13-TN/EE/PANDD/25-26

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar 15 mm thick plaster [Ref : P.W.D.(Bldg.), p-189 it no -1/ii/b + 3rd corrigendam addenda ]

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (i) 3 mm thick (weighing 7.4 kg/Sq.m) [Ref : P.W.D.(Bldg.), p- 205 ,it no -1/I ]

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finishedconforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).Top , bottom & side member. [Ref : P.W.D.(Bldg.), p-234 it no -1/I/i]

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles includin roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor Other than Coloured decorative including white [Ref : P.W.D.(Bldg.) p-64 it no -34/A/II+ 3rd corrigendam addenda]

M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete) In ground floor [Ref : P.W.D.(Bldg.) P- 165 IT NO -17]

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) [Ref : P.W.D.(Bldg.) P- 165 IT NO -17] P - 198 IT NO -5]

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) Two Coats Water based interior grade Acrylic Primer [Ref : P.W.D.(Bldg.) P-7 IT NO -7/B/I]

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) Luxury Quality [Ref : P.W.D.(Bldg.) P-201 IT NO -4/II

Washing and cleaning with oxalic acid powder using 33 gms./sq.m. [Ref : P.W.D.(Bldg.) P- 76 IT NO -6/a]

Washing and cleaning with soap water and rubbing with oil cloth in all types of floor and dado. [Ref : P.W.D.(Bldg.) p 77 IT NO -12]

Labour for boring through any type of soil for sinking tube well of required dia. with top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete. For depth upto 250 metre for 150 mm dia. Tube well with top enlargement of 250 mm dia.(upto 50 metre). (i) First 50 metre [Ref : P.W.D.(S&P.) p- 46 it no- 2/a ]

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, [Ref : P.W.D.(S&P.) p-12 it no -19(ii) ]

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.25 mm [Ref : P.W.D.(S&P.) p-12 it no -19]

CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent). [Ref : P.W.D.(S&P.) p-45 it no- 19 ( c) ]

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75mm X 75 mm X 75 mm wooden blocks complete.(i) 635 mm X 395 mm X 420 mm [Ref : P.W.D.(S&P.) p-80 it no-6(i)]

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. With 'S' trap [Ref : P.W.D.(S&P.) p-79 it no- 2(b)]

Supplying fitting and fixing Closet seat of approvedmake with lid and C.P. hinges rubber buffer and brassscrews complete.(b) E.W.C. (i) BESTOLITE SOLID TYPE [Ref : P.W.D.(S&P.) p-81 it no-10/iv]

Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings. White [Ref : P.W.D.(S&P.) p-36 it no-1]

Supplying fitting and fixing approved brand bevelled edge mirror 5.50 mm thick silver red as per I.S.3438/1965 with brass C .P..hinges. I) 600.mm x 450 mm [Ref : P.W.D.(S&P.) p-81 it no-15]

Supplying, fitting and fixing liquid soap container. (a) Cromium plated. [Ref : P.W.D.(S&P.) p-82 it no-17]

Supplying, fitting and fixing soap holder. (a) PTMT(Prayag or equivalent) [Ref : P.W.D.(S&P.) p-82 it no-18]

Supplying, fitting and fixing shower of approved brand and make. Chromium plated Hand shower with Flexible Tube & fittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar).). [Ref : P.W.D.(S&P.) p-4 it no-3(d) ]

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (a) Angle back wash basin 400 mm X 400 mm size [Ref : P.W.D.(S&P.) p-41 it no-2(iv)]

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (a) 600 mm long [Ref : P.W.D.(S&P.)p-43 it no -9(iii)]

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 1050 mm long [Ref : P.W.D.(S&P.) p-43 it no-10(iv)]

Supplying, fitting and fixing bib cock or Stop cock . a) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand) [Ref : P.W.D.(S&P.) p-6 it no-7(a)(ii)]

Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). [Ref : P.W.D.(S&P.) p-6 it no-7(b)(ii)]

Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass 25 mm dia. and 600 mm long [Ref : P.W.D.(S&P.) p-82 it no-22]

Dressed wood work in post , plate , battens . etc. fitted & fixed complete (excluding the cost of bolts only, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals) Sal : Local. [Ref : P.W.D.(Bldg.) p-135 it no -1/B/II ]

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor 6mm [Ref : P.W.D.(Bldg.) P-173 IT NO -2/II]

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor 19 mm [Ref : P.W.D.(Bldg.) P-173 IT NO -2/VI

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor Thickness of laminate 1.5mm [Ref : P.W.D.(Bldg.) P-179 IT NO -14/I]

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories,100 mm

Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5mm (± 0.2 mm) made out of single piece extruded PVC profile, with mitred cut joint sand joint with 2 nos. of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 mm x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The doorframe to be fixed to the wall using 8 x100mm long anchor fasteners complete, all as per manufacturer‟s specification and direction of Engineer -in- charge. [Ref : P.W.D.(Bldg.) P-116 IT NO -7 ]

Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. 35 mm thick shutters (single leaf) [Ref : P.W.D.(Bldg.) P -124 IT NO -11/A]

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. 12mm thick clear glass. [Ref : P.W.D.(Bldg.) P- 243 IT NO-9/XI]

Supplying, fitting fixing Godrej type hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-in-charge. [Ref : P.W.D.(Bldg.) P-147 IT NO - 37/B ]