NISER/ IWD-Civil/Acad/25-26/13/45

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 25 mm average thickness.

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

Providing and fixing chicken wire mesh in the junction of Brick wall RCC column/beam etc as per direction of EIC

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm

Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineerin- Charge. With granite stone of colour black, cherry/ruby red of area less than 0.50 sqm.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats. Make: Asian Royale Shyne/Berger Silky Gamour Note: 1. Before paiting all crack and holes to be repaired and grinding through sand paper to make the surface smooth and even. 2. The agency has to submit the consmuption sheet before execution of work. 3. The consumption is minimum of 0.60 Litre for 10 Sqm.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) Make: Asian Apex Ultima protect/ Berger Longlife 10. Note: 1. Before paiting all crack and holes to be repaired and grinding through sand paper to make the surface smooth and even. 2. The agency has to submit the consmuption sheet before execution of work

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds. Fixed window / ventilator with mullion / transom. Using R3 series with frame (55mm & above ) x (45mm & above) & mullion (55mm & above) x (65mm & above). (Height upto 2.5 metre)

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds. Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. Using R3 series with frame (55 mm & above) x (50mm & above) & sash (55 mm & above) x (85mm & above) (Height upto 2.5 metre).

Providing and fixing 4 mm thick ACP over exisitng wooden door using silicon and Philips head screw after removing all fittings and fixture and again fixing the same on the exisitng door as per direction of EIC

Providing and fixing in position rack as per the drawings having compartments with vertical partitions spacing between 0.60m to 1.85m and horizontal compartments spacing between 0.40m to 0.70m with intermediate vertical and horizontal partitions made up of 19mm thick BWR Grade solid ply with 1.0 mm thick lamination (white/off white) for inside area and 1.0 mm thick laminates of approved colour and shade on outside surface with a depth from 0.55m up to 0.75 m and bottom, top, outer sides and back side members made up of 19mm thick BWR Grade ply with 1.0 mm thick lamination of approved colour and shade on one side and front shutters made up of 25mm thick BWP Grade block board with 1.00 mm thick lamination of approved colour and shade on both sides with Heavy duty magnetic catcher, lock (Godrej or equvalent make with minimum three keys) and handle of size of 150 mm, tower bolt of the size of 150mm at top and bottom in one shutter, brass hinges with SS finish or good quality pure SS hinges of 304 grade of size of 150 mm and providing teak wood beadings of suitable width all round the shutters, hinges grooves, shelves, outer frame, vertical and horizontal frame including polishing the teakwood beading and providing and fixing sal wood planks of size 25mmx50mm below the horizontal ply boards along each supporting edges with polishing, including the cost of fevicol, nails, screws, tools, plants, materials and labour charges etc complete as per specification, drawings and as instructed by Engineer- in-Charge. The ply wood of century/green. (Only front elevation area will be measured for billing.)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 20 mm nominal outer dia Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 50 mm nominal dia Pipes

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Single tee with door, 75x75x75 mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm bend

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Single tee with door, 110x110x110 mm

Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately)

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.

Providing and fixing Pillar-cock of Jaquar make DRC-37021 with complete as per direction of EIC

Providing and fixing VGP-81053 Angular Stop Cock with Wall Flange Jaquar make with complete as per direction of EIC

Providing and fixing wash basin Magna Counter Top Wash Basin, Cat No-10079, Size. 63 × 50 cm, Hindware make, connecting pipes with complete as per direction of EIC

Providing and fixing ALD-769, L300x190 Bottle Trap (with Internal Partition) 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange Jaquar make with complete as per direction of EIC

Providing and fixing ALD-805B 450mm Long Braided Hose with Two/one 15mm Nuts & Rubber Washers Without/with Nipple (Suitable for Geysers/wash basin) Jaquar make with complete as per direction of EIC

Providing and fixing ACN-1137N Soap Dispenser with Metallic Bottle Jaquar make with complete as per direction of EIC

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge. All kinds of soil

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Supplying plastic chairs of Nilkamal chair without arm (Model Series Name Novella 07) of size Width: 55 CM, Depth: 44 Cm, Height: 80 CM. Made from high quality virgin plastic build for lasting duarability,Ergonomic design ensures prolonged sitting comfort, The smooth matte finish offers an appealing touch, 110kg load capacity and metal legs for secure sitting.

Horizontal HD ROLLER BLINDS of approved make. (Vista/Mac etc) Type of fabric: Blackout, Composition of Fabric: 100 % Polyester, Blackout Rate: 100%, Weight: 310 g/m2 (±5%), Fabric Thickness: 0.45 MM (±0.05). Light Fastness: 4 Grade, Hanging Properties: Excellent, Tearing Strength: Very High, Coating: Acrylic coating resistant to Cracking & Fraying, Cleaning: Conditionally cleanable with damp cloth. Hardware specification for roller blind: 1. Control unit: The Control unit is made of high strength reinforced plastic. The clutch is of wrap spring design. High carbon steel springs are provided to transmit motion from driving to driven members of clutch Mechanism .Clutch is operated directionally by the use of endless beaded chain. Clutch never needs any Adjustment 2. ldler: ldler is of high strength reinforced plastic, consisting of a center shaft. The idler is mounted on the Bracket by using a plastic lock. The metal sleeve inside the plastic lock provides bearing surface for the Center shaft, which rotates freely, providing smooth, quiet and long wearing operation 3. Head rail: It is an aluminum extruded rail Powder coated in white. Control unit and ldler are mounted on the Head rail with powder coated M.S. brackets 4. Roller tube: it is an anodized extruded tube of high strength alloy. Control unit and ldler are fixed to the either ends of the tube. The fabric of the blind is fitted to the tube with heavy duty adhesive tape 5. Bottom rail: lt is an aluminum extruded rail with a groove for fixing the fabric and power coated in white. lt is fixed to the bottom of the fabric and the purpose of it is, to keep the fabric in tension and straight. The fabric is fitted to the tube using plastic insert. The end caps of the tube are ABS. 6. Operating chain: This is made of 4.5mm plastic beads molded on 2.2mm thick polyester chord. The pitch of the beads is 5mm. The chain drives the sprockets of the control unit to close and open the blind. The pitch of the chain corresponds to the sprocket in perfect match for trouble free operation 7. Fixing brackets & clamps: These are used to fix the blind to the wall or ceiling. 'L' bracket is made of mild Steel and zinc plated. The clamp is made up of spring steel of thickness O.7mm and zinc plated 8. Roller tube: lt is Aluminum alloy Extruded grooved tube, which is anodized. Size- 32mm- O.D.; weight - 0.27 kg/mtr / Size- 38mmO.D.; weight - 0.38 kg/mtr Alloy & temp- 6063-T6 Fabric is fitted on the tube with double sided tape. Bottom Rail: Extruded Aluminum grooved section- powder coated in white Size: 21mm O.D. Alloy-HE9WP Weight -O.28 Kg/mtr. Fabric is fitted to the bottom rail with plastic insert. Bottom rail end cap- made of ABS 9. Bottom Rail: Extruded Aluminum grooved section- powder coated in white Size: 21mm O.D. Alloy-HE9WP Weight - O.28 Kg/mtr. Fabric is fitted to the bottom rail with plastic insert. Bottom rail end cap- made of ABS. 10. Interested vendors may visit site for inspection. 11. Installation and commissioning: with installation and commissioning. for billing actual area of roller blind after opening will be measured.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Hot rolled deformed bars.

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

NATIONAL INSTITUTE OF SCIENCE EDUCATION AND RESEARCH

BIDDER/AGENCY INFORMATION

Notice Inviting E-Tender No.- NISER/ IWD-Civil/Academic/2025-26/13/45, Dated: 30.01.2026

Provision of dinning room back side of flatlet type of guest house, NISER, Jatni

BIDDER/AGENCY INFORMATION

Name of the Vendor

THE BIDDERS ARE REQUIRED TO FURNISH THE FOLLOWING DETAILS AS PER THE FORMAT GIVEN BELOW WHICH IS A MANDATORY REQUIREMENT FOR EVALUATION OF BIDS.

BIDDER’S NAME

BIDDER’S SITE NAME (Name of the Place)

ADDRESS_LINE1

ADDRESS_LINE2

ADDRESS_LINE3

ADDRESS_LINE4

STATE

COUNTRY

PIN CODE

PHONE NO.

FAX NO.

Contractor Registration No. with CPWD/MES/Railways/State PWDs/ DAE/PSU/GoI Empanelled supporting documents (if any)

GST REGISTRATION NO.

PAN NO.

EPFO Registration No

ESIC Registration No (if applicable)

CONTACT PERSON’S NAME

POSITION / DEPARTMENT OF CONTACT PERSON

CONTACT PERSON’S E MAIL ID

CONTACT PERSON’S PHONE NO. AND MOBILE NO.

CONTACT PERSON’S FAX NO.

NATIONAL INSTITUTE OF SCIENCE EDUCATION AND RESEARCH

Notice Inviting E-Tender No.- NISER/ IWD-Civil/Academic/2025-26/13/45, Dated: 30.01.2026

Provision of dinning room back side of flatlet type of guest house, NISER, Jatni

General Conditions for eligibility (INDIVIDUAL)

Name of the Vendor

The bidder must have successfully completed similar works as detailed in the SOQ advertised and shall meet the following minimum commercial criteria in past 7 years having at least any of flowing criteria

Whether 80% of estimated amount of project in a single completed work.

Whether 60% of estimated amount of project in two completed works individually.

Whether 40% of the estimated amount of the project in three completed works individually.

NATIONAL INSTITUTE OF SCIENCE EDUCATION AND RESEARCH

Notice Inviting E-Tender No.- NISER/ IWD-Civil/Academic/2025-26/13/45, Dated: 30.01.2026

Provision of dinning room back side of flatlet type of guest house, NISER, Jatni

ABSTRACT OF General Terms and Conditions of Contract(GTCC)

Name of the Vendor

Earnest money furnished.Bank Guarantee No. & Date / D.D No. & Date.

Whether the bidder is Civil contractor having experience in similar works?

Bidders past job completion/ experience/ user’s certificate furnished or not: -

Whether agreed to job completion schedule?

Whether agreed to General Terms and Conditions as mentioned in the NIT?

Whether agreed for No Escalation for the work?

Whether agreed to furnish Performance Guarantee in shape of Deposit at Call Receipt/Banker's Cheque/Demand Draft/Pay Order of a Scheduled Bank/Government securities/ Fixed Deposit Receipt (FDR) of a Scheduled Bank in case his tender is successful?

Whether agreed to penalty for delayed completion?

Whether agreed to CPWD/DAE standard terms of payment or not?

PAN Card & GST registration certificate furnished or not?

Whether accept all tender Condition, Specification etc. and as unconditional acceptance of the same and uploaded a scanned copy of signed and stamped (on all pages) tender document in e-tender portal

NATIONAL INSTITUTE OF SCIENCE EDUCATION AND RESEARCH

Notice Inviting E-Tender No.- NISER/ IWD-Civil/Academic/2025-26/13/45, Dated: 30.01.2026

Provision of dinning room back side of flatlet type of guest house, NISER, Jatni

TECHNICAL BID

Check List Of Documents

Name of the Vendor

THE BIDDERS ARE REQUIRED TO FURNISH THE FOLLOWING DETAILS AS PER THE FORMAT GIVEN BELOW WHICH IS A MANDATORY REQUIREMENT FOR EVALUATION OF BIDS.

List of similar works completed in last 7 years indicating: i) Agency for whom executed ii) Value of Work iii) Stipulated time of completion iv) Actual time of completion.

List of works in Hand indicating: i) Agency ii) Value of Work iii) Stipulated time of completion iv) Present position.

List of Construction Plants and Machinery

List of Technical Staff

Certificates:

Undertaking in the format provided in the last page of Technical Bid.

FDR/DD of any Scheduled Bank against EMD.

(Scanned copy of original certificates to be uploaded)

NATIONAL INSTITUTE OF SCIENCE EDUCATION AND RESEARCH

Notice Inviting E-Tender No.- NISER/ IWD-Civil/Academic/2025-26/13/45, Dated: 30.01.2026

Provision of dinning room back side of flatlet type of guest house, NISER, Jatni

TECHNICAL BID

Name of the Vendor

DETAILS OF WORK EXECUTED DURING last seven years including current financial year

TOTAL