SPL REPAIR TO BLDG NO CB 09 SIG EXCHANGE AND PROVN OF TOILET BLOCK FOR STAFF AT CB 01 YO MESS AT THE INF SCHOOL MHOW AND PROVN OF CERTAIN MINOR WORKS UNDER GE MIS MHOW

Amount

Taking down shuters of any description nexc 1 sqm each and removing from site complete all as specified and as directed.

Taking down shuters of any description exc 1 sqm but n.exe 2 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but nexc 4.0 sqm each complete all as specified and as directed.

S&F pressed steel door frames of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified as directed

S&F 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,hold fast includ etc complete all as specified and as directed.

S&F Mild steel angle or flat iron, small articles such as hold fast , brackets, straps, cleats, etc for door/window chowkats including two coats of red oxide primer complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bed blocks of hold fast, etc complete all as specified and as directed.

S&F 35mm thick factory made 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 30 mm thick factory made, 2nd class hard wood glazed and skeleton shutters, open rebeated and prepared to received glass, gauzed divided into suare with sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (b) for window and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour/wood grain PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour/wood grain PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour/wood grain PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete complete all as specified and as directed

S&F stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

S&F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed/Glass and one shutter wire mesh) with following specification complete all as specified and as directed by Engineer-in-charge. (i) Windows frame of cross section 101mm x 44mm (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm (iii) Sliding shutter frame of cross section 40 x 18mm (iv) 4 mm thick glass superior quality. (Min) (v) LDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (Min) (vii) Sliding rollers per shutter - 04 Nos. (Min) (viii) Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. Note- (a)Thickness of Aluminium Section shall be minimum 2 to 3mm (Final Thickness and Cross Section of Aluminium section of higher size without any extra cost shall be approved Engineer in Charge as per Site requirement (b) Drawing /size of window shall be provided by Engineer in Charge during execution of work as per site requirement.

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F powder coated aluminum door with the following specification and making good the adjacent surfaces, complete all as specified and as directed. (a) Cross section of chowkhat frame 101.60x44.45mm (b) Cross section of hanging and meeting style 83x44mm (c) Top rail of cross section 114x44mm (d) Bottom rail of cross section 114x44 mm (e) Locking rail (middle rail) of cross section 83x44 mm (f) 4 mm thick glass superior quality. (Min) (g) Aluminum handle eisc type -02 Nos per shutter (inside & out side). (h) Aluminum door stopper heavy duty-01 Nos per shutter. (i) Aluminum tower bolt 200mm long-01 Nos per shutter (inside). (j) Concealed Lock with key superior quality makae and type as approved by GE openable both from inside & out side -01 Nos per shutter. Note- (a)Thickness of Aluminium Section shall be minimum 2 to 3mm (Final Thickness and Cross Section of Aluminium section of higher size without any extra cost shall be approved Engineer in Charge as per Site requirement (b) Drawing /size of window shall be provided by Engineer in Charge during execution of work as per site requirement.

S&F fabricating coloured powder coated aluminium frame work,door shutter ,windows , ventilators, partisions with one or more rebates sections of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.

S&F aluminium coloured power coated window and ventilator shutters, sliding type without sash bar alu section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified and directed.

S&F sheet glass ordinary quality,figured 3mm thick and glazing with oil putty in squares. not exc 0.5 Sqm each complete all as specified and as directed.

S&F aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F 100 mm Butt hinges medium weight cold rolled stainless steel and fixed complete all as specified and directed.

S&F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete all as specified and directed.

S&F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete all as specified and directed.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F aluminum alloy handles fabricated anodised of 150 mm long complete all as specified and directed. .

S&F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring and rubber piece in floor, etc complete all as specified and directed.

S&F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed.

S&F in repairs pre-laminated particle board 18/19mm thick interior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works as in cupboard shutter / cupboard shelves, pelmet, with and including external teak wood lipping 6mm thick and 18/19mm wide fixed with nails on edges complete all as specified and directed.

S&F in repairs 25 mm dia mild steel chromium plated stainless steel curtain rod with fixing bracket complete all as specified and directed .

M&L for preparation of old painted surface of Wood of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.

All as per item No. 33.00 above but on steel surfaces. complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions ,arcches , pillars etc complete all as specified and as directed.

M&L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of rust remover by brushing to rusted reinforecemnt to remove loose rust particles and allow to dry it for 2 to 3 Hrs , insert the new reinforcement to damaged portion by drillig hole at required distance , fill the epoxy in to the hole by 2/3 of the hole and insert the reinforcement in the hole, and binding the reinforcement at rusted portion of reinforcement, apply cement slurry on entire damaged area , and plaster the surfaces with cement, sand and Polymer liquid in 1:3 : 15% of cement by weight ) and water as required , mixing properly and plaster the surface , finished even and smooth by making the edge water dropping groves complete all as specified and directed. Note : - Cost of formwork shall be deemed to be included in quoted rate.

M&L for brick work in CM ( 1:6 ) with using flyash bricks modular size, straight or curved on plan exceeding 6m mean radius complete all as specified and directed.

M&L for rendering 10mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and fair without using extra cement complete all as specified and directed. Note:- Liquid water proofing compound to be measured paid separately.

Supply onle liquid water proofing Compound @ 200ml per beg of cement complete all as specifed and directed.

Complete removal of old treatment on internal/External surfaces of wall & celling by scrapping , and washing etc complete all as specifed and directed.

M&L for applying two coats of first quality oil emulsion distember over a coat of primer over a coat of Acrylic / Water proofing wall Putty on walls complete all as specified. Note:- Putty shall be measured and paid seperately under relevant item.

M&L for wall, pillasters, cornices etc precoat treatment apply two coats of Anti fungal weather coat acrylic emulsion paint over a one coat of wall care acrylic putty and apply coat of primer (X2) complete all as specified and directed. Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield) / Make as per Particular specification as approved. Make of primer :- Asian (X2) or Equivalent Note :- (a) Each stage i.e preparation of surfaces,application of primer,application of first coat. application of second coat will be got passed from Engr-in-Charge (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item (c) Putty shall be measured and paid seperately under relevant item.

M&L for preparation of new plastered surfaces of walls and applying two coat of Acrylic Smooth exterior paint of required shade (@ 1.67 ltr/10 sqm) over over a coat of primer(@ 2.20 kg/10 sqm) same make base all as specified and directed. Make of Arcylic paint :- Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield) / Make as per Particular specification as approved. Make of primer :- Asian (X2) or Equivalent Note :- (a) Each stage i.e preparation of surfaces,application of primer,application of first coat. application of second coat will be got passed from Engr-in-Charge (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item

M&L for preparation of wall and and applying 2mm thick Acrylic / water proofing wall putty in two coats (each coat not less than 1mm thick ) and surface finished even and smooth with sand paper complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the primeses complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specified complete all as specified and directed.

Dismantling of Asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and as directed.

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick in nominal mix of PCC (1:4:8) with approved quality of stone metal, clean coarse sand including Mixing, laying, placing and vibrating with plate vibrator as in foundation or bases of interlocking paver block filling complete all as specified and directed.

M&L for sand filling under floor including waterring and consolidaion complete all as specified and directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) with grey cement and pigment, M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand complete all as specified and as directed.

M&L for cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) as in coping, benching, kerb and levelling course, roof padding etc complete all as specified and directed.

M&L for scratch free, doubly charged, vitrified ceramic tiles 9 to 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. Make of tile : Superior quality tiles from Kajaria/Somany/Orient Tiles / make as per Particular Specification.

All as per item No 57.00 above but as in skirting/ dado etc over and including 10 mm thick backing coat on fair faces of brick work in CM (1:6).

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size not less than 450x300x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10 mm thick backing coat on fair faces of brick work in CM (1:6) complete all as specified and as directed.

M&L for machine cut kota stone slab in flooring 20mm to 25mm thick laid over and including 15mm thick screed bed in cement mortar 1:6 and pointed with cement mixed with pigment to match with the shade of slab including rubbing and polishing complete all as specified and as directed.

Cutting and mirror polishing of exixting kota stone flooring as per the direction given by Engr in Charge.

M&L for 18-20 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete all as specified and directed.

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete including special shape all as specified and as directed.

S&F mild steel Hollow Section work in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete incl special shape all as specified and as directed.

M&L for 75mm thick cement concrete 1:3:6 type C1, with using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.

Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs complete all as specified and as directed.

S&F PVC Ceiling Lining (False Ceiling) complete including complete frame work for PVC Ceiling consisting of 5mm thick Plain colour PVC sheet 8 to 10 mm hollow section inclusive of solvent cement and fixing at site on frame work as per requirement on site complete all as specified and as directed.

S&F anodised aluminium snap grid of 605mmx605mm size frame work for false ceiling with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L for exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid frame work complete all as specified and as directed. Note: Grid frame work shall be measured and paid separately under relevant item.

Taking up or down steel tubing and connections for bore of tube 15 mm, complete all as specified and directed.

Taking up or down steel tubing and connections for bore of tube 20 mm, complete all as specified and directed.

S&F 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,complete all as specified and as directed.

All as per item No 74.00 above but 20mm bore.

S&F in repairs rotational moulded polyethylene water storage tank 500 liters capacity (cylidrical vertical with closed top) of two layer hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed.

All as per item No 76.00 above but capacity 1000 Litre

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc and hoisting if required and re-fixing in position exc 500 & n. exc 1000 litres capacity complete all as specified and as directed.

S&F in repairs long body CP Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and as directed.

S&F in repairs fancy type chromium plated15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed .

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and as directed.

S&F in repairs health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F CP toilet paper holder complete all as specified and as directed.

S&F in repairs Vitreous China wash basin, angle back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets including 32mm brass CP waste coupling complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

S&F 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F in repairs 40mm Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed.

S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair 125 mm size chromium plated shower rose with siwel joint and arm not less than 20cm long suitable for 15 mm bore GI pipes complete all as specified and directed.

S&F reinforced concrete pipes, class NP-2 laid and jointed with collars of 300 mm bore of pipe complete all as specified and directed.

M&L PCC 1:3:6, Type C2 inConcrete bed to drain pipes NP2 ,300mm dia including packing under, and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed.

Cutting into existing manhole for connecting new drains making good to pipe and rendering cutting out existing benching for and ternning branch channel (1/2 round as 3/3 section) in cement concrete type B-1 1:2:4 smoth finished and benching as required for 150 mm pipe complete all as specified and directed.

S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 20mm-210 gms) complete all as specified and as directed

M&L for RCC Nominal Mix using 20 mm graded stone aggregate as in beams, bands, cantilvers, bressummers, linters,tank platform, chajjas, etc over 1.5m span etc complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping), etc fair finished surface complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified and directed.

S&F mild steel TMT bars 5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders complete all as specified and directed.

S&F mild steel TMT bars 6mm to 8mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cespits, manholes pier hold, cable etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil, complete all as specified and directed.

M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing, sub base of floor, etc complete all as specified and directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finished fair complete all as specified and directed

M&L for RCC M-20 (Nominal mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 Cm in hard/dense soil complete all as specified and directed.

Removing excavated material (soil) to a distance not. exc. 50 mtr and depositing where directed at a level nexc 1.5 mtr above the starting point.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions finished fair complete all as specified and directed

M&L for RCC M-20 (Nominal Mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Formwork to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, etc for fair finish surfacecs complete all as specified and directed

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L for RCC M-20 (Nominal Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified and directed

M&L for moorum / red bajri filling in floors or pavings, laid in layers nexc 15cm thick, spread, levelled and rammed including waterring and consolidation complete all as specified and directed.

M&L for rendering 5mm thick in ceiling CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

S&F curtain rails 20 mm dia, decorative type, stainless steel including fixing brackets in both sides fancy type complete all as specified and directed..

S&F aluminium coloured power coated door shutters, aluminium section weighing min 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. .

S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed.

M&L for preparation of newly/old plastered or concrete celling sufaces incuding preparation of surfaces and applying three coats of white washing complete all as specified and directed.

M&L for 80mm thick machine pressed precast concrete interlocking paver block (glossy finish) with grey cement and pigment, M-40 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand complete all as specified and as directed.

S&F factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement all as specified and directed. Note: WPC shall be measured and paid separately under respective item.

M&L for providing water proofing roof treatment complete with polymeric standard water proofing membrane, Aqua flex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd / Hyperplas manufactured by IWL Ltd with 10 years guarantee for water tightness complete all as specified as under and all as per Manufacturer's instructions :- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 grade @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufacturer's specification complete all as specified and directed. (b) Supply & laying water proofing APP polymeric membrane 3mm thick and 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100 micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) Applying one coat of polymeric modified bitumen 85/25 grade @ 1.2Kg/Sqm over APP membrane (d) Applying two coats of Aluminium bituminous paint @ 0.15 Kg/Sqm over the APP membrane surface. NOTE:- Application of water proofing treatment shall be executed through expert team of manufacturers or their authorised applicator

S&F Rotational moulded Polyethylene water storage tank 1000 litre capacity (cylidrical vertical with closed top) of two layer hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed.

S&F CP pillar taps (swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.

S&F CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified

S&F fancy type chromium plated15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed.

S&F vitreous china wash down water closet pedestal pattern white including flushing cistern and flush pipes complete all as specified and as directed .

S&F health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed.

S&F vitreous china wash basin white (oval shaped under counter) of size 550 x 400mm including 32mm brass CP waste coupling complete all as specified and as directed .

S&F vitreous china urinal bowl urinal flat back, size of 465x355x265mm white (min)with grating and union for discharge pipe, urinal spreader with waste pipe and all fitting for urinal.complete all as specified and as directed

S&F urinal spreader for fixing with 15mm bore pipe complete all as specified and directed.

S&F PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.

S&F 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F for 40mm Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 20mm-210 gms) complete all as specified and as directed

M&L for SGSW drain pipe of 150mm internal dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed including demolition and breaking up drain pipe any type and any discription and removing the debris including concrete bed and haunching from the trenches complete all as specified and directed.

M&L for PCC (1:3:6) type C -2 as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested internal dia of pipe 150mm with specified bedding thickness, etc complete all as specified and directed .

M&L for RCC type B-1, 1:2:4 (20 mm graded stone aggregate) in precast as in small coverslab,manholes and soak well cover slab etc set in cement mortar (1:4) etc with and incl necessary form works as directed and fixed complete all as specified and directe.(Note:-Reinforcement shall be measured & paid separately).

M&L for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (Using 20mm graded agg) as in coping etc including necesarry form works complete all as specified and as directed.

Extra for forming fiar finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds,mitred/stopped ends etc complete all as specified and directed.

S&F reinforced concrete pipes, class NP-2 laid and jointed with collars of 450 mm bore of pipe complete all as specified and directed.

M&L PCC 1:3:6, Type C2 inConcrete bed to drain pipes NP2 ,450mm dia including packing under, and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed.

M&L for preparation of plastered or plastered surfaces of walls and applying two coats cement base paint, white or tinted on new surfaces of walls including washing floors, cleaning glass, joinery, electrical fittings, wiring etc, of drops and splashes complete all as specified and directed.

M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:6) including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 100mm thick cement concrete, type B- 2, 1:2:4 (40mm graded aggregate) complete all as specified and as directed

S&F 2nd class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F 0.50mm thick plain (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

S&F Mild steel plates (Plain or chequered) as in shoe plate, base plate and gusset plates forming holes for roof frame work, trusses, rafters etc of grade Fe 410 WA. complete all as specified and as directed

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface etc complete.

M&L for PCC 1:2:4 type B2 using 40 mm graded aggregate as in foundation filling, mass concrete for post etc complete all as specified and directed.

M&L chequered grey cement concrete tiles with gray cement & no pigment of size 25cm x 25cm x 25mm thick set jointed and pointed in neat cement slurry in floor over and including 15mm thick screed bed or bedding layer of CM (1:4) for laying floor finishes complete all as specified and directed.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc. complete all as specified and directed.

Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site.

M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC FRLSH concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light /fan /bell point controlled by one, one way switch 5 Amps

(b) One 3 point 5 Amps switch socket outlet point controlled by one switch on same board with other switch

(c) One 3 point 5 Amps switch socket outlet point controlled by one switch on Independent board.

All as per item No 177.00 above but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point on independent board including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

All as per item No 177.00 above but but using 4.0 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for geyser point/AC point connecting to metal plug and socket DB incl necessary running of 4.0 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC point)

S&F Modular Switch , single pole, one way, and 5/6 Amp single module complete all as specified.

S&F Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module complete all as specified.

S&F Modular Switch , single pole, one way, and 15/16 Amp single module complete all as specified.

S&F Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module complete all as specified.

S&F stepped type electronic fan regulator flushType complete all as specified and directed at site.

S&F lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings

S&F ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S&F in repairs LED luminaire 600 mm x 600 mm square LED panel 35/36 watts, 220 volts, lumen efficacy of 120 lumens/watt, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer- in-Charge. Make:-Havells/ Wipro/Philips/ Bajaj /make as specifed in Particular Specifications.

S&F in repairs integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes including taking down the existing complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or equivalent in Wipro / make as specifed in Particular Specifications.

S&F in repairs LED light fitting 2 feet 10 watts, 6500K batten aluminium extruded with end caps complete all as specified and as directed. Make:-Cat No LHEXACP7IN1W010 of Havells/equivalent make in / Wipro/Philips/ make as specifed in Particular Specifications.

S&F Highly efficient LED Bulbs, 10 watts in B-22 cap complete all as specified and directed. Make:-Havells/ Wipro/Philips/ Bajaj /make as specifed in Particular Specifications.

S&F in repairs Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm dia medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make:-Cat No ENXT P 36L WH CR PC SD of Bajaj or equivalent make in Philips, Wipro/Havells / make as specifed in Particular Specifications.

M&L for sub main wiring with 02 runs of 4 sqmm main wire along with 01 run of 04 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. Make of cable - Havells / Finolex / RR Kabel Ltd. / L&T / make as specifed in Particular Specifications. Make of PVC Conduit( FRLS) - Presto Plast / Finolex / Jindal / Asian / AKG

M&L for sub main wiring with 02 runs of 6 sqmm main wire along with 01 run of 06 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. Make of cable - Havells / Finolex / RR Kabel Ltd. / L&T / make as specifed in Particular Specifications. Make of PVC Conduit( FRLS) - Presto Plast / Finolex / Jindal / Asian / AKG

S&F double door SPN DBs 08 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge.

S&F MCB SPN 6 to 32 amps 10 KA, 'c' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'c' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.

S&F metal clad box suitable for 230 volt 50 Hz for AC connection three pin and socket with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed

Labour only for refixing the celing fan/ Exhaust fan including replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.

S&F aluminium strip of size 25x3.15 mm for Earth continuity conductor or main earthing lead fixed to wall/ roof with saddles and fixing screws etc. for roof conductors and down conductors above ground or any other indicated situation complete all as specified and directed. Note:- Two lengths of strips shall be jointed together by overlapping not less than 100 mm both ends through welding/brazing

S&F GI strip of size 32x6 mm for Earth continuity conductor or main earthing lead fixed wall with saddles and fixing screws etc. or laid underground as in grid connection of earthing complete all as specified and directed. Note:- Two lengths of strips shall be jointed together by overlapping not less than 100 mm both ends through welding/brazing.

S&F single pointed termination aluminium rod 12 mm dia, 300 mm long on roof top including fixing/fitting of termination rod and over the roof in PCC block/GI pipe and making connection with roof/down conductor with Al strip by proper bolting/brazing etc complete all as specified and directed. Note : GI pipe shall be measured and paid separately under respective item of sch.

M&L for Earthing complete (in replacement) with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.50m below normal ground level connect to galvanised earth strip 32x6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 m length including connected to earth plate including necessary excavation & earthwork, etc complete all as shown in electrical plate No 3, connected to earthing test point complete including testing on completion complete all as specified and directed.

M&L for Earthing complete (in replacement) with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, etc complete all as shown in electrical plate No 3, connected to earthing test point complete including testing on completion complete all as specified and directed.

S&F 40 mm bore tubing, light grade,galvanised, with all fitting,screwed,and fixed complete to walls/ceilings and laid in floors for earthing strip protection/ fixing of air terminator rod including taking out old pipe complete all as specified & directed.

M&L in replacement for test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex.head screw complete all as specified and directed by Engineer-in-Charge.

Taking down existing old extg unserviceable LT UG/ service cable of any description and size complete all as specified and directed.

Supply, laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size 3.5 core x 35 Sqmm complete all as specified and directed

Supply, laying and jointing GI pipe 'light grade' 50 mm bore in trenches/under floors or roads/ along poles/ on wall including clamps for protection of cables fittings fittings complete all as specified and directed.

M&L for clean and dry sand (un-washed) in trenches incl spreading and levelling for cushioning of UG cable complete all specified and directed.

M&L for bricks flyash brick , modular size , best quality, locally available , laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection complete all as specified and as directed.

S&F integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or equivalent in Wipro / make as specifed in Particular Specifications.

S&F integrated LED tube light fitting 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square box complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7IN1W009 Bajaj Cat Pt No. BCLSB 10 WH or equivalent in Wipro / make as specifed in Particular Specifications.

S&F LED street light fittings 1x35 Watt, 5700K complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 /66protection fixed on and including sufficient length and appropriate size GI bracket with all accessories duly connection with three core flexible copper cable complete all as specified and directed. Make:- Havells Cat No.LHEXAYP7PN6K030 Crompton Cat No. LSTO-25-CDL, Bajaj Cat No. BCLST 25W LED IV2 or equivalent in Wipro / make as specifed in Particular Specifications.

S&F MCB TPN 40 to 100 amps 10 KA, c-series including connection with suitable size aluminium/copper lugs complete all as specified and directed by Engr-in-Charge.

S&F Exhaust fan 250mm sweep, AC single phase 230 Volts, non metallic type, complete with louver including electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc including making hole of appropriate size in the existing brick wall and making good the disturbed wall and matching with the existing surface of wall complete all as specified and directed by Engr-in-Charge. Make : Havells Model: Ventil Air-DX white or equivalent in /Bajaj/Crompton / make as specifed in Particular Specifications.

Goyal Construction (BID ID -3256696)

ss construction (BID ID -3261347)

M/S Parikshit Sharma (BID ID -3257566)