Provn of 06 x Single Living Accn with bathroom for Women Police and certain Revenue work under AGE B/R Beas under GE Kapurthala.

Amount

Surface excavation in any type of soil not exc 30 cm and averaging 15 cm deep and getting out complete all as specified and as directed.

Excavating in trenches not exc 1.5 m wide and not exc 1.5m deep and area not exceeding 10 sqm on plan for foundation/foundation of poles/stays/laying of cable etc and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches, not exc 1.5m wide and depth exceeding 1.5m but not exceeding 3.0m, for foundation and getting out in any type of soil complete all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and as directed.

Removing excavated material (soil) not exceeding 50m and depositing where directed at a level not exceeding 1.50 mtr above the starting point complete all as specified and as directed.

Removing excavated material (soil)/bushes/shurbs etc to a diastance exceeding 50m but not exceeding 250m and depositing where directed at a level not exceeding 1.50 mtr above the starting point complete all as specified and as directed.

M&L for treating the bottom and sides of excavation @ 5 ltrs of emulsion per sqm of the surface area complete all as specified and as directed.

M&L for treating the backfill in contact with foundation @ 7.5 ltrs of emulsion per sqm of the vertical surface complete all as specified and as directed.

M&L for treating the top surface of filled earth @ 5 ltrs of emulsion per sqm of the surface area complete all as specified and as directed.

M&L for treating the soil under plinth protection @ 5 ltrs of emulsion per sqm of the surface area complete all as specified and as directed.

M&L for hardcore of broken stone or boulders gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for precast cement concrete 1:2:4, type B-1 as in kerb stone, fair faces including chamfers, weatherings, throating etc and setting in cement mortar(1:4) including necessary formwork complete all as specified and as directed.

M&L for sand filling under floors including watering, well ramming and consolidation complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block of approved shape and size confirming to IS 15658-2006 of 60mm thickness of M-35 Grade complete all as specified and as directed.

M&L for plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and as directed.

M&L for brick work with fly ash bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and as directed.

M&L for Brick work with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and as directed.

M&L for Brick work with fly ash bricks (old size), straight or curved on plan any radius in half brick thick wall with old size bricks built in cement mortar 1:4 complete all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D-2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested of bore 150mm dia drain pipe complete all as specified and as directed.

M&L for 100mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring including finishing the top surface even & fair without using extra cement complete all as specified and as directed.

M&L for reinforced concrete pipes of 150mm bore with collars of class NP-2, laid in trenches and jointed complete all as specified and as directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F TMT bars but 5mm and over upto 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Use and waste of formwork to sides of concrete fair finished surfaces of foundations footings bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work verticle or flat complete all as specified and as directed.

Use and waste of formwork to sides and soffits of beam of any description, concrete surface fair finished complete all as specified and as directed.

Use and waste of formwork to chajjas, concrete fair finished surfaces complete all as specified and as directed.

Use and waste of formwork to sides of pillars, post, struts, columns etc concrete fair finished surfaces complete all as specified and as directed.

Use and waste of formwork to soffits of concrete fair finished surfaces of suspended slabs such as roof slab, floor slabs landings and similar works not exceeding 200mm thick complete all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm complete all as specified and as directed.

M&L for reinforced cement concrete M-25 design mix (using 20mm graded aggregates) as in foundation including footings, foundation beams, plinth beams, base for columns etc basement slabs and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregates) in Beams, cantilevers, lintel over 1.5m span etc complete all as specified and as directed.

M&L for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregates) as in chajjas etc complete all as specified and as directed.

M&L for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregates) as in columns etc complete all as specified and as directed.

M&L for reinforced cement concrete M-25 design mix (using 20mm graded aggregates) as in slabs supported on walls beams, columns etc and plastering in CM 1 :3 mixed with Polymer water proofing compound on green concerte complete all as specified and directed. Note : Plastering and water proofing compound shall be measured and paid separately.

M&L for rendering 15mm thick in CM 1:4 with liquid water proofing compound (1% by weight of cement content) on brick work or concrete surfaces of wall, surfaces finished even and fair using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

M&L for rendering 10mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick in cement and sand mortar 1:3 using liquid water proofing compound (1% by weight of cement content) on roof slab in green concrete including finishing the surface even and fair without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling/Top and sides of chajjas/facia of roof projection including necessary formwork including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Supply only polymer liquid water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of Oil Bound distemper over a coat of appropriate primer complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of Acrylic Emulsion paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for applying one coat of wall care putty of 2mm thick complete all as specified and as directed.

S&F for pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling of chowkhats with PCC 1:3:6 type C-1 using 12.5mm graded stone aggregates as in frames/hold fast blocks complete all as specified and as directed.

S&F solid PVC door frame factory made of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specifications all as per SSR Part-I as specified and directed.

S&F factory made solid panel PVC moulded door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing including fittings all as specified and directed.

S&F for 30mm thick Factory made Glazed and skeleton shutters made up of 2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members as specified supplied and fitted to chowkats complete all as specified and as directed.

S&F for 35mm thick Factory made Plain framed, panelled shutter (two panel) made up of 2nd class hardwood with lock rail and panel of 9 mm commercial ply with commercial veneering on both faces. The size of rail and stile as per specification, kiln seasoned and chemically pressure treated, sizes of members as specified supplied and fitted to chowkats complete all as specified and as directed.

S&F for steel windows/ventilators box type comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing 150 mm c/c fixed in frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc complete all as specified and as directed.

S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other Door coverings, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and as directed.

S&F for steel work as in tubular trusses incl special shaped washer etc complete using running welded complete all as specified and as directed.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as specified and as directed.

S&F for galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F for 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.

S&F for 3.0 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm in width or girth including preparation of surfaces and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and priming with red oxide primer and painting with two coats of synthetic enamel paint complete all as specified and as directed.

S&F of PVC Solid frame fixed in Cupboard with x-sectional area of frame between 8Sqcm to 15Sqcm complete all as specified and as directed.

S&F of factory made 18mm (+ 0.7mm) thick PVC sheet one side preleam sheet for cupboard shutter and finish at all edges complete all as specified and as directed.

S&F of factory made 12mm (+ 0.7mm) thick PVC sheet one side preleam sheet for cupboard shutter and finish at all edges complete all as specified and as directed.

S&F of continous (Piano) type hinges mild steel bright finish or electro galvanised with wide of flaps 30mm complete all as specified and as directed.

S&F for Stainless steel butt hinges of size 100mm long medium weight complete all as specified and as directed.

S&F of luminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300mm. Complete all as specified and directed.

S&F of 200mm long, aluminium anodised, barrel tower bolts, of extruded section complete all as specified and directed.

S&F of 150mm long, aluminium anodised, barrel tower bolts, of extruded section complete all as specified and directed.

S&F of aluminium handles cast type anodised of size 150mm long complete all as specified and directed.

S&F of aluminium handles cast type anodised of size 75mm long complete all as specified and directed.

S&F of 300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F of ball catcher with proper magnetic effect fixed with shutter complete all as specified and directed.

S&F of Hasp and staple of size 100 mm, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

M&L for plain cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in copings, benching, haunching, bond stones bed and the like including use of necessary form work complete all as specified and directed.

S&F for 20 mm bore stainless steel curtain rod with 1mm thick wall thickness and each length not more than 1.5 Metre including a pair of brackets and knobs with each length/piece, fixed on doors and windows opening for hanging curtains complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2 as in sub base for pavement, floor etc complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-1, using 20mm graded crushed stone aggregates, including finishing surface of concrete topping even and rough complete all as specified and directed.

M&L for non skid ceramic joint free tiles 7 to 8 mm thick coloured/wooden finish (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement and sand mortar 1:4 complete all as specified and directed.

M&L for non skid Ceramic joint free tiles 7 to 8 mm thick coloured/wooden finish (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick plaster in cement and sand mortar 1:4 complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed.

M&L for Glazed coloured ceramic tile of size 450x300x7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick plaster in cement and sand mortar 1:4 complete all as specified and as directed.

M&L for 18mm thick Zed Black Granite machine cut in any position bull nosed on front face, laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 16-18 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 16-18 mm thick over and including 10mm thick rendering in cement and sand mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in riser of steps/ pillars/ skirting/ dado including rubbing and polishing complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair without using extra cement complete all as specified and as directed.

S&F of rotational moulded polythelene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position as per SSR Part-1 of 1000 ltrs capacity including fittings complete all as specified and directed

S&F of 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight : 25mm-455gms) for 20mm bore fixed complete all as specified and as directed.

S&F of 15mm bore Steel water tubing medium grade, galvanised, including short lengths, fixed to wall/concealed in wall/ceiling or laid in floor complete with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc complete all as specified and as directed.

All as per item No 88 above but 20mm bore complete all as specified and as directed.

S&F of vitreous china squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc complete all as specified and as directed.

S&F of vitreous china wash down water closet pan of size 580x440mm coloured with pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc complete all as specified and as directed.

S&F of plastic water closet seat cover, closed pattern with flat bottom, mild steel chromium plated or aluminised hinging device (colour of cover should match with water closet) complete all as specified and as directed.

S&F of PVC low level flushing cistern, valveless, syphonic action type of 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 60/90cm long etc, complete all as specified and as directed.

S&F of vitreous china wash hand basin counter type, coloured flat back of size 630 x 450mm excluding pillar tap but including waste fitting, a pair of CI brackets & waste pipe etc complete all as specified and as directed.

S&F of 15mm bore Brass CP mixer for mixing hot & cold water in wash hand basin screwed down for iron pipe and fixed complete all as specified and as directed.

S&F of 15mm bore CP Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F of 15mm bore CP Stop valve/Angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F of 15mm bore fancy type, chromium plated Stop valve with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F of 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F of stainless steel gratings 75mm bore size fixed with cement motar complete all as specified and as directed.

S&F of PVC connection of 15 mm size, of length 450mm, with PTMT nuts supplied and fixed complete all as specified and as directed.

S&F of CP Brass Tubular towel rail 20mm dia D-type 60cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed.

S&F of Soap dish, Stainless steel of size 160x160x90mm complete all as specified and as directed.

S&F of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F of shower rose of 100mm dia of stainless steel with shower arm fixed complete all as specified and as directed.

S&F of jet spray for EWC incl required length of tube fixed with water tubing/stop cock including necessary fittings complete all as specified and as directed.

S&F of health faucit for EWC with 1.5 m length of tube fixed with water tubing/stop cock including necessary fittings complete all as specified and as directed.

S&F of 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in trenches/floors/walls fixed complete all as specified and as directed.

All as per Srl Item No 109 above but 110mm bore of pipe complete all as specified and as directed.

S&F of 75mm bore PVC (SWR) floor bend, plain including jointing with solvent cement complete all as specified and as directed.

All as per Srl Item 111 above but 110mm bore of pipe complete all as specified and as directed.

S&F for 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F of 110mm bore PVC (SWR) junction single, (Single T) equal or unequal fixed with solvant complete all as specified and as directed.

S&F of 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal fixed with solvant complete all as specified and as directed.

S&F of 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.

M&L for providing cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in landings, cover slabs upon drainage system including necessary form work etc complete all as specified and as directed.

Cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting exceeding 10cm but not exceeding 20cm in girth complete all as specified and as directed.

M&L for APP modified roof treatment over non-accessible RCC roof slab/chajjah/canopy/ parapet wall to be executed through approved applicator of the membrane manufacturer with following specification complete all as specified and as directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 litre/Sqm manufacture by the same agency as that of APP with a density of 0.87-0.89 Kg per litre at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.0 Kg/Sqm reinforced with non-woven polyster fiber of weight not less than 160 gsm/sqm using butane torch by torch application with 10 cm side laps and 15 cm end lap, complete all as specified and as directed.

M&L for PCC padding 1:2:4, type B-1(using 20 mm graded crushed stone aggregate) of average thickness 50mm to be provided in slope fixed with chicken wire mesh complete all as specified and as directed.

M&L for Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green in squares of 300x300mm complete all as specified and as directed.

M&L for Soakage well with inner size 1.20 M dia X 3.00 M deep and Filling with brick bats upto 600mm depth including excavation in any type of Soil, Foundation in PCC 1:3:6, walls of Honey combed and brick masonry brick work in CM 1:4 and RCC slab in M-25 Concrete, including intercepting chamber, screen chamber, vent pipe on top and necessary manhole cover, complete all as specified and as directed.

M&L for point wiring for one light / fan / bell point with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor ( FRLS ) 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor (FRLS ) 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel Metal flush mounting box for mounting of fittings like switch , socket and fan regulator and cover plat of suitable modules capacity and make of swich socket complete all as specified and as directed :-

(a) One light point controlled by one, one way switch

(b) One fan point controlled by one, one way switch

(c) One socket outlet 3 Pin, 5 Amp on independent board

(d) One socket outlet 3 Pin, 5 Amp on same board.

(e) One bell point controlled by one bell push

All as per item No 123 here in before but 2.5 Sqmm P.V.C insulated un sheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board complete all as specified and as directed.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate, isolated body complete all as specified and as directed.

S&F of Bell push flush type 5 Amp complete all as specified and as directed.

S&F of Buzzer/Ding Dong, A C, 230 volt single pole complete all as specified and as directed.

S&F of PVC/Polycarbonate Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings type with back plate suitable for batten fittings complete all as specified and as directed.

S&F of switch piano flush type single pole one way 6 Amp complete all as specified and as directed.

S&F of switch piano flush type single pole one way 15 Amp complete all as specified and as directed.

S&F of socket out let 2 in 1, 3 pin 5 Amp flush type complete all as specified and as directed.

S&F of socket out let 2 in 1, 3 pin 15 Amp flush type complete all as specified and as directed.

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete including cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed. Note : Two run of 6.00 Sqmm cable one run of 6.00 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit)

S&F of LED decorative box batten type light fitting 20 watt with LED Tube rod 4 feet 20 watt along with all accessories, pre-wired fixed on wall/ceiling and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and as directed.

S&F of LED mirror light fitting 2 feet long of 10 watt alongwith all accessories, pre-wired fixed on wall/ceiling and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and as directed.

S&F of LED Security light fitting 35 watt pressure die cast aluminium housing, heat resistant toughened glass with frame IP 66 Protection cat Part No LSTN-30-CDL of Make - crompton Greaves or equivalent in Philips/Bajaj or as mentioned in list of makes complete fitting including 1.5 mtr long 40/50 mm (Suitable size for fixing of LED light fitting) bore GI pipe mounting bracket/Clamp made to shape for fixing on pole with 40 mm x 6 mm flat iron clamp 02 numbers with 16 mm dia bolts, nuts and washers all as specified and directed. Note : Contractor shall provide 2 years written manufactures warranty for the LED fixture complete including driver from the certified date of completion.

S&F of LED Bulk head fitting of 10 watt highly cost effective compact, ultra low energy, modern design utility bulkhead suitable for indoor and outdoor applications with IP 65 protection cat part No LBH-10- CDL of make : Crompton or equivalent in Syska/Philips/Bajaj or as mentioned in list of makes complete with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and as directed.

S&F of sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with 200 Amps rated bus bar complete all as specified and as directed.

S&F of SP 6 To 32 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

All as per item No 139 above but SPN 32 AMP complete all as specified and as directed.

All as per item No 139 above but SPN 40 to 63 AMP complete all as specified and as directed.

S&F of ceiling fans complete with three blade, down rod, accessories 230V of 1400mm sweep, with Squirrel cage induction motor complete all as specified and as directed.

S&F of 300mm sweep exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200 with Copper winding complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as specified and as directed.

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 25 Sqmm 2 core laid in trences, in floor, in duct, through pipes or along the pole complete all as specified and as directed.

M&L for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and directed.

M&L for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and as directed.

S&F of air termination signle pointed aluminium rod 12 mm dia and 300mm long and secured to aluminium flanges grouted in floor, roof etc and connected to roof conductor with calmps complete all as specified and as directed.

S&F of GI pipe light garde of 40mm dia for installing air termination rod including fixing arrangment of elctrode complete all as specified and as directed.

M&L for PCC Type B1-1:2 4 with 20mm graded crushed stone aggregate for foundation blok for mounting air termination pipe complete all as specified and as directed.

S&F of aluminium strip 25 x 3.15 mm size fixed on suitable grooved porcelain insulators 60 cms RM apart with aluminum saddles/clamps fixed in roof/wall as roof down conductors all shown on drawing and specified in IS 2309 of 1969 including all fixed material complete all as specified and as directed.

M&L for Inspection joint between down conductor and earth conductor using 75 mm x 75 mm x 25 mm Each size made out of gun metal or phosphor bronze of aluminium 100mm in length between Gl and aluminium strips (Bitmetallic Connection) connected togerther with 2 Nos of G.I. bolts, nuts washer of 6 mm dia and the joint housed inside inspection box of size 150mm x 120mm fabricated with 3 mm thick G.I. sheet with fixed back side on suitable G.I. bolts and nuts ground on wall the front side is removable inspection/testing complete all as specified and as directed.

S&F of GI Strip 32 x 6 mm on wall and burried in ground as earth conductor complete all as specified and as directed.

S&F of switch flame proof rotary type with termination box in LM6, 16 A, single pole 250 V (ISI Marked) complete all as specified and as directed.

S&F of LED Light fitting 2 X 16 Watt flame proof, CMRI certified recommended for gas/ vapour group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast Aluminium housing with heat resistance toughened glass with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including connecting up with core flexible copper conductor cable with suitable size complete all as specified and as directed.

M/S SK ATLANTIC ENTERPRISES (BID ID -3329028)