8414 REPAIRS TO WOODEN JOINERY, ALUMINIUM JOINERY, WPT TO SUNKEN PORTION, PLUMBING, TILING IN MD ACCN AT 10 SIKH, VBV, DCA, MAP Ph-l AREA UNDER AGE BR I SOUTH PUNE

Amount

Dismanling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to MES store yard and rubbish off the premises, complete all as specified and directed.

M&L for coloured Ceramics tiles 200x300x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces, complete all as specified and directed.

M&L for coloured Ceramics tiles 450x300x7 to 8mm thick on vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry, complete all as specified and directed.

M&L for non skid ceramic colored tiles 7 to 8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in flooring etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.

M & L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.

Demolition of stone slab & tiles of any description or thickness in floor, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed.

M & L for granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick as in steps, jambs, pillars, window cill, cooking platform and flooring set in CM 1:4 including pointing in white cement 1:2 using marble dust without mixture of pigment to match with shed of granite including 15 mm thick screed bed of CM 1:4, complete all as specified and directed.

M&L for machine cut cudappah stone slab 20 to 25 mm thick, set, jointed & pointed in grey cement slurry mixed with pigment to match the shade of slab including grinding, rubbing and polishing etc complete all as specified and directed.

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified & directed.

Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed.

M&L for 10mm thcik rendering in CM 1:6 on PCC / concrete block wall surfaces, finished the surfaces even and smooth with sagol finish, complete as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on ceiling surfaces and finished even and smooth without using extra cement, complete as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including 2 mm thick wall care putty, complete all as specified and directed.

M & L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling, complete as specified and directed.

S & F in repairs 15 mm bore GI tubing, medium grade including with all fittings & fixtures, fixed to walls / ceiling or laid in floors, complete as specified and directed.

S & F in repairs 20 mm bore GI tubing, medium grade including with all fittings & fixtures, fixed to walls / ceiling or laid in floors, complete as specified and directed.

S & F vitreous china squatting pan of “Orissa” pattern of size 580 mm x 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor by providing cement concrete type-B-1 bedding complete all as specified and as directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.

S & F in repairs wash hand basins, vitreous china of size 550mm X 400mm ( flat back or angle back type) with and including cutting for and pinning in ends of brackets or erecting stand, waste coupling and waste pipe etc, complete all as specified and as directed.

S & F in repairs 15 mm bore pillar taps, fancy type swan neck spout (Left) and aerator, cat No. F2002104 of cera or of equivalent make as specified here-in-after, complete all as specified and as directed.

S & F in repairs 15 mm bore pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lattered " HOT" or " COLD" with long screwed shanks and fly nuts, complete all as specified and as directed.

S & F in repairs 15 mm bore bib taps, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F 32 mm bore waste fittings brass chromium plated with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and as directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends, complete all as specified and directed.

S & F in repairs 15 mm stop valves, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union, complete all as specified and directed.

S & F in repairs 15 mm concealed stop valves, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union, complete all as specified and directed.

S&F 10 litres capacity, PVC flushing cistern, low level including PVC waste coupling & PVC flush pipe of 32 mm dia and complete internal macanism including brackets, complete all as specified and directed.

S&F 100 mm dia PTMT grating doom, having minium weight 25 grams, complete all as specified and directed.

S&F brass chromium plated shower rose, 125mm size with swivel joints, including fixing to steel pipe or union of 15mm bore, complete all as specified and directed.

S&F in repairs 500 litres capacity rotational moulded polythylene water storage tanks of tripple layers (cylindrical vertical with colsed top) hoisted and fixed in postion with and including 20mm bore ball brass valve, high pressure, with polythene float and flynut and tank nipple of suitable size, complete all as specified and directed.

S & F transparent Glass 7.5 x 7.5 inch as in corner bathroom shelves with bracket (set of 2) (Model- Joyo Cera Gls 132 or equivalent make), complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.

Taking down wooden door shutter and refixing in including resecuring or easing and adjusting in the same opening n exc. 1.00 sqm each, complete all as specified and as directed.

Taking down wooden door shutter and refixing in including resecuring or easing and adjusting in the same opening exc. 1.0 sqm and n. exc. 2.00 sqm each, complete all as specified and as directed.

S & F in repair 25mm dia aluminium poweder coated curtain rods with fixing fancy type bracket, stops etc including taking down old one complete all as specified and directed by Engineer-In-Charge.

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc and match with complete all as specified and directed by Engineer-in-Charge.

M&L soap dish chromium plated brass fixed with brass screws, complete all as specified and as directed.

S&F in repairs PVC (SWR) 75mm bore pipes single socketed, in any length with rubber ring joints, fixed to walls as in rain water pipe, complete all as specified and directed.

S&F in repairs PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, fixed to walls as in rain water pipe, complete all as specified and directed.

S&F PVC (SWR) bends / Tee with acess door for 110mm bore, complete all as specified and directed.

S&F PVC (SWR) bends/Tee with acess door for 75mm bore, complete all as specified and directed.

Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sqm but n. exc.4 sqm each, complete all as specified and directed.

S & F in repairs pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm with and including MS hold fast - 3 Nos., MS cold rolld 100mm size butt hinges - 03 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.

S&F 30mm thick flush shutters, solid core contruction, with block board core and plywood face panels, one face is covered with decorative face veneer with lipping / frame to match and other face commercial type, complete all as specified and directed.

S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters, devided into squres with plain, chamfered or rounded mitered and rebated sash bars any numbers, open rebated prepared to receive guaze, edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing glass etc size of members of shutters shall be as per SSR Part- I, Section 8, Clause 8.24 (a), complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete al as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm & fixed with stainless steel wire stapples, complete al as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings, complete al as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S & F 100 mm long butt hinges medium weight , cold rolled Mild steel for door shutters, complete al as specified and directed.

S&F 150 mm aluminium anodized barrel tower bolts of extruded section for door shutters, complete al as specified and directed.

S & F 300 mm long aluminium alloy , anodised sliding door bolt with hasp , staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed, complete al as specified and directed.

S & F 150 mm extruded aluminium alloy handles, fabricated type anodised, complete al as specified and directed.

S & F sheet glass 4 mm thick plain or tinted, fixed to aluminium frame in partition / window exc. 0.50 sqm with and including beading / rubber packing, complete al as specified and directed.

Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed.

Taking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and S&F new sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed with beads, each pane n. exc 0.5 Sqm in area, complete all as specified and directed.

Taking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and S&F new frosted glass 3mm thick ordinary quality and glazing with oil putty or fixed with beads, each pane n. exc 0.5 Sqm in area, complete all as specified and directed.

S & F hasp and stapple aluminium anodised safety type with MS hinges pin including bolt to hinge plate and fixed with screw 75 mm size, fixed as in repairs, complete all as specified and directed.

S&F stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304 of standard size 30"x32"x8"/10" and of approved quality of finish, complete all as specified and directed.

S&F in repair two legged aluminium floor door stopper with rubber shoe 140mm long, complete all as specified and directed.

Taking down / cutting steel window shutters by means of gas cutter without disturbing of soffit / jambs / cills etc. of any description n.exc. 1.5 sqm (without taking off guard bars), complete all as specified and as directed.

S&F three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

S&F 35 mm thick factory made 2nd class hardwood plain framed panelled shutters/ any number member of panels) with panels of timber flat on both sides of wood particle board with commercial face veeners. The size of rail and stile shall be as per IS : 1003 (Part I ) kiln seasoned and chemically pressure treated, complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced, complete all as specified and directed.

M&L for providing cement concrete type C- 1, 1: 3:6 (using 20mm graded stone aggregate) 75 mm thick as in plinth protection finishing even and smooth using extra cement also provive 6mm wide joints throughout the thickness of plinth protection, complete all as specified and directed.

M & L for carrying out non destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles/cracks in floor / wall with and including second course injection of CORESEAL 135A/CORESEAL 135B all as per manufacturers instructions and as directed by Engr-in-Charge. (Note :- The rate is inclusive of replacement of any defective fittings/fixtures of any type/material elbows, bend, tee, reducer single 'Y', double 'Y' with cleaning eye and concealed piece of pipe below floor as well as between wall and bend.) (Makes for this item :- AQUATYTE, CREAT SEAL grouting compound of Ashwin Enterprises, GPSS (ground penetrating sealing system) of Saga polytech or similar brand as approved by Accepting Officer.)

Dismantling structural steel work including doors, gates etc, complete all as specified and directed.

M&L for MS structural steel work, framed as in trusses, purlins, rafter etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position, complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, including preparation of new steel surfaces, complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated etc.) sheets as in roof covering, including dismantling of wind tie etc complete all as specified and directed.

S & F roof sheeting pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Excavation in post holes each n. exc 0.50 cum getting out in soft / hard soil including returning filling and removing surplus soil to a distance n.exc 150m making good disturbed surface, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete / base of fencing posts, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board both side decorative face, including providing second class hard wood 6mm thick beading for edges of board alround complete all as specified and directed by Engr-in-Charge.

S&F in repairs 12mm thick prelaminated particle board one side decorated choice laminated and other balancing side white lamination for replacment of panels of aluminium partition or panels of aluminium doors, complete all as specified and directed by Engr in Charge.

S & F of plain fillet of 2nd class hard wood square, rectangular or triangular in section clean sawn secured with nails or brads sectional area exc. 3 but n. exc. 6 sqcm complete all as specified and directed.

Fixing only 12mm thick prelaminated particle boards, complete all as specified and directed.

S&F brass Locks, cupboard, Gde I, size 65 mm (2 lever) with two keys, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.

M&L for coloured precast cement concrete interlocking tiles 60mm thick, M-35 grade, of any shape and size, conforming to IS-15658-2006 glossy finish as in floor / pavement laid on and including 50mm thick stone dust cushioning, laid dry to the profile over rammed earth / murrum filling, complete all as specified and directed

SARATH ENTERPRISES

Ares Construction Company

Gauri Associates

MONA ASSOCIATES

M/S Sharvi Construction

M/S BRJ & SONS