Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.4 LAccepted-AOC 117 GURU AMAR DASS NAGAR BHAISA SAUGOR MP | SAUGOR | SAGAR | MP | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹21.6 L+₹16,354 (0.76%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹22.0 L+₹56,187 (2.62%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹22.8 L+₹1.4 L (6.51%)Rejected-Finance NEAR MPEB OFFICE DHANA DISTT SAUGOR MP 470228 | DHANA | SAUGOR | MP | 470228 | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹23.4 L+₹2.0 L (9.24%)Rejected-Finance | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹57,000
EMD Value
₹57,000
Closing Date
21 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAUGOR
GE SAUGOR
Spl repair to Bldg No AET-28 (Main Office Complex) at 536 ASC BN under GE Saugor.
2023_MES_624937_1
GE/SGR/TOK-55 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
SAUGOR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER SAUGOR
₹57,000
Yes
19 Dec 2023
25 Oct 2023
23 Nov 2023
25 Oct 2023
21 Nov 2023
9 Nov 2023
26 Oct 2023 - 1 Nov 2023
Amount
Demolition of cement concrete un reinforced in ground floors and paving not exc 15cm thickness below or above ground level complete all as specified and directed
Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
M&L 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregates) surface finished even and smooth without using extra cement as in plinth protection incl necessary form work to edges and joints to be filled with bituminous sealing compound complete all as specified and directed
M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete etc complete all as specified and directed
Demolition of brick work or stone/boulder masonry, built in cement mortar mortor incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed
M&L for brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water complete all as specified and directed
M & L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed
M&L for rendering 10mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) and 5 mm thick in second coat mixed with water proofing compound @ 2% by wt of cement complete all as specified and directed. Note:- WPC shall be measured and paid separately
Supply only integral water proofing compound complete all as specified and directed
M & L for applying Birla/J.K wall care white putty 2mm thick for levelling the surface and two coats exterior weather coat ( Apex paint or equivalent) over one coat of exterior primer over newly plastered surfaces of walls complete all as specified and directed . Make:- Asian Apex or equivalent make as specified in Appx 'C' of Particular Specifications
M & L for complete removal of existing treatment mechanically and applying Birla/J.K wall care white putty 2mm thick for levelling the surface and two coats exterior weather coat ( Apex paint or equivalent) over one coat of exterior primer,including properly making of v shape crakes and filling of all crakes with crakes seal incl. preparation of surfaces of old decorated walls etc complete all as specified and directed Make:- Asian Apex or equivalent make as specified in Appx 'C' of Particular Specifications
M&L for applying two coats of acrylic Emulsion, white or tinted over a coat of wall primer over Birla / J. K. wall care white putty 2mm thick for levelling the surfaces on new wall surface including preparation of surface complete all as specified and directed
M & L for complete removal of existing treatment and applying Birla / J. K. wall care white putty 2mm thick for levelling the surfaces including properly making 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of acrylic Emulsion over a coat of wall primer incl. preparation of old surfaces of walls complete all as specified and directed
M&L for applying three coats of white wash on newly plastered surface including preparation of new surface complete all as specified and directed
M&L for 600mm x 600mm x 8mm to 10mm thick coloured vitrified tiles in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed
All as per Sr l item No. 17 above but in dado / skirting laid over and including 10mm thick rendering in CM(1:4).
M&L for non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles laid over and including 15mm thick screed bed or beding layer in cement mortar(1:6) complete all as specified and directed .
M&L for glazed ceramic tiles of size 600mm x 300mm x 7mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match the tiles laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed .
Dismantling Textile coverings including frames (if any) & cover fillets in ceilings (measured flat & not girthed) complete all as specified and directed
Taking down and refixing of false ceiling board size of 600mm x 600 mm including snap grid complete all as specified and directed.
S&F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24mm x 38mmx 0.60mm, Tee Section ( bottom pre coated ) and 24mm x 24mm x 0.5mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and incl dismantling and S & F coloured Non Asbestos designer ceiling cement boards 4 mm thick complete all as specified and directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed
Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but not exc 4 Sqm each complete all as specified and directed
S&F Factory made Solid PVC prelam Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet single side prelam PVC sheet wood grain printed used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube complete all as specified and directed
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet prelam on the front face & 4mm prelam PVC sheet on back face, supplying & fixing in frame centre core will be PVC battern complete all as specified and directed by engr-incharge
S&F glazed (5.0 mm thick plain / coloured glass) aluminum door powder coated consisting of frame of 63.50 mm x 38.10mm x 1.95 mm size with shutter fixed on frame both side open able on pivotal arrangement with including necessary cutting holes in wall & floor, Door shutter consists of top and bottom rail size is 83mm x 44.45mm x 2mm mm , & lock rail size is 100mm x 44.45mm x 2mm mm & style of door shutter is 85mmx 44.45mm x 2mm mm with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangemen,floor door stopper including necessary joining cleats , glazing clips and floor springs etc complete, confirming to IS complete all as specified and directed
S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34mm X 39mm side and top of size min 92.34mm X 29.70mm, shutters vertical 39mmX20mm,shutter top &bottom of size min 20mmX39mm ,shutter interlock min size 39mmX20mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }
S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.3 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }
S&F Aluminium, anodised, barrel tower bolts 150mm long extruded section complete all as specified and directed .
S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed
S&F 100mm Butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed
S&F Aluminium alloy, anodised, sliding door bolt 250mm long dia not less then 12 mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed
S&F Steel work in tubular trusses/purlins/posts (of round/rectangula/square hollow section)including angle cleats for jointing with welding complete all as specified and directed
S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 11 to 15 mm complete all as specified and directed
S&F Rolled mild steel Plates (plain or chequered) channels. Square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment GDE Fe410-0 or Fe 310-0 complete all as specified and directed
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed
M&L for 16mm to 18mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs etc complete all as specified and directed
M&L for rounding/ chamferring to edges of stone slabss one edge , such as in steps , cooking plateform and other similar situations complete all as specified and directed
S&F in repair 25 mm bore PVC coated MS conduit drapery rods, suitable for door/widows curtain with fancy type powder coated ms dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good the disturbed surfaces complete all as specified and directed
S&F in replacement GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed
Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.
S&F 0.50 mm thick galvalume sheet precoated coloured trapozoidal profile pattern fixed with self driving screws having tensile strength of 550 Mpa (AZ 150) as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old asbestos cement (corrugated,semicorrugated etc) sheets in roof covering complete all as specified and directed
S&F 0.45 mm thick galvalume sheet precoated coloured modular ridge suitable for profile pattern sheet having tensile strength of 550 Mpa fixed with self tapping screws including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof and taking down carefuly etc. complete all as specified and directed
S&F in replacement rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction ISI marked hoisted & fixed in position of 500 Ltrs Capacity complete all as specified and directed
S&F in repair PVC float valve assembly including assessories with float valve 20mm dia complete all as specified and directed.
S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed
S&F in repairs 110mm bore PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall or in trenches including mild steel clamps complete all as specified and directed
S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed
S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .
S&F in repair PVC(SWR) vent cowl of 110mm dia complete all as specified and directed
S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with adhesive joints laid in trenches or in floors complete all as specified and directed
S&F in repairs PVC (SWR) bends 75mm dia complete all as specified and directed
S & F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvent complete all as specified and directed
Demolition of RCC in precast cover slab any thicknes (reinforced) complete all as specified and directed
M&L precast reinforced cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed
S&F Mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed
S&F Mild steel TMT bars6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed
S&F in repairs health faucet ABS body with wall hook and 1 metre chrome plated PVC hose pipe ,cast copper alloy complete all as specified and directed. Make:-Cera Cat Part No F7020501 or equivalent make as specified in Appx 'C' of Particular Specifications
S&F in repair chromium plated bib taps, cast copper alloy fency conceled type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore complete all as specified and directed.
S&F in repairs 2 way bib cock with single knob 15mm dia chromium plated, cast copper alloy complete all as specified and directed Make:- Cera Cat Part No F3002163 or equivalent make as specified in Appx 'C' of Particular Specifications
S&F in repair angular stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.
S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F in repairs purposely moulded looking mirror 5 mm thick glass fixed with studs complete all as specified and directed.
S&F PVC connection on pipe 450 mm long with brass nut bolt complete all as specified and directed.
S&F in repair vitreous China wash down water closet pan (pedestal pattern)s trap and all fittings , white including white seat cover complete all as specified and directed.
S&F in repair vitreous China squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including P or S trap complete all as specified and directed.
S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend complete all as specified and directed.
S&F in repair vitreous China WHB white flat back size 550x400mm including S&F angle iron brackets and waste pipe complete all as specified and directed.
S&F Vitreous China full size pedestal for wash hand basin complete all as specified and directed
S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x420mm with bowl size 410mm x330mm x160mm complete all as specified and directed.
S&F framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framedwork or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed.
Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed
Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity complete all as specified and directed
M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLSH insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete incl cutting and chasing in stone/brick masonry complete all as specified and directed:-
One light, fan point controlled by one switch
One 5 Amp independent socket point controlled by one switch
One 3 pin ,5 Amp socket point with other switch on the same board
All as per Srl item No.76 here in before but for power point wiring using with 2.5 sqmm PVC-FR LSH insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed
S&F Modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed
S&F socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed
S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed
S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed
S&F ceiling rose, surface backlit,three terminal complete all as specified and directed
S&F Modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed
S&F modular fan step regulator 120W, 2 module complete all as specified and directed
S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed
All as per Srl item No.85 above SPN 63 Amps, 240 V
S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed.Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in the quoted rate .
S&F in replacement double door metallic sheet metal enclosure for MCB DB double door TPN 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in the quoted rate .
S&F in replacement of TPN 63 Amps 415 V including making electrical coming/outgoing connections with lugs/thimbles complete all as specified and directed
S&F double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 125 MCCB as incomer 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed
S&F MCCB 125 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs all as specified and directed.
S&F LED TL fitting 20/18 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed.
S&F LED bulb 10 watt suitable for angle / batten holder fitting complete all as specified and directed
S&F in replacement of Conventional recess mounted fitting to LED 2 X 2 ultra slip recess mounted luminaire with high brightness 36 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/grid ceiling complete all as specified and directed
S&F metal clad box enclosure with socket plug top and MCB SP 20 Amps flushed on wall mounting enclosure with 2 pin and earth plug socket complete all as specified and directed
M&L for provn of earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.
S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
M&L concealed sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit size not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed
M&L concealed sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC conduit size not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed
M&L concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 04 runs of 01 Single core of size 10 sqmm (for main current) drawn in & incl PVC conduit conduit less than 25mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 10 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed
S&F box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed
S&F ceiling fans complete with blades, down rods,with remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed
S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250MM complete all as specified and directed
Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 70 sqmm 3.5 core complete all as specified and directed
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of cable as the case may be and getting out hard / dense soil complete all as specified and directed
M&L for sand cushioning in trenches for the cable complete all as specified and directed
Returning filling, spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed
Removing excavated surplus material n. exc 50 mtr and depositing where directed at a level not exc 1.5 mtr from starting point complete all as specified and directed.
Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed
S&F in replacement of GI Pipe light grade 50mm bore ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed
maharaja construction and suppliers
m/s mohansingh
siddhant construction
v k builder
d k suppliar
M K Construction
SAGAR MOTOR AND TRACTOR CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .