TENDER FOR ITEM RATE CONTRACT FOR ADDN/ALTN OF SHED OF PATIENTS WAITING AREA NEAR MI ROOM AT MH UNDER GE (U) E/M MEERUT

Amount

Excavating in trenches( in hard/dense soil), n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc or for shafts, well, cesspits, manholes, pier holes etc n. exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as spd & directed

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles.

M & L Providing plain cement concrete 1:4:8 Type D2( 40 mm graged aggregate) as in foundations ,filling and mass concrete etc complete all as spd & directed

M&L for brick work with old size fly ash bricks bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 all as specified and as directed.

M& L for hardcore (broken bricks) of gauge exc 63 mm but n. exc 100 mm deposited, spread and levelled in layers n. exc 15 cm thick , watered and rolled/ rammed to a true surface

M & L for providing cement concrete typeC-1, 1:3:6 (20 mm graged aggregate) as in plinth protection etc complete all as specified & directed

M&L for reinforced cement concrete nominal mix type B1, 1:2:4 (using 20 mm graded aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.;all as specified and directed.

M&L for reinforced cement concrete nominal mix type B1 1:2:4 (using 20 mm graded aggregates) in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed

M&L for reinforced cement concrete nominal mix type B1 1:2:4 (using 20 mm graded aggregates) in columns pillars post etc all as specified and directed

Use and waste of formwork to sides of plinth beam,footings bases of columns etc complete all as specified and directed

Use and waste of formwork to sides of roof beam,lintel, cantilever, concrete surface finished fair complete all as spd

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as spd

S&F Mild steel TMT bars 10 mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as specified and directed

All as item No 14 above but 5mm dia and over upto and including 10 mm dia as in stirrups spacers and binders complete all as spd and directed

M&L for rendening 10mm thick in CM 1:6 for fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and as directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement) in cement mortar 1:4 complete all as spd & directed

M&L for preparing new plastered surfaces of walls by applying 2mm thick cement base putty and applying two coats of oil bound distemper complete all as specified and as directed.

M & L for preparing newly platered surface and applying two coat cement based paint over a coat of primer all specified and as directed.

M & L for providing cement concrete Type B0 1:2:4(12.5 mm graded aggregate) as in lintel upto 1.5m clear span , cills, steps,seismic and other similar bands, plinth courses, string courses, lacing courses, parapet and railing upto 60cm height, copings, kneelers, apex stones, bed plates, water troughs and the likes incl weathering, slightely rounded or chamfered angles and throating etc complete all as spd & directed

M & L for returning filling in hard and dense soil , including spreading , levelling , watering and well ramming in layers not exc 25 cm complete all as spd & directed

M & L for Removing excavated material (soils) n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point all as spd & directed

M&L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick backing coat in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as spd and directed

S&F 4 mm thick Asbestos cement designer /decorative ceiling board make - Everest and tee grid suspension system of size 600mm X 600 mm ( type I) made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gram/square metre main runner shall be 0.30 mm thick of section 24 mm X 33 mm , cross runner of 0.30 mm thick of section 24 mm X 25mm, wall angle shall be 0.40 mm thick of section 24 mm X24 mm, grid shall be suspended by 2mm dia mild steel galvanised wire, exposed portion shall be prepainted polyester coated in off white colour complete with material, fixing jointing etc all as per manufacture's instructions and as specified and directed by Engineer-in-Charge

S&F powder coated aluminium window shutter side hung glazed/gauzed shutter with frame using with aluminium extruded section of Make- Jindal, Hindalco or Nalco, box section of size 63.50 mm X 38.10 mm for frame and 47.62mm x 44.45 mm for shutter styles and rails, thickness of aluminium sheet 1.25 mm with 15 micron anodizing and glazing with and including 5 mm thick tinted float glass fixed with and including aluminium U channel and glazing plates at bottom including aluminium anodized triangular glazing beading with U rubber stays etc with and including aluminium anodized fancy grill and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with suitable size of aluminium anodized strips fixed to aluminium frame (chowkhats) including provision of stainless steel hinges of 75mm size 02 Nos on each shutter, aluminium anodized fancy type handle of suitable size 02 Nos for each shutter, aluminium anodized tower bolt of extruded section 125mm long 02 Nos on each shutter complete all as specified and directed. Note : Fitting shall be powder coated of same colour of window. PVC protected sheeting shall be used while fixing the frame of doors, windows etc to avoid damages, scratches etc.

Material & labour point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings.

One Bulb /Tube light point controlled by one, one way switch 5/6 Amps

One fan point controlled by one, one way switch 5/6 Amps

One 3 Pin, 5 /6 Amps socket outlet point on independent board controlled by one, one way 5/06 Amps switch

One 3 Pin, 5 /6 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No 28.03 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

All as per serial item No 28.03 above but with 4 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

Supply & fixing switch piano flush type , 5/6 Amps single pole , one way 240 volts complete all as specified & directed

Supply & fixing switch piano flush type, 15 /16 Amps single ploe, one way 240 volts complete all as specified & directed

Supply & fixing socket outlet 3 pin, 5/6 Amps (2 in 1 multipurpose) flush type 240 volts complete all as specified & directed

Supply & fixing socket outlet 3 pin, 15/16 Amps (2 -in-1 Multipurpose) modular type 240 volts complete all as specified & directed

Supply & fixing of ceiling rose surface bakelite 65x 50mm three terminals complete all as specified & directed.

Supply and fixing Light emitting diode (LED) tube light fitting surface/pendent mounting decorative box type AC 220-240 V,50 hz, CRCA body with arcylic diffuser 20 watt,4' long and making connections with and including 23/0.0076 flexible cord of required length fon ceiling rose to connector complete all as specified & directed .

Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB , SPN, AC, 240 volts of 63 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing Isolator , FP, AC, 415 volts of 100 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

S&F epoxy powder coated distribution box ,SPN,8 ways,240 Volts, IP-43 , metal double door for MCB ,grouted flush to walls including making good surfaces of walls to match the adjoining surfaces complete all as specified and directed.

Taking down of existing unserviceable sheet metal enclosures(DB) complete and removing and S&F epoxy powder coated distribution box ,TPN,4 ways,415 Volts, IP-43 , metal double door for MCB ,grouted flush to walls including making good surfaces of walls to match the adjoining surfaces complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps,240Volt

Supply and fixing stepped type electronic fan regulator, flush type on the existing phenolic laminated sheet etc as reqd

M&L submain wiring comprising two run of FR PVC insultaed and unsheathed multistand copper conductor of nominal cross sectional area 6 sqmm alongwith one run of earth continuity conductor of nominal cross sectional area 4 sqmm copper conductor drawn through and including PVC casing caping of suitable size concealed type all as directed including making good to disturbed surfaces.

Supply and fixing Light emitting diode (LED) panel recess mounting 2'x2' 36 watts,6000K ,diffuser type optics, light fitting with seperate electronic driver complete including holes of required size in flse ceiling and making good disturbed surfaces complete all as specified & directed .

S&F air cooled window type,airconditioner,electric driven,single phase of capacity 2 TR cooling and heating energy efficient complete fixing in windows/wall with ready made iron stand and frame complete all as specified and directed. (Make:- Voltas/Hitachi/LG as approved)

Supplying,laying or fixing ,jointing and testing LT under ground electric power cable crossed linked polyetehene (XPLE cable) insulated , galvanised steel strip or wire armoured ,ISI 7098 marked with aluminium conductor muli stranded heavy duty 1100 volts grade of 25 sqmm 4 core complete all as specified in trnches /laid under floor or fixed naked with walls/on poles/in ducts/in GI pipes etc (Excavation,earth work,sand cushioning,protection bricks and pipe shall be measured and paid separetly under appropriate items)