Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.0 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹50.1 L+₹80,468.17 (1.63%)Rejected-Finance SHATYAM APPARTMENT 35 BALAI DAS CHATTERJEE ROAD HAKIMPARA SILIGURI 1 | JALPAIGURI | WEST BENGAL | 734001 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹50.2 L+₹95,225.90 (1.93%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹50.3 L+₹1.0 L (2.06%)Rejected-Finance BIDHAN PALLY OODLABARI P O MANABARI P S MALBAZAR DIST JALPAIGURI | JALPAIGURI | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹51.9 L+₹2.7 L (5.38%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
17 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
PROVN OF REVENUE WORK AND SPL REPAIR TO MD ACCN PH 17 TO PH 20 AT SEVOKE MIL STN UNDER GE SEVOKE ROAD
2022_MES_533827_3
GE/SEV/11 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹84,000
Yes
22 Oct 2022
28 Sept 2022
19 Oct 2022
28 Sept 2022
17 Oct 2022
10 Oct 2022
29 Sept 2022 - 6 Oct 2022
Amount
Taking down cement plaster or lime plaster on walls /ceiling of any description from concrete or brick wall etc including raking out joints, hacking for key, scrubbing down with water and disposing off the retreived debris out side MD land including necessary scaffoldings etc complete all as specified and directed
M&L for rendering 15mm thick in cement mortar (1:6) on surfaces of walls including finishing the surfaces even and smooth (without using extra cement) etc, complete all as specified and directed.
M&L for 20 mm thick rendering on fair face of brick work in CM 1:4 in two layers of 10 mm thick each using water proofing compound in top layer only including finishing the surface even and fair(WPC shall be measured and paid seperately) complete all as specified and directed.
M&L for rendering 5mm thick in cement mortar (1:3) to ceiling and finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
M & L for preparation of new/old plastered surfaces of wall and applying 2-3mm thick wall care putty ,complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with roller over a coat of alkali resistant primer complete all as specified and directed. .
M&L for preparation of new plastered surafce wall and applying one coat of primeseal primer of M/s Dr fixit or equivalent chemical of M/s STP Ltd as approved by GE or one coat of chemistic PDE 600 elastomeric coating (and allowing to dry for 8 hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system raincoat of M/s Dr fixit with DFT 100 micrones or shalicry 215 of M/s STP Ltd of chemistic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8 hours before application of next coat) including necessary scaffolding etc complete all as per manufactures instructions and as directed. Note : The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufactures and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE.
M & L for preparation of new plastered surfaces of ceiling and applying three coat of white wash, complete all as specified and directed.
M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper with roller over one coat of primer complete as specified and directed.
M&L for complete removal of existing treatment of wall and applying two coats antifungal exterior paint (of shade/colour as directed by GE) over one coat of primer all as per manufacture instruction including necessary scaffoldings etc complete as specified and directed.
Dismantling floor hearth or wall tiling and stone slabs including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed
Demolition of cement concrete (reinforced) chimney, kitchen platform etc of any description and if any position not otherwise specifically provided complete all as specified and as directed.
M&L for RCC 1:2:4 type BI (using 20 mm graded crushed stone aggregate) nominal mix as in fins, facias,chajja,lintel etc complete all as specified and as directed.
M&L 20mm thick granite slabs of any type (table rubbed and polished) on cooking platforms set and jointed in net cement slurry and pointed in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including necessary moulding at edges laid over and including 20mm thick cement mortor screed bed in cement mortor (1:6) complete all as specified and directed.
M&L 20mm thick granite slabs of any type in skirting/dado laid over cemenet screed and jointed in net cement slurry and pointed in white cement with admixture of pigment to match shade of granite stone including grinding and polishing including necessary moulding at edges laid over and including 10mm thick cement mortor screed bed in cement mortor (1:3) complete all as specified and directed.
M&L for coloured Non-skid ceramic tiles area of each tiles exc 0.11 sqm and n exc 0.18 sqm and 7 to 8mm thick (square/ rectangular) of approved size in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
M&L for coloured 300x450x7 mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar backing coat in CM 1:4 etc, complete all as specified and directed.
M&L for virified coloured (light shade) Non-skid ceramic tiles 10mm thick (square/ rectangular) of polished size, area of each tile exceeding not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 20mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
M&L for virified coloured (light shade) Non-skid ceramic tiles 10mm thick (square/ rectangular) of polished size, area of each tile exceeding not exceeding 0.36 Sqm in dado/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar screed bed in CM 1:4 etc, complete all as specified and directed.
Taking down chowkats or frames, exc 1.5 sqm but not exc 4 Sqm each with shutters (Without taking off shutters from the frame) and refixing of old shutter in new chowkats complete all as specified and directed.
Taking down chowkats or frames, n.exc 1.5 sqm with shutters (Without taking off shutters from the frame)complete all as specified and directed.
S & F 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hings lock strike plate etc complete all as specified.
S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing complete all as specified and directed.
S & F factory made 35mm thick plain, framed panelled shutter (two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm veneered particle board with commerical veneering in both faces. The size of rails and stiles shall be as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated of 2nd class hard wood (Hollock/Sal/Kalasiris), complete all as specified and directed.
S&F factory made 35mm thick 2nd class hard wood (Hollock/Sal/Kalasiris), Kiln seasoned and chemically pressure treated, glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges, of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specfied in SSR Part I, Section 8, cluase 8.24 (a) ; supplied and fitted to chowkats complete all as specfied and directed.
Suppy and fixing in replacement 18/19 mm thick pre-laminated particle board exterior grade pre-laminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in cup board shutters, partitions and shelves complete as specified and directed.
Suppy and fixing in replacement 18/19mm thick block boards grade 1 quality exterior grade commercial type fixed with screws to timber frame work as in cup board shutters, kitchen cabinets, shelves etc complete as specified and directed.
M&L for kota stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing fixed as in stair, window cill, shelve etc including 10mm thick screed bed or beding layer of cement motor 1:4 for fixing for stone complete all as specified and directed.
S&F Anodised aluminum section powder coated in partition / frame for door, shutters, sliding windows / ventilators and places otherwise not specified cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass or wire cloth or Bakelite sheet and all necessary fittings, hinges, screws, plugs, locking arrangements for windows, Nylon ball bearing etc completed all as specified and directed (Aluminum section shall be of make Jindal / Hindalco / Indalco). Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet / wire cloth / mortice lock / locking stay / floor spring / floor door stopper only will be measured and paid separately under respective items as supply only. Fixing element of these items shall be deemed to be included in quoted rate.
Supply only stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tined tacks, or galvanised wire stapless complete all as specified and as directed.
S&F mild steel Framed work such as grills, gratings etc, with ends of bars shouldered or rebated or forged into spikes, framed guard bars, barred iron doors, railings, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and directed.
Supply only 4mm thick sheet glass ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.
Supply only 5.5mm thick figured glass pin head type and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.
S&F stainless steel butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.
S&F aluminium anodised bow handles of 150mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, 150mm long, complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, 125mm long, complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy complete all as specified and directed.
M& L for Hasp and staple, safety type, aluminium anodised 100 mm including bolt to hinge plate and fixed with screws complete as specified and directed.
S & F continuous (Piano) hinges mild steel bright finish or electro galvanised width of flaps when open 30mm complete as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
Demolition of cement concrete in ground floors (un-reinforced) and paving not exc. 15cm thickness (below or above ground level) complete all as specified and directed.
M&L for PCC 75 mm thick (1:3:6) type C-2 (40 mm graded crushed stone aggregate) as in plinth protection finished even and smooth using extra cement complete all as specified and as directed.
Demolition of brickwork built in cement mortar including taking out roots vegetation if any at any position and removal to out side MD land, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 meter mean radius built in CM 1:4 complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks in half bricks walls straight or curved on plan to any radius built in CM 1:6 complete all as specified and as directed.
M&L 100mm thick cement concrete 1:2:4 (type B-2) (using 40mm graded crushed stone aggregate) as in PCC floor complete all as specified and directed.
M&L for chequered cement concrete tiles 30cm x 30 cm x 25 mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry in floor with grey cement mixed with pigments to match with the colour of tiles, laid over and including 20 mm thick screed bed in CM 1:4, complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise sepcifically provided for complete all as specified and directed.
M&L for cement conrete 1:3:6 (type C-2) (using 40mm graded crushed stone aggregate) as in surface channels and drain complete all as specified and directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc.
Taking up or down 15 mm bore steel water tubing and connections including cleaning for re-fixing or removal to store complete all as specified.
Taking up or down 20 mm bore steel water tubing and connections including cleaning for re-fixing or removal to store complete all as specified.
Taking up or down 25 mm bore steel water tubing and connections including cleaning for re-fixing or removal to store complete all as specified.
Cutting chases in brickwalls girth exc 10 cm but n exc 20 cm , pinning in making good to facings where required and pointing in cement mortar 1:3 for conceal water tubing etc and making good complete all as specified.
S&F 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S&F 25 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) Vent cowl complete all as specified & directed
S&F in repairs wash hand basin, vitreous china white of size 550x 400mm excluding taps, but including brackets, 32mm dia waste fitting brass chromium plated and PVC waste pipe 32mm bore complete all as specified and directed.
S& F in repair 15 mm bore stop cock/angle cock cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S& F in repair 15 mm bore bib tap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S&F in repairs 15mm bore CP fancy type Health faucet with 1.5 meter long tube with CP wall bracket complete all as specified and as directed.
S & F in repairs flushing cistern, 10 Ltrs. Capacity, PVC valveless, syphonic action type with dual flushing system, low level,white with inlet, ball valve,float and handle including brackets and flush pipe of polyethylene PVC 32mm dia, complete all as specified and directed.
S&F PVC connection pipe 15 mm dia, 450 mm long with PTMT nut complete all as specified and as directed
S&F in repairs brass chromium plated, shower rose, 125mm size, complete all as specified and directed.
S&F towel rail 600mm long of PTMT (min weight 190 grams) fixed with and incl chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed.
S&F 32mm bore high density polyethylene pipes (LDPE) of pressure rating 6 Kgf / cm2, fixed to walls, ceiling or laid in floors etc, complete all as specified and directed.
S&F in repair sinks without drain board, gloss finish, made of stainless steel 1 mm thick for kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe also including 40mm bore PVC waste pipe overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F CP curtain rails 20 mm dia chromium plated, with and including fixing brackets, stops, rollers etc, complete al as specified and directed.
S&F in repair vitreous china squatting pan "ORISSA" pattern of size 580x440mm white with and including 'P' or 'S', with integral foot rests (excluding flushing cistern & flush pipe) including provision of lime concrete bedding and connecting up, complete all as specified and directed.
S&F PVC cabinet with mirror Cat No. 551 of make prayag or equivalent as approved by GE complete all as specified and as directed.
S&F kitchen plate rack made out of stainless steel 1mm thick sheet with partition and size of rack 800X250X900 mm complete all as specified and directed.
M&L for Reinforced cement concrete typeB0 1:2:4, (12.5mm graded crushed stone aggregate) as in chajja, kitchen platform, kitchen shelves complete all as specified and as directed.
M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges Complete all as specified and as directed.
M& L for Mild steel TMT bars 08 mm dia. and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
All as above but for stirrups complete all as specified and as directed.
S&F in repair 25 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
Dismantling PVC water tank of capacity 1000 Litre and removing from site complete all as specified and directed
S&F Rotational moulded polyethylene water storage tanks 1000 Litre capacity ISI marked multi layers construction (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F Ball brass valves of size 25 mm bore high pressure, the polythene float and fly nut, screwed for iron pipe or brass ferrule etc, complete all as specified and directed.
Demolition of cement concrete (un-reinforced) or tiles from existing roof/ terrace and also removing/ taking down of existing water proofing treatment of any thickness in any position and removing rubbish off the premises complete all as specified and as directed.
M&L for rendering 10mm thick in cement mortar 1:4 on roof surface mixed with water proofing compound @3% by weight of cement , finished even and smooth without using extra cement complete all as specified and as directed. Note- WPC shall be measured and paid separtely
M&L for providing, laying water proofing treatment over plastered surfaces of RCC roof shall be as under:- (a) The dried plastered surface of slab shall be painted with one coat of bituminous primer @0.4 liter/Sqm. (b) Over the primed surface a layer of APP based polymeric membrane minimum weight of 3.5 kg/sqm of approved manufacturer minimum 4mm thick, reinforced with polyster non woven fabric (weighing not less than 160gms/sqm) shall be laid by torch application method. The side over laps of membrane shall be minimum75mm and the end laps shall be minimum 100mm and sealing all overlaps and joints shall be done as per manufacturer's instruction. (c) The finished surface shall be given Aluminium paint @ 0.11 Kg/Sqm on APP as per manufacturer's instructions. Make:-M/S TEXSA INDIA LTD (MOPLY-FP) / M/S STP LIMITED (SUPER THERMOLAY) / IWL INDIA LIMITED (HYPERPLAS)/M/S Tiki Tar Danosa (India) Pvt Ltd (Hydro Stop)/M/s Supreme Bituchem India Pvt Ltd (Super Shield)
S&F PVC (SWR) floor trap dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.
M&L for preparation new steel surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Re-writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm height with synthetic enamel paint complete as specified and directed.
S&F 19 mm thick plywood grade BWR as in cabinet all as specified and as directed . Make of plywood : Green ply industries Ltd / Century / Archid
M&L 1.5 mm thick PVC laminates and fixed with approved Adhesive as per manufacturer instructions. Make:- Green ply industries Ltd/ Century/ Archid.
M&L 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer instructions. Make:- Green ply industries Ltd/ Century/ Archid.
M&L for injecting chemical GLYPHOSPHATE (4% concentration) of 20 ml or till refusal by making cut/injection in the stem of plant of roots at 30mm and spraying with solution 25 ml GLYPHOSPHATE (4% concentration diluted with 1 ltr of water) and removing the plant /vegetation complete all as specified and as directed.
M&L for providing Polymer Bonding Agent of Fosroc (NITOBOND-SBR) OR equivalent brand of Dr. Fixit,as approved by the GE followed by flexible polymer based putty ( 1cement: 1.2 finesand :20% polymer by weight of cement : water as required ) on cracks after cutting the cracks to a 'V' shaped groove upto 10 mm wide and 10 mm deep in structural RCC members, lintel,chajja finished with spatula etc. complete all as specified and directed.
M&L for casting & repairing of excessively damaged distressed RCC members (exceeding 40mm in thickness) with prebatched, prepacked,single component ready to use microconcrete from FOSROC (Renderoc RG) or equivalent or Dr fixit as appoved by GE, at any level/height and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing, laying, levelling, finishing, curing etc as per manufacturers specifications and all other relevant works, complete all as specified and directed. Note : Reinforcement only shall be measured and paid separately)
M&L for providing 75mm thick PCC (1:4:8) type D2 as in subbase flooring (using 20mm graded crushed stone aggregate) complete all as specified and directed.
M&L for coloured 450x300x7 mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar backing coat in CM 1:4 etc, complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm screed bed with CM (1.6) complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified.
M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise sepcifically provided for complete all as specified and directed.
S & F 105 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hings lock strike plate etc complete all as specified.
Disconnecting existing tanks, setting aside cleaning and removing all scale and dirt etc from tank and mouth of circulating pipe and refixing in position of capacity of water tank exc 500 ltr but not exc 1000 ltrs complete all as specified and as directed.
S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or incliding fixing cantilever brackets and connecting union to pipe overall size 495mm x 402mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
S&F 20mm steel tubing medium grade, with all fittings and fixed to walls, ceilings or laid in floors etc complete all as specified and as directed.
S&F 15mm steel tubing medium grade, with all fittings and fixed to walls, ceilings or laid in floors etc complete all as specified and as directed.
S&F Rotational moulded polyethylene water storage tanks 500 Litre capacity ISI marked multy layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F Ball brass valves of size 20 mm bore high pressure, the polythene float and fly nut, screwed for iron pipe or brass ferrule etc, complete all as specified and directed.
S&F 20 mm gun metal globe or gate valve with iron wheel head, screwwed both ends for iron pipe and fixed complete all as specified and directed.
M&L for coloured 295 to 305 mm x (195 to 205) mm x6 to 7 mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar backing coat in CM 1:3 etc, complete all as specified and directed.
Taking down carefully old unserviceable copper/aluminium point wiring (light,Exchaust fan, socket or power) complete incl fittings such as switches,ceiling roses, pendents, regulators,bells,sockets,tube light fittings etc, and making good disturbed surface of walls & floors etc complete all as specified and as directed.
Taking down old unserviceable Main Switch, DB's consisting of MCBs wooden/GI/MS sheet board etc for kept in store and for later use all as directed.
Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces all as directed.
M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
All as per Item Sl No - 116 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.
All as per Item Sl No - 116 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.50 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.
All as per Item Sl No - 116 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete.
All as per item No 116 here in before but for light point controlled by 2 way switch with 1.5sqmm FRLS wires all as directed
M & L for Switch Socket combination 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.
M & L for Socket outlet 3 Pin, 5 Amp flush type universal, 240 volts, complete all as specified all as directed.
M & L for Switch Socket Combination 5 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 volts, complete all as specified and as directed.
S&F piano switch single pole 5 Amp 230 Volt all as specified and as directed.
S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.
S & F Bell Push Flush type 5 Amp, 240 volt all as specified.
S & F Bell Ding-Dong AC 230 V Single Pole complete all as specified and as directed.
S&F switch piano, surface type single pole 2 way, 5 Amp 230 Volt all as specified and as directed.
Taking down existing u/s FTL light fitting and S&F in repair decorative box type LED fitting 20 watt with Al extruded batten luminaire for 230 volt AC all as directed by EIC.
M&L LED street light of capacity 30 watt in Aluminium PDC housing, with IP66 protection complete all accessories with frame and connecting PVC copper wire not exc 5 mtr all directed.
Taking down existing u/s FTL light fitting and S&F in repair decorative box type LED fitting 10 watt with Al extrudedbatten luminaire for 230 volt AC,including LED tube 10 Watt complete all as directed by EIC.
Taking down ceiling fans/exhaust fan of any size,dismantling blades and removing fan and blades to MES store complete all as specified and directed.
S&F energy efficient ceiling fan 5 star (BLDC 26W) 230V, 1200 mm sweep with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size with ceiling fan complete all as specified and as directed.
S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete all as specified and directed.
Supply & Fixing DB with sheet metal enclouser 240 volts, 12 way, SPN double door for MCB, including cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.
Supply & Fixing MCB double pole (DP) 240 volts of capacity 32 Amp ,C curve, complete all as specifie and as directed.
S&F MCB, SP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete all as directed.
Supply & Fixing TP&N DB 4 way with sheet metal enclouser 415 volts, double door for MCB including cutting chases for DB of required size and making good distrubed surface area complete all as specified and as directed.
S&F MCB TPN 63Amp four pole 415 volt breaking capacity 16KA adjustable thermal and adjustable magnatic complete all as directed.
Material and labour for concealed sub main wiring with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead including common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.
Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft/loose type soil getting out and levelling of bottom surface to required level complete all as specified and directed.
Returning,filling in,including spreading,levelling,watering and well ramming in layers not exceeding 25 cm thick all as specified and as directed.
Removing excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and as directed.
Supply and laying in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16sq mm 4 core including making necessery connections all as specified and as directed.
Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.
Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.
Supply and fixing GI pipe 40mm bore, medium grade for cable protection complete all as specified and as directed.
M/S SUBRATA JOARDAR
SHRI JAYANTA GHOSH
RAJIV DEY SARKER
D.D. BROTHERS
TAPASH SAHA
M/S TARAN INFRACON
Raj Enterprise
LIBERAL ENGINEER CONSTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .