GE/ALP (8923)/KOL OF 2020-21

Amount

Taking down ceiling fan of any type, any make and any sweep for repairing,opening the body and blade, checking for repalcement of unserviceable spares,cleaning, overhauling, greasing, replacement of unserviceable spare by new one, re-assembling of all components in original position, testing and hanging up the same as directed complete all as specified and as directed. Note : New spare parts required for replacement shall be measured and paid seperately as 'Supply only" under respective item of BOQ.

Rewinding of ceiling fan, 1200 mm sweep with superenamelled copper wire including insulation with polyster paper/manilex paper with cotton binding, heat varnished and including flexbile cable of suitable size and length for electric connection all as directed. complete all as specified and as directed.

Supply only ball bearing of size 6201/6202/6203 complete all as specified and as directed.

Supply only metal bush bearing suitble for ceiling fan 1200/1400 mm sweep of any type and size complete all as specefied and as directed.

Supply only, capacitor for ceiling fan 2.50 MFD complete all as specified and as directed.

Supply only, capacitor for ceiling fan 2 MFD complete all as specified and as directed.

Supply only fan blade (3 Nos blade in one set) 1200 mm sweep suitable for USHA/Havells/Bajaj or equivelent make fan and complete all as specified and as directed..

Supply and fixing in repair of MS clamps made out of 50 x 6mm flat iron suitable for hanging of ceiling fan on pipe including necessary cutting, threading, drilling, fixing arrangement split pin, nuts, bolts washer etc as directed. complete all as specified and as directed.

Material and labour for in replacement of fan hooks, of suitable size with M.S. flat iron 50x6mm suitable for hanging of ceiling fan fixed to concrete slab or any other place including making good disturbed surfaces. complete all as specified and as directed.

Material and labour for in replacement of GI tubing 15 mm 'light grad',galvanised, with all fitting; suitable for hanging of ceiling fan as required. complete all as specified and as directed.

Material and labour for painting of ceiling fan complete, in situ of size 1200 mm sweep with two coats of synthetic enamel white paint by spray painting gun including preparation of old painted surfaces including writing of MES No with letters n exc 15mm height complete all as specified and as directed. by Engineer-in-Charge

Taking down exhaust fan/wall mounted of any type, any make, by opening of body carefully checking for repalcement of unserviceable spares, including replacement of spares by new one, re-assembling of all components in original position, cleaning, oiling greasing, testing and fixed in original position Note : New spare parts required for replacement shall be measured and paid seperately as 'Supply only" under respective item of BOQ.

Supply and Fixing in repair louvers, suitable for upto 225 to 300 mm sweep exhaust fan made of GI sheet 1mm thick complete all as specified and as directed.

Rewinding of exhaust fan,upto 225 to 300 mm sweep with super enamelled copper wire and insulation with polyster paper/manllex paper with cotontak binding, heat varnished. complete all as specified and as directed.

All as per item No 14 here-in-before but for wall mounting fan 300mm sweep complete all as specified and as directed by the Engr-in-Charge.

Supply only, capacitor for exhaust fan 4.00 MFD complete all as specified and as directed.

Material and labour for preparation of exhaust fan/wall mounting fan and applying one coat of grey synthetic enamel paint by spraying using spray gun with filling cavities and preparation of surfaces including writing of MES No, taking down and refixing complete all as specified and as directed.

Material and labour for point wiring for one light/fan/call bell point with single core 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including single core 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including caping casing with all accessories suitable for modular fittings including taking down of old existing point wiring including fittings and making good the distrubed surfaces as per the existing complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.Taking down of unserviceable point wiring,switch/switch-socket included in quated rate.

All as per item No.18 here-in-before but for 3 pin 6 Amps socket outlet on the same board with 1.5 sqmm cable complete as specified and directed.

All as per item No.18 here-in-before but for 3 pin 6 Amps switch socket combination on the independent board with 1.5 sqmm single core PVC unsheathed copper cable complete as specified and directed.

All as per item No.18 here-in-before but for switch socket combination 2 in 1,3 pin 5/15 Amp on independent board with 2.5 Sqmm single core PVC unsheathed copper cable and 1.5 sqmm copper conductor cable as earth continuity conductor complete as directed.

Supply and Fixing Modular socket outlet 2 in 1, 5 pin 5 Amp,230 Volts.

Material and labour for Modular switch socket combination 2 in 1, 5 pin 5 Amps, 240 V, all as specified.

Supply and fixing Modular switch socket combination 2 in 1,15 Amps, 230 Volts, complete all as specified and as directed by the Engr-in-Charge.

Supply and Fixing of modular white cover plate with frame 3 Module complete all as specified and as directed.

Supply and Fixing modular metal flush box 3 Module complete all as specified and as directed.

Supply and Fixing of modular white cover plate with frame 4 Module complete all as specified and as directed.

Supply and Fixing of modular metal flush box 4 Module complete all as specified and as directed.

Supply and Fixing of modular white cover plate with frame 6 Module complete all as specified and as directed.

Supply and Fixing of modular metal flush box 6 Module complete all as specified and as directed.

Supply and Fixing of modular switch 6A,230V complete all as specified and as directed by Engineer-in-Charge

Supply and fixing as in repair of sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one 20 Amps SP MCB 240 Volt complete all as specified and as directed.

Supply and fixing in repair of ceiling rose surface bakelite three terminal 65 x 50mm, PVC/Polycarbonate,isolated body complete all as specified and as directed by the Engr-in-Charge. .

Supply and Fixing as in repair bell Buzzer/Ding Dong AC. 230 volts,single pole complete all as specified and as directed.

Supply and Fixing as in repair bell push, flush type, 5 Amp AC. 230 voltssingle pole complete all as specified and as directed.

Supply and fixing in repair MCB, single pole, 240 Volts, of capacity (6-32 Amps) 'C' series as ordered breaking capacity 10 KA.

Supply and fixing in repair MCB SPN, 40 to 63 Amps, 240 Volts ,'C' series of breaking capacity 10KA complete all as directed.

Supply and fixing in repair MCB TPN, 40 to 63 Amps, 415 Volts ,'C' series breaking capacity 10KA complete all as specified and as directed.

Supply and fixing as in repair MCB DB SPN (double door) 12 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing as in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing as in repair MCB DB SPN (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed. by the Engr-in-Charge.

Supply and fixing as in repair MCB DB SPN (double door) 2 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed. by the Engr-in-Charge.

Supply and fixing as in repair vertical TPN MCB DB (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed suitable for MCB TPNas incomer and MCB as outgoing with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed. by the Engr-in-Charge.

Supply and Fixing in repair MCCBs 4 pole 63A, Breaking capicity 18 KA adjustable type complete with cable connection with copper lugs complete all as specified and as directed.

Supply and Fixing in repair MCCBs 4 pole 100A, Breaking capicity 18 KA adjustable type complete with cable connection with copper lugs complete all as specified and as directed.

Supply and Fixing in repair MCCBs 4 pole 125A, Breaking capicity 25 KA adjustable type complete with cable connection with copper lugs complete all as specified and as directed .

Supply and fixing in repair LED integrated batten T5 fittings with decorative end cap complete with retrofit T5 polycarbonate/glass tube , 5W tube light complete with all accessories Make: C&S Cat No-LTTB1F5WLED/W or equivalent as listed complete all as specified and as directed.

Supply and fixing in repair LED integrated batten fittings with decorative end cap complete with polycarbonate/glass tube, 9 W tube light complete with all accessories Make:HAVELLS Cat Np.LUMILINEBS9WLED865SPCWH or equivalent as listed complete all as specified and as directed.

Supply and fixing in repair LED integrated batten fittings with decorative end cap complete with polycarbonate/glass tube, 20 w tube light complete with all accessories complete all as specified and as directed. Make:Crompton Cat Np.LCTLN-20-CDL or equivalent as listed

Supply and fixing in repair of LED 10W , integrated square recessed mounted complete fittings complete with all accessories complete all as specified and as directed. Make:Philips Cat No.DN097BLED10S-4000PSU WH or equivalent as listed

Supply and fixing in repair of LED 12W integrated circular recessed mounted complete fitting complete with all accessories complete all as specified and as directed. Make:Philips Cat No.DN097BLED10S-6500PSU WH or equivalent as listed

Supply and Fixing in repair of LED high quality driver constant current ,Realiability quality& amp ,suitable for 8-15W LED existing fittings.complete with all accessories all as specified and as directed by Engineer-in-charge Make Philips/Bajaj/Havells/Century

Supply and Fixing in repair of Ballast suitable for 18W , 2/4 pin PLS for existing fitting complete with all accessories all as specified and as directed by Engineer-in-charge Make Philips/Bajaj/Havells

Supply and Fixing in repair of 2/4 pin holder suitable for existing fitting complete with all accessories all as specified and as directed by Engineer-in-charge

Supply and Fixing in repair of ballast suitable for 18W ,2/4 pin lamp fitting complete with all accessories all as specified and as directed by Engineer-in-charge Make Philips/Bajaj/Havells

Supply and Fixing in repair of LED 24 W,, square fitting ultra slim decorative aluminiumcasted,recessed mounted square fixture in white finish with opal diffuser with all necessary connecting accessories including tube light complete all as specified and as directed by Engineer-in-charge Make Havells Cat No.LHEBHEP5IZ1W024 or equivalent as listed

Supply and Fixing in repair of LED 20 W,, square fitting ultra slim decorative aluminiumcastedceiling light fitting,surface mounted square fixture in white finish with opal diffuser with all necessary connecting accessories including tube light complete all as specified and as directed by Engineer-in-charge Make Crompton Cat No. LSRP-20-CDL or equivalent as listed

Supply and Fixing in repair of LED 28 W, fittings uldecorative aluminiumcastedceiling light fitting,surface mounted square fixture in white finish with opal diffuser with all necessary connecting accessories including tube light complete all as specified and as directed. Make C & S Cat No. LTCRSLM28WATT 1X2 or equivalent as listed

Supply and Fixing in repairfor Modular switch socket combination 2 in 1, 5 pin 5 Amps, 240 V, complete all as specified and as directed.

Supply and fixing in repair Modular switch socket combination 2 in 1,15 Amps, 230 Volts, complete all as specified and as directed by the Engr-in-Charge.

Supply and Fixing In repair modular metal flush box 1 Module complete all as specified and as directed.

Supply and Fixing In repair modular metal flush box 2 Module complete all as specified and as directed.

Supply and Fixing In repair modular metal flush box 3 Module complete all as specified and as directed.

Supply and Fixing In repair modular metal flush box 4 Module complete all as specified and as directed.

Supply and Fixing In repair modular metal flush box 6 Module complete all as specified and as directed.

Supply and Fixing In repair modular white cover plate with frame 1 Module complete all as specified and as directed.

Supply and Fixing In repair modular white cover plate with frame 2 Module complete all as specified and as directed.

Supply and Fixing In repair modular white cover plate with frame 3 Module complete all as specified and as directed.

Supply and Fixing In repair modular white cover plate with frame 4 Module complete all as specified and as directed.

Supply and Fixing In repair modular white cover plate with frame 6 Module complete all as specified and as directed.

Supply and fixing of modular stepped type electronic fan regulator 230 volt complete all as specified and as directed.

Supply and Fixing of modular switch 6A,230V complete all as specified and as directed by Engineer-in-Charge

Supply and fixing in repair of sub-main wiring (surface type) for main with PVC (FR-LSH) insulated & unsheathed two runs of 4 sqmm single core multi stranded copper conductor cable, 1100 Volt grade alongwith one run of 4 sqmm PVC (FRLS) insulated & unsheathed copper conductor cable, 1100 Volt grade, with PVC casing & capping connected to common earth dolly as earth continuity conductor, drawn through PVC casing & capping carefully and taken down old existing aluminium sub main wiring with accessories complete all as specified and as directed.by the Engr-in-Charge. Note : Two runs of 4 sqmm and one run of 4 sqmm cable and casing and capping shall constitute one unit.

Supply and fixing in repair of sub-main wiring (surface type) for main with PVC (FRLS) insulated & unsheathed two runs of 2.5 sq mm single core multi stranded copper conductor cable, 1100 Volt grade alongwith one run of 2.5 sqmm PVC (FRLS) insulated & unsheathed copper conductor cable, 1100 Volt grade, with PVC casing & capping connected to common earth dolly as earth continuity conductor, drawn through PVC casing & capping carefully and taken down old existing aluminium sub main wiring complete all as directed by the Engr-in-Charge. Note : Two runs of 2.5 sqmm and one run of 2.5 sqmm cable and casing and capping shall constitute one unit.

Disconnecting defective sealed receprocating type compressor unit of 1.5 TR Split/ Window/ Package type AC from the system and fixing repaired/ reconditioned sealed unit compressor in original position complete all as specified and as directed.

Material and labour for taking out and dismantling the existing rusted unserviceable condenser coils from the existing system of 1.5/ 2.0 TR capacity of Window type / split type AC unit located at different place of Comd Hosp after decanning refrigerent gas from the system to empty cylinder, disconnecting all electrical connection, flair nuts, valves and shut down all preventive valves properly, supply and replacing with new condenser coils as per existing size and specification including necessary fixing arrangement and connect all electrical and safety protection devices to the existing system and flushing the whole system by nitrogen, leak testing by 200 PSI nitrogen pressure holding of 48 hours, charging of decanning refrigerent to the system and charging of additional refrigerent as required, commisioning and testing complete all as specified and as directed by the Engr-in-Charge.

Taking down geyser and scraping, cleaning including brazing of inner vessel of the geyser at leakage point to made it leak proof including testing pressure and assembling of all component including replacement of spares as required and refixing complete for 25 Ltr capacity. complete all as specified and as directed. Note : Minor new spare parts required for replacement shall be included in unit rate.

Supply and Fixing in repair heating elements of 2 KW 230 V suitable for water heater of any type including connection with suitable cable complete all as specified and as directed.

Supply and Fixing in repair thermostat switch of geyser 230 V, 30 degree to 90 degree centigrade temp range to be set at 70 degree to 50 degree centi grade suitable for water heater. complete all as specified and as directed.

Supply and Fixing in repair indicating lamp, 230 V, flush type, rectangular, red and green indicator suitable for water heaters. complete all as specified and as directed.

Supply and Fixing in repair PVC inlet connector pipe 450mm long for geyser, heavy duty,with brass coupling both ends sutiable to fix inlet of geyser. complete all as specified and as directed.

Supply and Fixing in repair 450mm long brass CP connection with 2 nuts without nipple suitable for geysers. complete all as specified and as directed.

Material and labour for preparation to old painted surface of storage water heater and painting of geyser 25 ltr capacity with two coats of synthetic enamel paint (white) by using spray gun all as directed. complete all as specified and as directed.

Supply and fixing as in repair for Split cover made out of 22 guage sheet duly painted with synthetic enamel paint suitable for water heater of 25 ltr capacity. complete all as specified and as directed.

Supply and fixing as in replacement of patented nano polymer coated steel inner tank of 25Ltr capacity geyser suitable for model of make: Cromption/Usha/Bajaj complete all testing and make good in disturbed surface at existing location and complete all as specified and as directed.

Supply and fixing as in replacement copper inner tank of 25 Ltr capacity geyser suitable for model of make Usha/Bajaj/Cramption complete all as specified and as directed.

Supply and fixing as in repair for non return valve, 15mm bore, screwed down high pressure, cast copper alloy, chromium plated. complete all as specified and as directed.

Supply and fixing as in repair for pressure release valve 15mm bore 'T' type at inlet/ outlet or dead weight type heavy duty. complete all as specified and as directed.

Supply and fixing as in repair for apparatus plate, suitable for water storage heater type 25 ltrs capacity. complete all as specified and as directed.

Supply and fixing as in repair for fusible plug , calibrated 95 deg to 100 deg C suitable for water heater. complete all as specified and as directed.

Supply and fixing as in repair for glass wool , between the inner and outer vessel of water heater any type and capacity. complete all as specified and as directed.

Supply and fixing as in repair for PVC insulated flexible copper conductor cable (FRLS) 4 Sqmm 3 core , 1100 Volts grade conforming to IS 694. complete all as specified and as directed.

Supply and fixing as in repair 15mm dia GI nipple, 2" long medium grade including GI socket. complete all as specified and as directed.

Supply and fixing in repair rubber gasket as in repair for appratus plate for any type/capacity of geyser complete all as specified and as directed.

Supply and Fixing in repair of LED with reflector for OT light of suitable wattage and colour in existing Shadowless OT light dome complete all as specified and as directed. by Engineer-in-Charge Make :-Meditecindia/MDI or equivalent of other make.

Supply and Fixing in maint of digital controller suitable for existing shadowless OT light complete all as specified and as directed.ed by engineer -in-Charge Make :-Meditechindia/MDI or equivalent of other make.

Supply and Fixing of SMPS suitable for existing OT Light complete all as specified and as directed. by engineer -in-Charge Make :-Meditechindia/MDI or equivalent of other make.

Supply and Fixing in repair of lid cover of suitable power for existing OT light complete all as specified and as directed. by engineer -in-Charge Make :-Meditechindia/MDI. or equivalent of other make.

Supply and Fixing in repair of power cable of suitable size for vexisting OT lights complete all as specified and as directed. by engineer -in-Charge Make :-Meditechindia/MDI or equivalent of other make.

Supply and Fixing in repair of PCB in OT light complete all as specified and as directed. by engineer -in-Charge Make :-Meditechindia/MDI. or equivalent of other make.

Supply and Fixing in repair of sterilizable Handle in OT light acomplete all as specified and as directed. by engineer -in-Charge Make :-Meditechindia/MDI. or equivalent of other make.

Material and labour for replacement of 80-100 mfd Starting capacitor for water cooler of capacity 80/ 150 ltrs, make : Sarda/ Power or equivalent. complete all as specified and as directed.

Material and labour for replacement of running capacitor 10 mfd for Water Cooler of capacity 80/ 150 ltrs, make : Sarada/Power or equivalent. complete all as specified and as directed.

Material and labour for replacement of 15mm bore chromium plated push cock suitable for water cooler of any capacity as per existing shape and make or equivalent. complete all as specified and as directed.

Material and labour for replacement of Thermostat switch for water cooler, complete all as specified and as directed. make : Indfoss or equivalent

Material and labour for replacement of Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed of size 15 mm complete all as specified and as directed.

Disconnecting defective sealed compressor unit of Water Cooler Upto 150 ltrs capacity from the water cooler and fixing repaired/ reconditioned sealed unit compressor in original position complete all as specified and as directed.

Material and labour for replacement of Door gasket for 80/150 ltrs capacity Water Cooler complete all as specified and as directed.

Material and labour for replacement of Starting Relay suitable for water cooler 80/ 150 ltrs capacity complete all as specified and as directed.

Material and labour for replacement of Overload protector suitable for Water Cooler of capacity 80/150 ltrs complete all as specified and as directed.

Material and labour for replacement of Starting relay box type for Refrigerators of capacity upto 315 ltrs complete all as specified and as directed.

Material and labour for replacement of Capillary copper tube of size 0.36 mm for Refrigerators of capacity upto 315 ltrs complete all as specified and as directed.

Material and labour for replacement of Cooling coil for Refrigerators of capacity upto 315 ltrs complete all as specified and as directed.

Material and labour for replacement of Freezer door for Refrigerators of capacity upto 315 ltrs complete all as specified and as directed.

Material and labour for replacement of Thermostat switch (Make : Indfoss/Kelvinator) for Refrigerators of capacity upto 315 ltrs complete all as specified and as directed.

Material and labour for replacement of Chill tray for Refrigerators of capacity upto 315 ltrs complete all as specified and as directed.

Disconnecting defective condensor coil of Refrigerators upto 315 ltrs capacity and replacing the same with new condensor coil and fixing in original position as per existing complete all as specified and as directed.

Material and labour for replacement of Inner lights for Refrigerators of capacity upto 315 ltrs complete all as specified and as directed.

Disconnecting defective sealed compressor unit of Refrigerators upto 315 ltrs capacity and fixing repaired/ reconditioned sealed unit compressor in original position complete all as specified and as directed.l

Material and labour for replacement of Door switch for Refrigerators of capacity upto 315 ltrs complete all as specified and as directed.

Material and labour for replacement of 5 Amps, 230 Volts Plug Top complete all as specified and as directed.

Material and labour for replacement of 16 Amps, 3 pin, 240 Volts Plug top complete all as specified and as directed.

Material and labour for replacement of Plug top for earth plug socket of capacity upto 30 Amp. complete all as specified and as directed.

Supply and fixing MCB protected Power Unit with 16 - 25 Amp MCB, Motor Starter, Socket and Plug Top with indicating light of make: North West/ Havells/indoasian or equivalent. complete all as specified and as directed.

Material and labour for charging of Refrigerant R-22 in Water Cooler and Refrigerator complete all as specified and as directed.

SKY TONE

RADHA ENTERPRISE

Tirupati Buildcon Pvt. Ltd.

M/S J S ENTERPRISES

PODDAR SALES CORPORATION

SUDHA ENTERPRISES

MASTER BUILDERS