REPAIR MAINT OF INTERNAL ELECTRIFICATION IN AGE BR- II AREA WITH ALLIED WORKS UNDER AGE EM AT GE FAIZABAD

Amount

Taking down carefully copper / aluminium point wiring (light, fan, call bell, two way, socket or power) complete with fitting & fixtures such as switches, ceiling roses, pendants, regulators, tube fittings and other kitS&Fittings, removing unserviceable materials from work site and making good disturbed portion / surface of wall/ floor/ ceiling etc by using cement mortar (1:4) including white / colour wash / distempering etc as required to match with the existing surfaces / location complete all as specified and as directed.

M&L for new concealed type point wiring with PVC insulated PVC unsheathed electric (FRLS) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including non-modular type GI sunken boxes suitable for non-modular switches/sockets etc with 3mm thick hylam sheet with glossy finish including necessary cutting for fixing switches, sockets, regulators etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified for the following:-

All as per Srl item No. 2.00 above but for one light/fan point controlled by one, one way switch

All as per Srl item No. 2.00 but for one bell point controlled by one bell push.

All as per Srl item No. 2.00 but for one light point controlled by 2 Nos two way switch

All as per Srl item No. 2.00 but for one socket outlet point 6 Amps on independent board

All as per Srl item No. 2.00 but for One socket outlet point 6 A on same board

All as per Srl Item No. 2.00 here in before but concealed point wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable and 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable, green colour as earth continuity wire for 16 Amps power socket point controlled by one, one way 16 Amps non-modular switch on independent board complete all as specified and directed.

All as per Srl Item No. 2.00 here in before but concealed point wiring with 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable, green colour as earth continuity wire for one AC socket point on independent board complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole one way 6 Amps complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole two way 6 Amps complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole one way 16 Amps complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 6 Amps flush type complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 6/16 Amps flush type complete all as specified and directed.

S&F bell push piano flush type polycarbonate single pole, 5 Amps complete all as specified.

M&L for ceiling rose in polycarbonate 3 terminal brass flush type 6 Amps, 250 Volts, AC supply (ISI marked), fixed on & including 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet complete all as specified and directed.

S&F electronic fan regulator 230 Volts, stepped type (5 steps) socket type, hum free 100/300 watt, complete all as specified and directed.

S&F in replacement, bell/buzzer Ding Dong type AC 230 Volts complete all as specified and directed.

M&L for new concealed type point wiring with PVC insulated PVC unsheathed electric (FRLS) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including modular type GI sunken boxes suitable for modular switches/sockets etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified for the following:-

All as per Srl item No. 14.00 above but for one light/fan point controlled by one, one way switch

All as per Srl item No. 14.00 above but for one bell point controlled by one bell push

All as per Srl item No. 14.00 above but for one light point controlled by 2 Nos two way switch

All as per Srl item No. 14.00 above but for one socket outlet point 6 A on independent board

All as per Srl item No. 14.00 above but for one socket outlet point 6 A on same board

All as per Srl Item No. 14.00 here in before but concealed point wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable and 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable, green colour as earth continuity wire for 16 Amps power socket point on independent board controlled by one, one way 16 Amps modular switch complete all as specified and directed.

S&F modular type white colour switch 6 Amps one way, AC 230 Volts in one module all as specified and as directed.

S&F modular type white colour switch 6 Amps two way, AC 230 Volts in one module all as specified and as directed.

S&F modular type white colour switch 16 Amps one way, AC 230 Volts in one module all as specified and as directed.

S&F modular type white colour shuttered socket 6 Amps 2/3 pin combined, 230 Volts in 2 modules all as specified and as directed.

S&F modular type white colour shuttered socket 16 Amps 2/3 pin combined, 230 Volts in 2 modules all as specified and as directed.

S&F modular type white colour bell push 6 Amps, 230 Volts in 2 modules all as specified and as directed.

S&F modular stepped type energy saving electronic fan regulator white colour 120 Watt, AC 230 Volts suitable for 2 modules including connecting complete all as specified and as directed.

S&F in replacement, plug and DBOX MCB Protected Socket complete with 25 Amps MCB DBOXX COMBO DP, 240 volts single phase for AC all as specified and directed

Taking down existing submain wiring of any description and M&L for sub main wiring with two runs of 10.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 Volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 10.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly from main DB to Sub DB including cutting chases and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified. Note:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs and MCBs shall be deemed included in quoted rates. (iii) Earth wire shall run inside the conduit pipe.

All as per srl item No. 24.00 here in before but submain wiring with two runs of 6.00 Sqmm FRLSH PVC insulated copper conductor and one run of 6.0 Sqmm FRLSH earth continuity conductor complete all as specified.

All as per srl item No. 24.00 here in before but submain wiring with two runs of 4.00 Sqmm FRLSH PVC insulated copper conductor and one run of 4.0 Sqmm FRLSH earth continuity conductor complete all as specified.

M&L for rigid non-metallic PVC conduit of 20 mm dia including all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for dressing of hanging wires all as specified and as directed.

S&F modular cover plate with frame 1 module as per existing as directed by Engineer-in-Charge.

S&F modular cover plate with frame 3 module as per existing as directed by Engineer-in-Charge.

S&F modular cover plate with frame 4 module as per existing as directed by Engineer-in-Charge.

S&F modular cover plate with frame 6 module as per existing as directed by Engineer-in-Charge.

S&F modular cover plate with frame 8 module as per existing as directed by Engineer-in-Charge.

Taking down unserviceable main switch, DB’s insulators, DB for MCB and board etc of any type and any capacity and further disposal including making good the disturbed surfaces in cement mortar (1:4) including applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and as directed.

S&F epoxy powder coated MCB distribution box double door TPN 8 way vertical type for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed. Note: - MCBs shall be measured and paid for separately under respective item of Schedule 'A'.

S&F epoxy powder coated MCB distribution box double door TPN 6 way vertical type for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed. Note: - MCBs shall be measured and paid for separately under respective item of Schedule 'A'.

S&F epoxy powder coated MCB distribution box double door TPN 4 way vertical type for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed. Note: - MCBs shall be measured and paid for separately under respective item of Schedule 'A'.

S&F epoxy powder coated MCB distribution box double door TPN 4 way horizontal type for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed. Note: - MCBs shall be measured and paid for separately under respective item of Schedule 'A'.

S&F epoxy powder coated MCB distribution box double door SPN 8 way vertical type for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed. Note: - MCBs shall be measured and paid for separately under respective item of Schedule 'A'.

S&F epoxy powder coated MCB distribution box double door SPN 4 way vertical type for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed. Note: - MCBs shall be measured and paid for separately under respective item of Schedule 'A'.

S&F MCB, TPN,100 A, 415V, 10kA, 'C' curve miniature circuit breaker (MCB), fixed in DB including necessary connection, testing and commissioning, complete all as specified.

S&F MCB, TPN, 63 A, 415V, 10kA, 'C' curve miniature circuit breaker (MCB), fixed in DB including necessary connection, testing and commissioning, complete all as specified.

S&F MCB SP, 6 to 32 A, 230 V, 'C' curve, 10 kA, miniature circuit breaker (MCB), fixed in DB including necessary connection, testing and commissioning, complete all as specified.

S&F in replacement, LED tube light fitting,1X20 Watt surface and wall mounted decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use pack fitting including connection with & provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S&F in replacement, batten LED fitting 1x10 Watt, Cool Day Light (CDL), elite pride plus 5Watt 6500K LED including connection with & provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S&F in replacement, building security light LED 20 Watt, IP 66, including provision of GI bracket of siutable size, clamp and nut & bolt etc including PVC insulated flexible wire 3 core 23/0076 copper conductor, complete all as specified.

S&F in replacement, 1x36 Watt LED fitting 2'X2' suitable for ceiling mounting, environmental friendly, new generation, aesthetically designed, ultra modern luminaire with high brightness SMD LEDs as light source including all fixing accessories complete all as specified and directed.

S&F in replacement, decorative wall light fixture made up of Polycarbonate, suitable for 9 Watt retrofit LED Lamp B22 base fitting including connection with & provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S&F in replacement, angle holder (metal ring) PVC / polycarbonate type with back plate, fixed on & including 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet suitable for LED bulb complete all as specified and directed.

S&F in replacement, modular type switch 6 Amps one way in one module as per existing all as specified and as directed.

S&F in replacement, modular type switch 16 Amps one way in one module as per existing all as specified and as directed by Engineer-in-Charge.

S&F in replacement, modular type shuttered socket 6 Amps 2/3 pin combined in 2 modules as per existing all as specified and as directed by Engineer-in-Charge.

S&F in replacement, modular type shuttered socket 16 Amps 2/3 pin combined in 2 modules as per existing all as specified and as directed by Engineer-in-Charge.

S&F in replacement, switch piano flush type one way 6 Amps as per existing as specified and directed by Engineer-in-Charge.

S&F in replacement, switch piano flush type one way 16 Amps as per existing as specified and directed by Engineer-in-Charge.

S&F in replacement, socket outlet 5 pin, 6 Amps flush type as per existing as directed by Engineer-in-Charge.

S&F in replacement, socket outlet 5 pin, 16 Amps flush type as per existing as directed by Engineer-in-Charge.

S&F in replacement, flexible twiste twin core copper wire of size 23/0.0076 complete all as specified.

S&F in replacement, single core 1.5 Sqmm nominal cross sectional area multistrand copper conductor cable FRLS, PVC insulated unsheathed 1100 Volts grade including taking out existing cable, complete all as specified.

All as per Srl item No. 58.00 above but 2.5 Sqmm cable.

All as per Srl item No. 58.00 above but 4.0 Sqmm cable.

Taking down existing earthing of any description and M&L for new earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earthing wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earthing wire protected by GI pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) type C1 in chamber of size not less than 300x300x300mm (internal diamentions) with cover made of RCC (1:2:4), type B-1, reinforced with 8 mm dia TMT bars @ 15 cm C/C both ways and angle iron 40X40X5mm frame etc duly painted with two coats of synthetic enamel paint over a coat of red oxided primer on exposed surfaces complete all as specified and directed by Engineer-in-Charge. Note: The unit rate includes earthing wire and protection pipe upto maximum 7.5 metre from earth plate, earth point / test point.

Khan Brothers

M/s A.K Construction

M/s SINGH CONTRACTOR WORKS

Pleiad Complex On

Mohit Enterprises

Avion Industries

m/s allied enterprises

His And Her Enterprises

M/S AVADH ENTERPRISES

M/s Deeksha Construction electrical & Refrigeration & works

Hindustan Power Corporation

PITAMBARI TRADERS

Aawadh associates