REPAIR TO MISC FURNITURE AT AF STN UTARLAI

Amount

Removing the unserviceable/wornout components without damaging the existing/specification components. Supply & fix new components given below but as per TP/Godrej pattern table conference/executive table/Table office Modular cubical work station of size 6600 x 675 x 750 mm for following items. Note:- The new components shall be made out of Ist class hard wood (Indian teak wood) duly french polish to match the existing components as shown in the drawing.

Short rails

Long rails

Replacement of unserviceable table top with supply & fixing New 18/19 mm thick one side teak face prelaminated particle board exterior grade duly covered with 20mm wide teak wood beading/lipping 4mm thick duly polished fixed using fevicol complete all as specified and measured.

All as per item No 1 above but chair dining for officer for following item as per Drg No - FD/MAP-II/04

Front legs alongwith shoes

Rear legs alongwith shoes

Back Rest

Stiffener

S&F Cushion as per shown in drg 32 to 40 density make: Sleep well/Kurlon/Cool Foam with cover made from tapesty/velvet cloth superior quality as aproved by GE/Engineer-in-Charge.

Removing the worn out tapestry cloth from sofa set, supply & fix with new tapestry/ velvet cloth superior quality as approved colour by GE/Engineer-in-Charge. Complete all as specified in Drg FD-285, 281 & 373

Sofa Set 5 seater

Sofa set 4 seater

Sofa single seater

Supply only foam cushion 32 to 40 density for sofa set FD-281, 373, Make Sleep well/Kurlon/Cool Foam

Removing of damaged/unserviceable newar, cane plastic from chair verandha and re-canning with 4mm wide cane shall be used, canning shall be Godrej pattem all as per shown in drawing (Colour of white/ivory) and all as directed by E-in-Charge. Drg : FD - 256.

M&L for painting to the external steel surfaces duly cleaning the surface with emery paper providing one coat of synthetic enamel white paint glossy finish complete all as specified.

Repairs to chair verandah steel/Chair Verandah with PVC seat by taking out the following worn-out components wihtout damaging the existing componects and replacing the same with new componets all as per drawing Drg No FD/E6/MAP/11, FD-256, FD/MAP-II/06.

MS Flat

Welding at any point

S&F in replacement of PVC seat and back shall be of 4mm thick with weight not less than 1.85 Kg each and groover 90 x 10mm 10 Nos seat and back.

M&L for painting to the external steel surfaces duly cleaning the surface with emery paper providing one coat of synthetic enamel white paint glossy finish complete all as specified.

Repairs to chair revolving high/ long/back tackig out the following wornout components without damaging the existing components and replacing the same with new components complete all as specified and directed by Engr-in-Charge. Drg No - TP

Removing of unserviceable cushion with tapestry cloth/Rexine of seat & backand replacing the same with new cushion with tapestry cloth/Rexine induding all around PVC lipping as approved.

Removing unserviceable/damaged caster wheel and fixing new caster wheel as per sample approved.

Remove unserviceable hand rest and supply and fixing new hand rest matching the old hand rest.

S&F new revolving cistern

S&F new base complete

Repair to table workshop of different sizes (3600x675x750mm/3000x760x760mm/2100x900x760mm/2000x1220x900mm) including navigation table. Note:- The new components shall be made out of Ist class hard wood (Indian teak wood) duly french Polish to match the existing components as shown in the drawing shown.

Legs of size shown in drawing.

Short rails of size shown in drawing.

Long rails of size shown in drawing.

Replacement of unserviceable table top with supply & fixing New 18/19 mm thick one side teak face prelaminated particle board exterior grade duly covered with 20mm wide teak wood beading/lipping 4mm thick duly polished fixed using fevicol complete all as specified and measured.

M&L for preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfacer in SI No 7.00

All as per item No. 1.00 above but chair easy for the following items:- Drg No FD-229.

Side rail of seat frame

Rear rail of seat frame

Front rail of seat frame

Front leg with PVC shoes

Rear leg with PVC shoes

Back res side rail

Back rest upper/lower rail

Arm rest

M&L Prepareation of polished wooden surfaces by sand paper & appling one coat of french polish on exposed surfaces complete all as specified.

Material and labour for recanning of Chair easy plastic with new vergin quality plastic cane of size 2 mm wide white for weaving and 4mm wide plastic cane for borders as per Godrej pattern after removing the existing unservicealbe cane as specified and as directed by Engr-in-Charge.

M/s godara infratech and power industries