/L&T)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

PRINCE ELECTRICALS AND CO