Construction of Kalaiyarangam Building at Poongudi in Poongudi Panchayat.

Construction of Kalaiyarangam Building @ Poongudi in Poongudi Panchayat.

Earth work excavation and depositing on bank with initial lead and lift in hard stiff clay soil and hard gravel soil as per standard specification SS20 B for narrow foundation.

Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., complete.

Brick Work in Cement Mortor 1:5 mix using courntry bricks including cost and conveyance of all materials to site and all labour charges etc., complete

Centering for Sides and soffits including cost and conveyance and all labour charges etc., complete.BGL

Reinforced Cement Concrete 1:1.5:3 mix for RCC using 20mm ISS BG metal including cost and conveyance of all materials to site including all labour charges for filling etc complete.

Supplying and fabrication of steel including cost and conveyance and all labour charges etc., complete.

Plastering Inside with cement mortor 1:5 mix 12mm thick including cost of conveyance of all materials to work site and all labour charges etc., complete

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm including cost and conveyance of all materials to site and all labour charges etc complete

Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

White washing TWO coat using best freshly burnt white shell lime in all charges etc., complete with standard specification.

Colour washing two coats in all floors using best freshly burnt white shell lime and best quality of approved variety of colouring pigment including cost of lime, colouring pigments, fevicol type gum, brushes, scaffolding charges etc., complete complying with standard specification. Mineral colouring pigments not affected by lime should only be used (stainers and colour solutions should not be used.)

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting TWO coats of new iron works such as steel doors, windows etc, with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying with standard specification.

Supply and Delivery of Steel door 0.90m x 2.10 m

Supply and Delivery of Steel Window 0.90m x 1.2 m

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}