Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹80.4 LAccepted-AOC FLAT NO B 401 4TH FLOOR NAVADURGA CO OP HSG SOCIETY LTD PLOT NO 7 SECTOR 19A NERUR EAST NAVI MUMBAI THANE MAHARASHTRA 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC Other than being lowest | |
| 2 | L2₹81.7 L+₹30,293.25 (0.37%)Rejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹84.2 L+₹2.8 L (3.42%)Rejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹95.0 L+₹13.6 L (16.7%)Rejected-Finance FLAT NO 002 MAHAVIR VILLA CHS LTD PLOT NO 259 SECTOR 21 NERUL EAST NAVI MUMBAI 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹96.7 L+₹15.3 L (18.8%)Rejected-Finance | L5 | Rejected-Finance Other than being lowest |
Tender Value
₹1.4 Cr
EMD Value
₹2.1 L
Closing Date
25 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
CERTAIN REPAIR TO SOFT PATCH MS WORK HARD STANDING AT SOUTH WHARF AND ACD CONNECTED AREA AT ND MBI UNDER GE NW KUNJALI COLABA MUMBAI
2024_MES_643204_1
8302/CWE(NW)MUMBAI/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Kunjali
As per tender documents
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Kunjali
₹2.1 L
Yes
21 May 2024
20 Feb 2024
27 Mar 2024
20 Feb 2024
25 Mar 2024
12 Mar 2024
20 Feb 2024 - 11 Mar 2024
Amount
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land complete all as specified and directed by Engr-in-charge. Note: The place of disposal shall be find out by the contractor.
Material & labour for brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed by Engr-in-Charge.
Material & labour cement concrete 1:2:4 type B0, (using 20 mm graded crushed stone aggregate) mixed with water proofing compound by weight of 3 % of total cement content in roof, floor complete all as specified and directed by Engr-in-Charge. (WPC shall be measured and paid seperately).
Material & labour for rendering 20mm thick in cement mortar (1:3) on roof top surface finished even and smooth including WPC by weight of 3% of total cement content, priming @ 0.8 kg/Sqm of finished concrete surface complete and evenly applying a coat of cold bituminous at 1 Kg/Sqm and applying seating cloth over clod bituminou, finally paving bitumen of any penetration at 1.5 kg/Sqm complete all as specified and directed by Engr-in-Charge. Note :- WPC will be measured and paid seperately.
Material and labour for ready mix cement concrete in Pavement/Hard standing (PQC) M-40 of flexural strength of 40Kg/Square cm in field using minimum 400 Kg of cement per cubic metre laid in bays or as directed with and including steel formwork to sides of concrete spread, compacted and finished in a continuous operation complete all as specified and directed by Engr-in-Charge.
Supply only recron fibre for RMC 0.25kg /Cum complete all as specified and directed by Engr-in-Charge.
Material and labour for providing precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) in cover slabs for manholes, etc and similar articles with plain fair faces including chamfers, weathering, throating etc and setting in cement mortar (1:4) with joints to match complete all as specified and directed by Engr-in-Charge. Note - Reinforcement shall be measured and paid separetly.
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing 40mm thick polymer plaster (1:5:15, cement, sand, polymer) and finally finishing the surface as direct including removing debries outside MD land complete all as specified and directed by Engr-in-Charge. Note:-i) New reinforcement and MS Sections will be measured and paid separately. ii) The place of disposal shall be find out by the contractor.
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor from RCC columns, beams, walls, chajja etc and exposing the reinforcement using wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as directed, applying two coats of epoxy zinc primer on new and old steel surfaces and applying one coat of polymer modified bond coat on affected concrete surfaces and finally covering with Microconcrete 20mm thick and finishing the surface as directed including removing debries outside MD land complete all as specified and directed by Engr-in-Charge. Note :- i) New reinforcement and MS Sections, microconcrete and form work if required will be measured and paid separately. ii) The place of disposal shall be find out by the contractor.
Supply and fixing welded steel wire fabric, cut to length, fixed to steel members/reinforcement steel, weight n.exc. 4 Kg per Sqm complete all as specified and directed by Engr-in-Charge.
Material and labour for TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips including dismantling of rusted steel complete all as specified and directed by Engr-in-Charge. Note- TMT bars of appropriate size where 30% of cross section is reduced shall be provided.
Material and labour for TMT bars 8mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips in stirrups of designed diameter in various structural elements like column, beams and foundations including drilling, bending and fixing the bars with epoxy putty complete all as specified and directed by Engr-in-Charge. Note- TMT bars shall be provided on the basis of 1% of volume of concrete.
Dismantling wrought or mild steel work of any description complete all as specified and directed by Engr-in-Charge.
Material and labour for Stainless steel decoravtive railings of grade 316, staircase 3 of approved design and pattern made out of SS pipes, SS flats, SS plates with and including necessary welding, buffing, polishing and fixing including necessary drilling, bolting or riveting and embedding post in concrete complete all as specified and directed by Engr-in-charge.
Material and labour for Stainless steel decoravtive railing chain of grade 316, having 8 mm minimum thickness of approved design and pattern used to connect two stainless steel post with hooks etc.including necessary welding , buffing /polishing and fixing complete all as specified and directed by Engr-in-Charge.
Material and labour for preparing old plastered/ concrete surfaces and applying epoxy base joint filler paint on external surfaces of walls/floor to fill the cracks with and including resin and hardner in proportion as per manufacturers instructions complete all as specified and directed by Engr-in-Charge.
Material and labour for drilling and fixing Rohibb teflon nozzles in RCC members, including drilling holes of 12 mm dia, 50 to 100mm deep and shall be carried out as under complete all as specified and directed by Engr-in-Charge. : - (i) Cleaning holes- Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles - Insert 12 mm dia.Rohibb Teflon nozzles in cleaned holes. External end of nozzles shall be manchine to receive outlet of grouting gun. Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min 12 hr. (iii) Cutting of nozzles - Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty & let it dray for 2 to 3 days. Also seal the crack between the ports with epoxy putty. (v) In case crack is wider 2mm upto 4 mm to 5 mm wide drill holes at the sides of crack in a staggered manner , at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the crack with a liberal application of the epoxy putty including necessary scaffolding and safety measures upto any height.
Material and labour for injecting of site mixed cement slurrry grout, mixed in specifified proportion containining cement ,sand, water with addition of plasticizers & migratory corrosion inhibitor, water cement ratio shall be varied between 0..5 to 1.0 for each hole, shrinkage compensation slurry mixed to a lump free frresh creamy consistency, mixing shall be done by mixer continuouly stirring mechanically to keep cement particles in suspension. Injection of approved/specifified grout by means of pump at a pressure of 3-5 Kg/cm2 till the grout mix flows out from the nozzle including scaffolding and safety measures complete all as specified.
Material and labour for injecting Low visosity (3-5cps) high molicular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, including, mixing or material as mixing of material components (Part a&b) in the required quantities as per manufacturer's instruction by weight batching. Fill the grouting gun with concrete penetrating corrosion inhibitor EPCO-KP-100/protectsil CIT or Ferogard 903. Maintain desired pressure in the gun by air compressor ; maintain the pressure at exit (2 to 3kg/Cm2) by monitoring pressure guage at exit grout the material through prefixed nozzles in the structural elements @ 100ml per nozzle. Repeat the precess for all the nozzles and including scaffolding upto any height complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and directed by Engr-in-Charge. Note: The place of disposal shall be find out by the contractor.
Material and labour for rendering 15 mm thick on fair faces of brickwork or concrete surfaces in CM (1:4) mixed with integral water proofing compound and finished even and fair complete all as specified and directed by Engr-in-Charge. Note- Water proofing compound will be measured and paid for separately.
Material & labour for rendering minimum 20mm thick polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive Monolith - PMM 15% by weight of cement in one coat with and including curing as per manufacturer's instruction complete all as specified and directed by Engineer-in-Charge.
Supply and applying microconcrete of Fosroc, Dr Fixit, or equivalent aroung edges of Dock walls, jetties, corners, grooves, alters, steps, piers and other marine structure after complete cleaning of concrete surface and applying epoxy coat as bonding agent Fosroc's Nitobond or equavalent for bonding between old and new surface, including all lifts, shuttering all as required as per site condition incl demoltion of existing builtup concrete and complete all as specified and directed by Engr-in-Charge.
Supply only Integral waterproofing compound complete all as specified and directed by Engr-in-Charge.
Material & labour for cleaning the surface of the stone/concrete in jetty , dock,retaining wall, piers of jetty and bottom portion of deck slab etc above sea with mechanical grinder and specialized water misting techniques using water jet with a fine nozzle sprinkling system calibrated to spray a fine mist along the stone/concrete surface and removing all sea vegetation complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruments required at site.
Material and labour for applying two coats of anti carbonation paint over vertical concrete surface in jetty/dry dock above sea level complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruments required at site.
Material & labour for formwork to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels cantilevers, shelves including supt-ports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete flat.complete all as specified and directed by Engr-in-charge.
Material & labour for form work to sides of square, rectangular or polygonal pillars, post, struct, columns for rough finished surfaces of concrete flat.complete all as specified and directed by Engr-in-charge.
Material & labour for errection MS tubler double scaffolding (H frame) upto height of 30m with necessary brazing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloths for carring out external face work of walls & dismantling and removing the scaffolding complete all as specified and directed by Engr-in-charge.
Supply and fixing mild steel plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment including all necessory drilling, bolting,riveting or welding conforming to FE 410-W, (Gde- E-250) quality-A complete all as specified and directed by Engr-in-charge.
Supply and fixing structural mild steel framed works such as angle, channel, grating, gate, ladder confirming to Fe-290, E-165 as in supporting structure of duct, drain edge etc including making good the disturbed portion of concrete surfaces with PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) complete all as specified and directed by Engr-in-charge.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of Oil emulsion distemper over a coat wall care putty of 3mm thick and alkali resistance primer complete all as specified and directed by Engr-in-Charge.
Material & labour for complete removal of existing treatment from wall surfaces and applying a coat of wall care putty 3mm thick and applying two coats of oil bond distemper over a coat of alkali resistant primer complete all as specified and directed by Engr-in-charge.
Material and labour for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.
Material and labour for preparation of old decorated surfaces in ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
Material and labour for preparation of new plastered wall surfaces over 10cm width or girth and applying two coats of 100% acrylic, weather resistant emulson over a coat of exterior wall primer complete all as specified and directed by Engr-in-Charge .
Dismantling timber scantlings 40 sq. cm and over in section, in wooden coping from edgges of jetty in unframed work and deposited to MCM store yard complete all as specified.
Supply & fixing 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental wooden planks of size 3000 mm x 300 mm x 150 mm in one piece including suitabe fixing arrangement as per existing complete all as specified and directed.
Supply & fixing 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental wooden planks of size 2000 mm x 300 mm x 150 mm in one piece including suitabe fixing arrangement as per existing complete all as specified and directed.
Supply & fixing 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental wooden planks of size 1000 mm x 300 mm x 150 mm in one piece including suitabe fixing arrangement as per existing complete all as specified and directed.
Supply and fixing GI anchor bolt fastners of size 500mm long and 30mm dia including drilling holes in timber, concreting and grouting as required complete all as specified and directed by Engr-in-Charge. Note: In case of non availability of required length and dia of fastener bolt, next higher size as available in market will be used for work without any extra price adjustment.
Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.
Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying a coat of synthetic enamel paint of approved colour complete all as specified and directed by Engr-in-Charge.
Material and labour for preparation of old decorated surfaces of wall by complete removal of existing paint over 10cm width or girth and applying two coats of 100% acrylic, weather resistant emulson over a coat of exterior wall primer complete all as specified and directed by Engr-in-Charge .
Material and labour for epoxy base joint filler paint on external surfaces of walls/floor to fill the cracks with and including resin and hardner in proportion as per manufacturers instructions complete all as specified and directed by Engr-in-Charge.
Material and labour for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of epoxy paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.
Material and labour for preparation of old steel surfaces exc 10 cm width or girth and applying two coats of epoxy paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.
Material and labour for preparation of surfaces and applying two coat of floor paint complete all as specified and as approved by GE.
Material and labour for rendering 20mm thick cement plaster in CM (1:3) mixed with WPC by 3% of weight of cement on roof top surface and finished even and fair , priming @ 0.8 Kg per sqm of finished concrete surface and applying a coat of cold bituminous at 1 Kg per sqm and applying seating cloth over cold bituminous surface and applying paving bitumen of any penetration at 1.5Kg per sqm complete all as specified and directed by Engineer-in-Charge. Note -WPC shall be measured and paid seperately.
Material & labour for preparing old steel surfaces of any description n.exc 10 cm in width or girth by removal of rust and aplying one coat of antirust liquid over a coat of zinc chrome primer complete all as specified and directed by Engr-in-charge.
Material & labour for preparing old steel surfaces of any description n.exc 10 cm in width or girth and aplying two coats of epoxy paint complete all as specified and directed by Engr-in-charge.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land complete all as specified and directed by Engr-in-charge. Note: The place of disposal shall be find out by the contractor.
Material and labour for machine pressed precast concrete inter locking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope and joined complete including spreading screened river sand over surface for filling the joints with rising surface and gently rolled with vibrator complete all as specified and directed by Engr-in-charge.
Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-charge.
Supply & Fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.
Supply & Fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge,crumple joint etc fixed with self tapping screws complete all as specified and directed by Engr-in-charge.
Material and labour for mild steel plain black sheeting 1.50 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed by Engr-in-charge.
Shree Ayyappa Engineering
Nilesh Construction
RAJENDRA CONSTRUCTION
jalandhara construction
Shetty Construction Co
pk Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .