ADDN/ALTN TO BUILDING No 217 FOR AGNIVEER VAYU WOMEN AT AF STN MEMAURA

Amount

Demolition of cement concrete of ground floors and Paving n.exc. 15 cm thick (below or above ground level) complete all as specified and directed .

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins arches pillars etc. complete all as specified and directed .

M&L for brick work with fly ash brick old size, straight or curved on plan exc 6 mtr mean radius and built in cement mortar 1:6 complete all as specified & directed.

All as per ser item No. 3 above but half brick wall built in cement mortar 1:4 complete all as specified and directed.

Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) exc. 1.50 Sqm & n.exc. 4 Sqm each complete all as specified and directed .

S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows ventilators and partitions (Fixed portions) with extruded built up standard tubular section of required size & approved make conforming to IS 733 and 15:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at i.e junctions, Le at top, bottom. and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight. mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engr-in-Charge..

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections of required size & approved make conforming to 15 733 and 15:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engr-in-Charge..

M&L for particle board, medium density, flat pressed, single layer type or three layer type, BWR grade board of 12mm thickness, exterior grade, laminated on both sides fied to aluminium framework with screws with all necessary accessories etc all as specified and directed.

Supply and fixing 5.5mm thgcik sheet glass ordianary quality, tineted exceeding 0.50 Sqm in each pane fixed to aluminium frame work with necessary glazing clips/rubber packing/gasket, screws etc complete all as specidied and as directed

S&F 100 mm long Aluminium powder coated tower bolt complete all as specified and directed

S&F 100 mm long Aluminium powder coated handle complete all as specified and directed

S&F 150 mm long ISI Mark aluminium anodized sliding door bolt, plate type, stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple all as specified and directed.

Supply & fix solid PVC door frame of size 50 x 47mm made out of 5mm thick prelam PVC sheet instead of plain colour PVC sheet reinforced with MS square tubes complete all as specified & directed.

S&F factory solid PVC Moulded door shutter with particle board core and 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face & 2mm thick prelam PVC sheet on the back face complete all as specified and directed.

S&F aluminium tower bolts 150mm long, of extraded section.

S&F aluminium handles 125mm long, cast type, anodised.

M&L for 17/ 18 mm medium density fibre(MDF) board exterior grade fixed to timber framework with screws both side prelaminated with one sidedecorative choice laminations and other side balancing white lamination fixed to timber frame work complete.

S&F of continous piano hinges mild steel bright finished width of flaps 30mm while open all as specified and directed.

S&F of 40mm dia cap board nobs fixed with nut screw & washer of mild steel bright finish all as specified and directed.

S&F of aluminium anodised barrel tower bolts of extruded section and fixed of 150mm long all as specified and directed.

S&F 150mm long aluminium handles cast type anodized, complete all as specified and directed.

S&F hasp and staple 125mm long aluminium anodised complete all as specified and dircted

Material & labour for preparation of new or old previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

S&F in repair 25mm Chromium plated with fixing brackets, stops, rollers coating curtain rod all as specified and directed by eng in charge.

Material & labour for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection/Path paving surface finished even and smooth without using extra cement complete all as specified and directed .

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and directed .

Material & labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair faces without using extra cement complete all as specified and directed.

M/L 15mm thick rendering in CM 1:4 with with water proofing compound on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.(Note- WPC Qty should be measured and paid to separately.)

Supply only water proofing compound complete all as specified and directed.

M&L for prepration of new plastered or unplastered surfaces of wall applying two coats of oil bound distemper complete all as specified and directed.

M&L complete removal of existing treatment of any description from old decorated surface of wall and applying two coats of oil bound distemper complete all as specified and directed.

M&L preparing of new plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

M&L complete removal of existing treatment of any description from old decorated surface of wall and applying two coats of cement base paint complete all as specified and directed.

Material & labour for preparing surfaces of ceiling and applying three coats of white wash complete all as specified and directed .

M&L for applying one coats of exterior emulsion paint white or tint on walls/ chajja/ facias/ fins on old surfaces including complete removal of existing treatment complete all as specified and directed

M&L for applying one coats of exterior emulsion paint white or tint on walls/ chajja/ facias/ fins on new pastered surfaces including complete removal of existing treatment complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed .

M&L for 300 x 600 x 7 mm thick joint free Glazed ceramic coloured tiles(premium quality) incl dark shade border/heighlighter in dado/skirting set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm plaster in cement mortar 1:4 complete all as specifed.

M&L Non skid ceramic coloured tiles 7-8 mm thick (Square/ rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm in floors set and jointed in neat cement slurry and pointed with white or cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specifed.

M&L Non skid ceramic coloured tiles joint free 7-8 mm thick (Square/ rectangular) area of each tile exceeding 0.18Sqm but not exceeding 0.38 sam in floors set and jointed in neat cement slurry and pointed with white or cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specifed.

Supply & fix kota stone slab 18-20 mm thick as in floor or stair trades(in one pieces ) and edges rounded etc over and including 22mm screed bed in cement mortar 1:6 & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing to achive mirror finish complete all as specified and directed .

M&L 75mm thick PCC 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in floors etc. finished even and smooth without using extra cement complete all as specified and as directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed .

All as per Sl Item No 45 here-in-before but 20 mm bore pipe.

Supply & laying CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls and ceiling or laid in floors for 20 mm bore complete all as specified and directed .

All as per item No. 47 above but 25 mm bore pipe.

Cutting Chases for concealed water tubing etc and making good disturbed surfaces, cutting not exceeding 10 cm girth, on brick walls complete all as specified & directed.

Supply & fix in repair gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed .

Supply & fix in repair long body bib taps brass cromium plated fancy type 20 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed

Supply & fix in repair brass chromium plated shower rose 100 mm size with shower arm square shpe 225mm long with flange complete all as specified and directed .

Supply & fix in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

Supply and fixed of PVC low level flushing cistern 10 Ltr capacity dual flushing white with inlet , ball valve, float and handle incl brackets incl 32 mm dia PVC flush pipe for low level cistern fixed as in repair complete all as specified and dircted.

Supply & fix in repair 20mm dia angle stop cock fancy type CP screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified and directed .

S&F 15 mm bore CP brass wall mixer with L bend provision for over head shower complete with brass legs & flange of approved makel as specified and directed.

S&F 20mm bore pillar taps brass chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe, fixed in repairs complete all as specified & directed.

S&F 127mm dia CP grating with hole complete all as specified and directed.

S&F 127mm dia CP grating without hole complete all as specified and directed.

S&F peg set of three for clothes hanging complete all as specifed and directed

Supply & fix mild steel framed work such as grills, grating, etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railing,cooler stands etc and similar work conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed ..

Hacking out old broken glasses (any thickness) size quality or description from wooden/steel frame all as specified and directed.

S&F for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.50 sqm in each pane complete all as specified & directed.

S&F of 3mm thick figured/pinhead glass ordinary quality and glazing with oil putty in square of any size all as specified and directed.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket ,power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators, sockets and defective main switch/DB/MCB/Metal plug etc. by unscrewing carefully from boards etc and making good disturbed surfaces of walls complete all as specfied and directed.

M&L for point wiring for light/fan controlled by one switch with 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including MS pressed steel sheet (1.0mm thick) sunk box with suitable module modular cover plate (white in colour) for switches and sockets, including 1.5 sqmm single core 1100 volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified and directed .

All as per srl item No 66 above but for 5 pin 5 amps socket outlet independent board complete all as specified and directed.

All as per srl item No 66 above but for one light point controlled by two Nos 2 way switches complete all as specified and directed.

M&L for point wiring with 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with in and including PVC concealed conduit medium grade with all fittings including pressed MS sheet (1.0mm thick) sunken box with 3mm laminated bakellite sheet cover ISI marked suitable for an independant 6 pin 15/16 amps socket outlet ,including 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to comman earth dolly including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area to match with the adjoining surface all as specified and directed.

S&F Modular switch 5/6 Amps, 230 V AC, single pole, one way complete all as specified and directed.

S&F modular switch 2- way, 5/6 amps flush type 230 volts complete all as specified and directed.

S&F socket outlet, multipurpose, modular 6 pin, 6 /15Amp with shutter complete all as specified and directed.

S&F socket out let multipurpose modular for 2 pin and 3 pin, 5 Amp flush type with shutter complete all as specified and directed.

S&F switch modular flush type 16/20 Amps, 230 V AC, single pole, one way complete all as specified and directed.

S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

Dismantling and taking down old serviceable LED tube light fitting of any type / capacity after necessary disconnection of electrical wires etc. and kept in safe custody and refixing the same after completion of B/R work at required places as specified and directed by Engr-in-Charge including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed.

Taking down carefully existing ceiling fan & dismantling blades from fan and deposit ceiling fan, fan rod & blade set in serviceable condition to MES store complete all as specified and directed.

S&F Wall/surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed.

S&F Wall / surface mounted type LED light fitting batten type complete with LED lamp 10- watt (2 feet long), poly carbonate body and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with twine core twisted flexible copper conductor cable complete all as specified and as directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting with LED lamp 10 watt, complete all as specified and as directed.

S&F 20 W powder coated PPC aluminium LED building light fitting having Ingress Protection class IP-65 , with high power LED complete with 32 mm bore light grade GI pipe bracket (1.5m long) duly bent to shape including 2 Nos M.S. Flat (25mmx5mm) clamps, nuts, bolts, washers etc. all as specified and as directed.

Supply and fixing air ventilating fan 250 mm sweep PVC body, AC, single phase, 230 volts, 1200 RPM complete with in-built louvers shutters and including PVC insulated 2 core 1.5 sqmm copper cable from ceiling rose to fan complete all as specified and directed.

Cutting into wall of any type, making holes for fixing of exhaust fan/ ventilating fan any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed.

Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 04 way, double door with 100 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

All as per Item No 84 above but SPN DB, 240 volts, 12 ways

All as per Item No 84 above but TPN DB, 415 volts, 4 ways

S&F MCB single pole 240 volts, 'B' curve of rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables complete all as specified & directed.

S&F MCB SPN 240 volts, 'C' curve of rating 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified & directed.

S&F MCB SPN 240 volts, 'C' curve of rating 40 to 63 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified & directed.

S&F MCB TPN 415 volts, 'C' curve of rating 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified & directed.

Supply and fix water cooler electric driven (single phase), having approx storage capacity of 40 litre and nominal cooling capacity of 40 Litres per hour complete all as specified & directed.

Supply and fixing Bed side LED table lamp, 3 watt, cool white, white colour, 240 volts, AC, 50 Hz complete all as specified and directed.

Supply and fixing Wall Fan high speed, 400mm sweep, 1350 rpm or above, air delivery 55 CMM, 220-240 volts, AC, 50 Hz complete all as specified and directed. Make: Havells D'zire model or equivalent in Bajaj/Crompton.

M&L for submain wiring with two single core 1100 v grade FRLSH PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated FRLS flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including a separate concealed PVC conduit medium grade, ISI mark of dia not less than 25mm including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with adjoining surfaces.

M&L for earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised iron wire of size 4 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 15 mm GI tubing medium grade and necessary fitting for protection of GI strip incl laying of charcoal dust and common salt in alternate layer, PCC Pit (1:3:6) type C-1 using 20 mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 8mm dia, plastering 15mm thick CM (1:6) externally upto 150mm below ground level , GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test point incl testing and marking Bldg Nos and writing Test Results on a 3.0mm thick painted M.S. earth pit marking Plate (200mm x 100mm) duly welded with a 450mm long 10mm dia round M.S. rod, fixed with the earth pit chamber by grouting complete including taking out old unserviceable earthing system including demolishing with old earth pit chambers and removing of debris from the site with levelling the ground all as specified an directed.

m/s pal associates (BID ID -3195257)

MS SHUBHAM SANTOSH JAIN (BID ID -3201032)

M/s RAAJSHREE INFRA (BID ID -3194582)