DEFPROC

Active

Works

Civil Works

REPAIRMAINT OF WATER SUPPLY SYSTEM AND REPAIRMAINT OF CENTRIFUGAL SUBMERSIBLE PUMP SETS INCLUDING CONNECTED WORKS AT ROWRIAH SARAIBARI AND BHALUKMARA UNDER GE JORHAT

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

GE JORHAT | Jorhat, Assam

Amount: ₹28 LCloses: 15 Oct 2026

Timeline

Published24 Sept 2026
Submission Opens8 Oct 2026
Closes15 Oct 2026
Bid Opening19 Oct 2026

Tender Value

₹28 L

EMD Value

₹56,000

Closing Date

15 Oct 2026, 9:00 am

Tender Inviting Organisation

Name

GARRISON ENGINEER JORHAT

Address

GARRISON ENGINEER JORHAT

Work Description

REPAIRMAINT OF WATER SUPPLY SYSTEM AND REPAIRMAINT OF CENTRIFUGAL SUBMERSIBLE PUMP SETS INCLUDING CONNECTED WORKS AT ROWRIAH SARAIBARI AND BHALUKMARA UNDER GE JORHAT

Tender Information

Tender ID

2026_MES_791032_1

Reference Number

8364/GE/E8

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

180 days

Location

GE JORHAT

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredApplication for tender on firms letter head (.pdf)

RequiredList of residual work in hand with CA Amount present progress as per Note No-1 of Appx-A of NIT (.pdf)

RequiredEnlistment letter issued by the Registering Authority duly renewal or one time verification E Class (.pdf)

RequiredScanned copy of DD toward cost of tender cost of tender and EMD Instrument in case SSD bond signed (.pdf)

RequiredScanned copy of all documents for Un-enlisted in MES bidder as mentioned in Para-5 of Appx-A NIT (.pdf)

RequiredScanned copy of GST register cert (.pdf)

Finance

RequiredQuoted BOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

GARRISON ENGINEER JORHAT

EMD Fee Amount

₹56,000

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

24 Sept 2026

Published

24 Sept 2026

Bid Opening

19 Oct 2026

Download Starts

24 Sept 2026

Download Ends

15 Oct 2026

Submission Starts

8 Oct 2026

Clarification Period

24 Sept 2026 - 1 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (115 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundations or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10Sqm on plan and not exceeding 1.50m in depth and getting out in soft/loose soil complete all as specified and as directed.	102.5	Cum	-	-
2	Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm on soft/loose soil complete all as specified and as directed.	82.24	Cum	-	-
3	Removing excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.	20.26	Cum	-	-
4	Supply and laying galvanized steel tubing, medium grade, 100 mm bore with all fittings, laid in trenches including taking up old GI pipe complete all as specified and as directed.	40	RM	-	-
5	Supply and laying galvanized steel tubing, medium grade, 80 mm bore with all fittings, laid in trenches including taking up old GI pipe complete all as specified and as directed.	44	RM	-	-
6	Supply and laying galvanized steel tubing, medium grade, 50 mm bore with all fittings, laid in trenches including taking up old GI pipe complete all as specified and as directed.	60	RM	-	-
7	Supply and laying galvanized steel tubing, medium grade, 40 mm bore with all fittings, laid in trenches including taking up old GI pipe complete all as specified and as directed.	72	RM	-	-
8	Supply and laying galvanized steel tubing, medium grade, 25 mm bore with all fittings, laid in trenches including taking up old GI pipe complete all as specified and as directed.	72	RM	-	-
9	Supply and laying galvanized steel tubing, medium grade, 20 mm bore with all fittings, laid in trenches including taking up old GI pipe complete all as specified and as directed. Note for item no 4.00 to 9.00 - All fitting & fixture such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector, holding clamp shall be provide as per site requiredment and same shall deem to be included in quoted rate.	78	RM	-	-
10	Supply, laying and jointing of ductile iron pipes with spigot and socket end confirming to IS 8329-2000 suitable for push on rubber joint centrifugally cast, class (K-7), inner side cement lining and outer side black bitumen coating and any length, laid in trenches of 100mm bore pipe including push on rubber (EPDM) ring with ISI marked including taking up old pipe, complete all as specified and as directed.	44	RM	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.68 MB

Work Item Documents

1_CONTENT_TO_NOTE_8364.pdf

Tender Documents • 0.79 MB

2_General_Condition_8364.pdf

Tender Documents • 0.78 MB

3_Spl_Con_8364.pdf

Tender Documents • 0.37 MB

4_PS_8364.pdf

Tender Documents • 1.68 MB

BOQ_886814.xls

BOQ • 0.44 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundations or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10Sqm on plan and not exceeding 1.50m in depth and getting out in soft/loose soil complete all as specified and as directed.

102.5

Cum

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm on soft/loose soil complete all as specified and as directed.

82.24

Cum

Removing excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

20.26

Cum

Supply and laying galvanized steel tubing, medium grade, 100 mm bore with all fittings, laid in trenches including taking up old GI pipe complete all as specified and as directed.

Supply and laying galvanized steel tubing, medium grade, 80 mm bore with all fittings, laid in trenches including taking up old GI pipe complete all as specified and as directed.

Supply and laying galvanized steel tubing, medium grade, 50 mm bore with all fittings, laid in trenches including taking up old GI pipe complete all as specified and as directed.

Supply and laying galvanized steel tubing, medium grade, 40 mm bore with all fittings, laid in trenches including taking up old GI pipe complete all as specified and as directed.

Supply and laying galvanized steel tubing, medium grade, 25 mm bore with all fittings, laid in trenches including taking up old GI pipe complete all as specified and as directed.

Supply and laying galvanized steel tubing, medium grade, 20 mm bore with all fittings, laid in trenches including taking up old GI pipe complete all as specified and as directed. Note for item no 4.00 to 9.00 - All fitting & fixture such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector, holding clamp shall be provide as per site requiredment and same shall deem to be included in quoted rate.

Supply, laying and jointing of ductile iron pipes with spigot and socket end confirming to IS 8329-2000 suitable for push on rubber joint centrifugally cast, class (K-7), inner side cement lining and outer side black bitumen coating and any length, laid in trenches of 100mm bore pipe including push on rubber (EPDM) ring with ISI marked including taking up old pipe, complete all as specified and as directed.