NITNo2ItemNo10

Dismantling of electric connection of motor and taking out the pump & motor (3MGD/80 HP pump set no 1,2 &3) at floor level with the help of HOT Crane after cutting of foundation bolts and removing of coupling pins of coupling of pump sets. The work including Closing of suction & delivery side sluice valves and providing/fixing dead flange for stopping the water leakage. The work includes arrangement of all the required tool and tackles and safety items for working with safety of man & material as per site required at site

Dismantling of the existing rusted & damaged MS base frame, Nut-bolts and washer damaged M.S. Channels, cross support, base plates, levelling screws, shims etc. with the help of gas cutter with oxygen cylinder and other tools as per site requirement, from the RCC foundation by cutting the nut bolts with the help of gas cutter and taking out of the complete frame up to floor level. The work will be executed through experts skilled & unskilled staff including tool and tackles and safe working with safety of man & materials as required at site

Demolishing of required amount of cement concrete of the foundation of 3 nos pump sets by manually/mechanical means and making proper foundation-bolt pockets including disposal of un-serviceable material within 50 metered as per direction of Engineer-in -charge as required for fresh foundation. DSR 2023 15.2.1

Supply of new SS foundation Bolts of size 25 X 450 mm as per Site requirement. (8 Nos in each Foundation).

Supply of new nut bolts & washer as per site required for reinstallation of Pump sets, valves etc. as per site requirement

supply of neoprene rubber sheet 6mm thick Jyoti/ National make as per site requirement. DJB SOR 22.6

Strengthening of M.S. Base Frames for pump-set and motor fabricated on M.S. Channels (size 50mm x 50 mmx 5 mm) with cross support and base plates dully machined on planner machine to match the centre distance between pump set and motor along with coupling guard etc. as per site requirement. Base plates supported on levelling screws, shims or metal wedges with a small taper located close to the foundation bolts. Ensure that the base plate’s machined mounting surfaces are horizontal, flat and parallel by adjusting the levelling devices and using a precision level. Supply of MS angle of size 50 mm X 50 mm X 5 mm for fixing on surrounding comer of RCC foundation of 3 nos pump sets as per required. Payment will be done ass per actual work at site. Structural steel work in single section, fixed with or without connection plate, including cutting ,hoisting fixing in position and applying a priming coat of approved steel primer all complete DSR 2023 10.1

Providing and laying in position cement concrete of specified grade for grip of foundation bolt in pockets of CC structure and also providing wet layer of cement in old CC structure & Making of proper strengthening to the foundations of 3 Nos pump sets. (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) (As per DSR no.- 4.1.3)

Fixing of new S.S foundation bolts in foundation bolt- pockets by welding and proper support and reinstallation and re fitting of 3 nos pump and motor with base frame after proper drying of the CC foundation, lowering the new pump & motors in the dry sump with the help of HOT crane/ required equipment as per site requirement and making of proper alignment of the pump with existing suction and delivery lines, making proper alignment of coupling between pump and motor with all allied mechanical and civil work, fixing of delivery taper and other parts with new nut-bolts etc.

Making proper electrical connection of motors with all safety precautions. The work is inclusive of testing and commissioning of all the 3 pump sets at no load and at full load successfully.

Testing of the complete line network with new foundation on Load and no Load with vibration free smooth operation.

TUSHAR ENTERPRISES (BID ID -1587120)

Shivam Enterprises (BID ID -1587117)