Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.3 LAccepted-AOC FLAT NO B 401 4TH FLOOR NAVADURGA CO OP HSG SOCIETY LTD PLOT NO 7 SECTOR 19A NERUR EAST NAVI MUMBAI THANE MAHARASHTRA 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC AOC | |
| 2 | L2₹44.3 L+₹6.3 L (16.6%)Rejected-Finance GARDEN AVENUE PLOT NO 242 243 244 RH 4 SECTOR 21 NERUL NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹44.4 L+₹6.5 L (17.0%)Rejected-Finance FLAT NO 002 MAHAVIR VILLA CHS LTD PLOT NO 259 SECTOR 21 NERUL EAST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹46.9 L+₹9.0 L (23.6%)Rejected-Finance SIDDHARTH CO 24 PADMAVATI SOCIETY VALLABH NAGAR BHURAVAV GODHRA GUJARAT 389001 | PANCH MAHALS | GUJARAT | 389001 | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹48.3 L+₹10.3 L (27.1%)Rejected-Finance | L5 | Rejected-Finance Being other than lowest |
Tender Value
₹59 L
EMD Value
₹1.1 L
Closing Date
12 Mar 2020, 6:00 pmClosed
CWE NW MUMBAI
DR HOMI BHABHA NAVY NAGAR ROAD COLABA MUMBAI
REPAIR AND MAINT OF FENCING BOUNDARY WALL HARD STANDING PATH ETC IN ND MB UNDER AGE B R I UNDER GE NW KUNJALI
2020_MES_320676_1
8345/CWE(NW)/MUMBAI
Open Tender
Civil Works
Item Wise
270 days
GE NW KUNJALI
Class C and Category a (i)
9 documents required · 9 mandatory
₹1,000
Yes
GE NW KUNJALI
₹1.1 L
Yes
27 Apr 2020
31 Jan 2020
14 Mar 2020
31 Jan 2020
12 Mar 2020
27 Feb 2020
31 Jan 2020 - 20 Feb 2020
Amount
Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed.
Material & labour for brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed
Supply & fix in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and strained and fixing to any type of standard rails straining bolts, etc. all as directed.1 each line wire to be measured)
Supply & fix wire barbed tape concertina coil wire of 50 turn having core wire of high carbon spring steel of high tensile strength and a carbon steel strip of 20mm width, 0.5mm thick having razor sharp barbs punched tape and core wire hot dip galvanized, as fixed in repair.
Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.
Material & labour for Chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry in floors with in equal proportions & pigments with red and yellow colour over including 20mm thick screed bed in CM 1:6 complete all as specified and directed
Material & labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 80mm thickness with grey cement and pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed.
Material & labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 60mm thickness with grey cement and pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed.
Material & labour for PCC 1:2:4 type B1 using (20 mm graded aggregate) as in kerbing all around of tile complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for drain in hard/dense soil complete all as specified and as directed
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm with soils complete all as specified and directed.
Removing excavated surplus soil exc 250m but not exceeding 500m deposiitng where directed at a level not exec 1.5m above the starting point
Dismantling of cast iron or reinforced concrete drain pipes , jointed in cement mortar and taking out of trenches, if required of folloiwn sizes :-
(a) 600mm dia
(b) 300mm dia
(c) 150mm dia
Material & labour for Reinforced concrete pipes 600mm dia , class NP2, laid and jointed complete with collars complete all as specified and directed.
Material & labour for Reinforced concrete pipes 300mm dia , class NP2, laid and jointed complete with collars complete all as specified and directed.
Material & labour for Reinforced concrete pipes 150mm dia , class NP2, laid and jointed complete with collars complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed
Supply & fix mild steel works as in doors or gates of angle or other sectons with gusset plates,plates (plain or chequered) channels, rails, braces etc complete drilled, welded etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed
Framed work such as grills, gratings, sun shed etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars, barred iron doors, ladders, farmed balastures, walk ways, railings, frame work of water tanks and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.
Material & labour for preparing new or previously untreated surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. .
Demolition of cement concrete in ground floor and paving exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. .
Material & labour for PCC 1:4:8 type D2 using (40mm graded stone aggregate) as in foundations, fillings & mass concrete etc all as specified and directed.
Material & labour for cement concrete 1:2:4 type B2 (using 40mm graded stone aggretate) as in surface channel or drain complete all as specified and directed.
Material & labour for PCC (1:3:6) type C1 using 20mm graded stone aggregate in coping bed black etc including necessary form work complete all as specified and directed.
Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified.
Material & labour for rendering minimum 20mm thick ready mix mortar in one coat with and including curing as per manufacturer's instruction complete all as specified and as directed
Material & labour for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer on wall/roof complete all as specified and directed
Demolition of reinforced (reinforcement cut as required to facilitate demolition) cement concrete in ground floors and paving not exceeding 15 cm thickness( below or above ground level) all as directed.
Material & labour for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) setin cement mortar (1:6) work for landings, cover slabs, manholes, chajjas, water troughs, manger shleves and similar articles with plain faces complete all as specified and as directed
Material & labour for mild steel TMT bars 6 to 8mm dia and over cut to length bent shape as required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S complete all as specified and as directed
Material & labour for PCC of type D2, 1:4:8 using (40mm graded stone aggregate) 100mm thick as in sub base complete all as specified and directed.
Material & labour for PCC 1:2:4 type B2 using (40mm graded aggregate), 100mm thick as in flooring.
Material & labour PCC 1:3:6, type C2 (using 40 mm graded agg) 75 mm thick as in plinth protection complete all as specified and directed.
Material & labour for finishing concrete road, pavement with brooming all as specified and as directed
Forming contraction (Dummy) joints 65mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and as directed
Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories).
Supply & fix 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
Supply & fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
Supply & fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
Supply & fix for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed
Supply & fix for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed
Supply & fix for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed
Dismantling fencing wire mesh, any type all as specified and directed
Supply & fix mild steel security chain link fencing 60mm x 60mm mesh made out of 3mm dia MS wire and 1.00mm thick PVC coating throughout fixed to RCC post including binding wire complete all as specified and directed
Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion in concrete complete all as specified and directed.
Supply & fix mild steel works as in fencing, posts & struts in fencing embedded in stone masonry/bricks works including cutting tops to shape as directed, drilled holes notching for wires flat iron fillets (for securing wire mesh etc) inlcuding all drilling, bolting or riveting etc and similar work conforming to Fe-410 or Fe-310-0 complete all as specified an directed
Supply & fix mild steel round bars 10mm dia and over, in horizontal support for chain link straining of fencing including cut to length, bent to shape required including cranking, bending spirally for hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) complete all as specified and directed.
Supply & fix mild steel screw bolts 10mm dia with hexagonal or square heads at one end and screwed at other ends dia of shank 5 to 10 mm and length of bolt exc. 5cm but not exceeding 10cm complete all as specified and directed.
Material & labour for Granite tile of 20mm thick in vertical surfaces such as dado, skirting, steps / risers, machine cut bedded and jointed with grey white cement slurry and pointed with white cement with add mixture of pigment to match the shade of granite stone including cutting, grinding and polishing and including 15mm thick backing coat in CM (1:4) complete all as specified and directed.
Material & labour for cleaning of covered drain of sectional area by using suitable device for removing blockage of line, mud, sit and other debris and removal of obtained spoils outside MD land including taking precautionary and safety measures etc complete all as specified and directed
M/s S.D Construction Co
RAJENDRA CONSTRUCTION
siddharth and company
SUNRISE CONSTRUCTION CO
Nilesh Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .