Repair to joineries/flooring and plumbing works and certain repair to roof sheeting and joinery work and transformer fencing to electric supply installations under GE(Utilities) Udhampur

Amount

Taking down chowkat or frames with shutters (without taking off shutters from the frames) are not exceeding 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description area exceeding 1.00 Sqm and not exceeding 2.00 Sqm each and removing from site, complete all as specified and directed by Engr-in-Charge.

Powder coated (of approved color) aluminium sliding window of any shade with frame of section 100mm x 45mm , thickness of sheet 16 gauge , including sliding shutter with shutter of section 32mm x 15mm (with and including Triple Track and 2 Nos Glazed Shutter and 01 No Gauzed Shutter) including Stainless Steel wire mesh, rubber gasket for securing the glass, 4 mm thick Tinted glass and necessary aluminium mongry and handles, locks complete all as specified and as directed by Engr-in-Charge.

Powder coated (of approved color) aluminium door frame of any shade with shutter of section 100mmx 45mm, thickness of sheet 3mm , partly panelled shutter and partly glazed lock rail / bottom rail of shutter 100mm x 45mm, top rail 80mm x 45mm including necessary jointing cleats, anodized aluminium including necessary fittings and aluminium mongry i.e. 200mm long two Nos aluminium handles, 02 No, 200mm long aluminium tower bolt in each leaf, rubber gasket for securing the glass and 3 Nos 100 mm long butt hinges with each including 5 mm thick tinted glass and 12 mm thick Prelaminated Particle Board including mortice lock, hydraulic door closure to each shutter complete all as specified and as directed by Engr-in-Charge.

Aluminium (Diecast) body Door closer (in repair) hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified and directed by Engr-in-Charge.

Double action floor spring (in repair) hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-Charge.

Factory Made PVC Moulded Door Shutter of wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, fix in frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam wall nut colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing, complete all as specified and as directed by Engr-in-Charge.

Factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc all as specified and as directed by Engr-in-Charge.

2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick, open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc all as specified and as directed by Engr-in-Charge.

Stainless steel wire cloth cut to size, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed by Engr-in-Charge.

Mild steel, sliding door bolt, plate type, 300 mm long, stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engr-in-Charge.

100mm size aluminium butt hinges complete all as specified and directed by Engr-in-Charge. Make : ISI Marked.

150 mm size, aluminium handles, cast type, anodised complete all as specified and directed by Engr-in-Charge.

200mm Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engr-in-Charge.

100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed by Engr-in-Charge.

Steel window (box type) factory made with side hung shutter including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed by Engr-in-Charge. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3. (ii) MS fillets, glazing wire gauge shall be measured and paid seprately.

All as per item No 17.00 here-in-before but without glazing bar complete all as specified and directed by Engr-in-charge. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 sheet 1/3 to 3/3. (ii) MS fillets, glazing, wire gauge shall be measured and paid seprately.

Factory made mild steel ventilators, box type with upper top hung shutter and bottom fixed type shutters including pintol hinges and ,steel peg stay and one shop coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and directed by Engr-in-Charge.

3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane fixing in glass any height/ any stories without any financial effect complete all as specified and directed by Engr-in-Charge.

4mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge.

Preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.

Preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engr-in-Charge.

Mild steel framed work such as grills, gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar works, conforming to Fe-290, Gde E-165, complete all as specified and directed by Engr-in-Charge.

Demolition of PCC in ground floors & pavings not exceeding 15 cm thickness below or above ground level, unreinforced and removing the rubbish out side MD land complete all as specified and directed by Engr-in-Charge.

Providing 50 mm thick cement concrete, M-10(1:3:6), type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Machine pressed precast concrete interlocking pavor block 50% grey and 50% coloured, any shape and size, conforming to IS 15658-2006 of 60mm thicknes, M-35 over and including 75mm thick PCC, type D-2, M-7.5(1:4:8) and 25mm thick sand cushion complete all as specified and directed by Engr-in-Charge.

Coloured Chequered cement concrete tiles of size 25 cm x 25 cm x 22 mm thick, set, jointed and pointed in neat cement slurry (with grey cement and pigment) as in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Vitrified ceramic tiles 10 mm thick Double charged (sq/Rectangular) polished,area of each tiles exc 0.36 sqm but not exceeding 0.42Sqm ,in Floors etc.set and jointed in neat cement slurry over 15 mm thick screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge.

All as per serial item No 31.00 here-in-before but as in skirting over vertical surfaces & including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified and directed by Engr-in-Charge.

Non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 33.00 here-in-before but on skirting over vertical surfaces & including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified and directed by Engr-in-Charge.

Granite (of any type) 18 mm to 20 mm thick work (table rubbed & polished) as in steps, jambs, pillars, window cills, cooking platforms and like ,machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over & including 20 mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Angle valves (in repair)cast copper alloy, 15 mm, screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-Charge.

15mm dia stop cock (in repair) fancy type, chromium plated complete all as specified and directed by Engr-in-Charge.

Bib tap (in repair) 15mm bore, fancy type, chromium plated complete all as specified and directed by Engr-in-Charge.

Bib cock, 15mm bore, fancy type, long body chromium plated (in repair) complete all as specified and directed by Engr-in-Charge.

Pillar taps (in repair), cast copper alloy, with capstan heads , chromium plated , screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm complete all as specified and directed by Engr-in-Charge.

Taking up or down steel water tubing with connections for cleaning for refixing or removing to storeyard complete of bore 15mm complete all as specified and directed by Engr-in-Charge.

Steel water tubing, medium grade, galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm complete all as specified and directed by Engr-in-Charge.

Fixing only Steel water tubing, 15mm dia, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

Stainless steel grating doom 100/150mm dia with or without hole (in repair) complete all as specified and directed by Engr-in-Charge.

32/40 mm dia and 750mm long PVC waste pipe for WHB/sink (in repair) complete all as specified and directed by Engr-in-Charge.

Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, (fixed in repair) complete all as specified and directed by Engr-in-Charge. Make : Jaquar, Cat part No. SOL-6169B/Cera- QTF 2006461 or equivalent makes as specified in list of makes.

Sink wall mixer, brass, chromium plated, fancy type, with capstan head handles screwed down high pressure, with lettered 'hot' and 'cold', including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, (fixed in repair) complete all as specified and directed. Make : Jaquar Cat part No. CON-309KN, Cera- F 2007501or any equivalent makes as specified in list of makes.

Rotational moulded polyethylene water storage tank (in repair) 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections including 20mm bore ball valve brass with polyethylene float and fly nut and tank nipples including dismantling existing unserviceable water tank of any capacity and removing from site, complete all as specified and directe by Engr-in-Charge.

Rotational moulded polyethylene water storage tank (in repair) 1000 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections including 20mm bore ball valve brass with polyethylene float and fly nut and tank nipples including dismantling existing unserviceable water tank of any capacity and removing from site, complete all as specified by Engr-in-Charge.

Corner Glass self ( With CP brackets) 225 x 225 mm complete all as specified and directed by Engr-in-Charge. Make-Jaquar cat part No. CAN-1173/ Cera- F 5005102 or equivalent of makes specified in PS.

Vitreous china wash hand basin (in repair) white, flat back, size 580x450mm including waste chain and plug and porcelain stopper but including bracket, CP waste coupling & waste pipe fixed in repair complete all as specified and directed by Engr-in-Charge.

Soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass chromium plated screws, fixed in repair complete all as specified and directed by Engr-in-Charge. Make : Jaquar, Cera- cat No. F 5007106 or equivalent of makes of specified in P.S.

10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends (fixed in repair), complete all as specified and directed by Engr-in-Charge.

Cast Iron floor trap with dia of outlet 75mm with CI grating including jointing to waste pipe fixed in cement concrete PCC, 1:2:4, type B-1 complete all as specified and directed by Engr-in-Charge.

PVC connection (in repair), 15mm size with PTMT nuts and washers for both ends of length 450mm complete all as specified and directed by Engr-in-Charge.

Rolled mild steel work of angle iron as in frames of doors & Cup Board etc conforming to grade Fe 410-O or Fe-310-O complete all as specified and directed by Engr-in-Charge.

18/19 mm thick prelaminated particle board (in repair) bothsides with decorative choice laminations, grade-2 quality, interior grade, commercial type, fixed with screws as in shelves and shutters of cup board exposed face fixed with 20x6mm thick teak wood beading complete all as specified and directed by Engr-in-Charge.

Mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 30mm, complete all as specified and directed by Engr-in-Charge.

100 mm long, aluminium anodised, hasp and staple complete all as specified and directed by Engr-in-Charge.

100 mm long, aluminium anodised hasp and staple (in repair) complete all as specified and directed by Engr-in-Charge.

2nd class soft wood beads, straight (any size) for glazed or gauzed joinery, renewed, including miters etc complete all as specified and directed by Engr-in-Charge.

Powder coated mild steel conduit pipe 25mm bore (Drapery rod) with a pair of PVC coated MS clamps to hold drapary rod and decorative attachment at both ends of drapary rod, fixed to opening of door/windows, (fixed in repair) with a pair of clamps and a pair of side ornamental attachments), complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed by Engr-in-Charge.

Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

All as per item No 65.00 here-in-before but except bricks, complete all as specified and directed by Engr-in-Charge. Note : Old unserviceable bricks obtained against demolition shall be re-used.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge.

Rolled mild steel work as in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe-420 W(Gde-E-50) quality-A, steel work duly painted with one shop coat of zinc chromate primer including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and directed by Engr-in-Charge.

Factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames including shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4 Sqm each and removing from site, complete all as specified and directed by Engr-in-Charge.

Taking down and refixing shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each in same opening, complete all as specified and directed by Engr-in-Charge.

200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed by Engr-in-Charge.

150 mm long mild pressed steel handle (in repair), oval type, stove enameled black complete all as specified and directed by Engr-in-Charge.

Mild steel, sliding door bolt, plate type, 250 mm long, stove enameled, black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engr-in-Charge.

Plain cement concrete, M-10(1:3:6) type C-0 (using 12.5mm graded crushed stone aggregates) for filling in the pressed steel door frame/hold fast complete all as specified and directed by Engr-in-Charge.

Stainless steel wire cloth (in repair), 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel staple complete all as specified and directed by Engr-in-Charge.

Expanded metal, weight exceeding 4.00kg per sqm cut to length, bent to shape and welded with MS angle iron frame, complete all as specified and directed by Engr-in-Charge.

Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed by Engr-in-Charge.

Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed by Engr-in-Charge.

Dismantling Asbestos cement (corrugated,semi corrugated, etc) sheets in roof coverings complete all as specified and directed by Engr-in-Charge.

6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type of cranked hook bolts complete all as specified and directed by Engr-in-Charge.

All as per serial item No 82.00 here-in-before but except sheets.

Asbestos cement sheet,one piece plain angular ridge, 6mm thick, fixed with L-type or J-type or cranked hook bolts complete all as specified and directed by Engr-in-Charge.

Bitumastic gola, with 80/25 bitumen and coarse sand mixture 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed by Engr-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-Charge.

Prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Prepainted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Glazed ceramic coloured tiles 450mm x 350mm x 7mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, jointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engr-in-Charge.

5 mm thick rendering on fair faces of brick or stone/concrete surfaces in cement mortar 1:4 and finished surface even and smooth without using extra cement with water proofing compound complete all as specified and directed by Engr-in-Charge. (WPC shall be measured separtely)

15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

10 mm thick rendering on fair faces of brick /concrete surfaces as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Applying two coat of oil bound distemper on walls after preparation of newly plastered surfaces over a coat of white primer, complete all as specified and directed by Engr-in-Charge.

Applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed by Engr-in-Charge.

Applying two coats of cement base paint on walls after preparation of newly plastered surfaces over a coat of white primer, complete all as specified and directed by Engr-in-Charge.

Precast cement concrete jallies 25mm thick (measured solid set in cement mortar 1:4 incl all moulding and necessry form work, complete all as specified and directed by Engr-in-Charge.

Repairs to existing steel rolling shutters without ball bearing by taking down top cover, anchoring rod, spring etc and providing new springs and anchoring rod, replacing the worn out strips, safety lever lock of shutters and welding of handle, hasp staple and other broken articles etc, greasing the spring, guide rail, shaft etc and making functional and errecting in position, including refixing of top cover/hood etc, and refixing in same opening and making good in CM 1:3/PCC to match the existing surface, opening n.exc. 10 sqm each and finally painting with two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/Sqm including 20mm thick screeding in CM (1:3) finished even and smooth mixed with water proofing compound complete all as specified and directed by Engr-in-Charge. (WPC shall be measured and paid separately)

Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and laying 3mm thick polymeric waterproofing membrane of 3.5 Kg/Sqm and bonded completely to the surfaces with overlap of 10 cms( with torch application) and overlaps are to be sealed by flame torch and applying one coat of IWL Aluminium paint complete all as specified and directed by Engr-in-Charge. Make: STP/IWL

Vitreous china squatling pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVS (SWR) 'S' trap, provn of lime concrete and jointing to flush pipe (fixed in repair), complete all as specified and directed by Engr-in-Charge.

Supply only integral water proofing compound as per latest IS specification complete all as specified and directed by Engr-in-Charge.

Stainless steel grating doom(in repair) 100/150mm dia with or without hole complete all as specified and directed by Engr-in-Charge.

Preparation of old plastered/unplastered wall surfaces and applying one coat of cement base paint white or tinted, complete all as specified and directed by Engr-in-Charge.

Peparation of old plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted, complete all as specified and directed by Engr-in-Charge.

Preparation of old painted wooden surcaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enammel paint, complete all as specified and directed by Engr-in-Charge.

Flush shutters, solid core construction, with block block board core and plywood face panels, commercial type on both sides, 40mm thick complete including fixing only iron mongery such as tower bolt, handle, hinges, aldrop bolt etc., complete all as specified and directed by Engr-in-Charge.

Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enammel paint, complete all as specified and directed by Engr-in-Charge.

75mm thick , Plain cement concrete, (Nominal Mix), Type C-2, M-10(1:3:6) (using 40mm graded crushed stone aggregates) as in floors finished rough surface to receive floor finishes, complete all as specified and directed by Engr-in-Charge.

ATUL TRADING CO

SODHI TRADING CORPORATION

RAMAN KUMAR

khajuria builders

RAJ MOHD

MOHAN LAL AND SONS

M/S ASHOK KUMAR PACHIALA

RAMAN CONSTRUCTION CO