Repair of Type-II Quarters (2nos.) at Ithai barrage, Ithai

Amount

Demolition above GL upto floor two level including disposal of unserviceable materials within 50m lead.13.6.1 unreinforced cement concrete upto 15cm thickness.

Demolition above GL upto floor two level including disposal of unserviceable materials within 50m lead.13.6.2 unreinforced cement concrete more than 15cm thickness.

Providing and laying cement concrete in foundation and plinth. (2.1.3) 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size).

12mm cement plaster 1:4 (1cement: 4 fine sand). (11.2)

Repairing of plaster i/c cutting & the patch in proper shape & Preparing the surface of the wall complete 12.1.1 with cement mortar 1:4 (1 cement: 4 fine sand).

Neat cement punning

Providing and laying vitrified P bar tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S 15622 of approved make in all colours and shade in laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) i/c grouting the joints with white cement and matching pigments etc. complete. 9.31.1 size of tile 600x600mm (single charged) 9.31.1.1 Non branded.

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S 15622 of approved make, in all colours and shade, in skirting, riser of steps, over 12mm thick bed of cement mortar1:3 (1cement:3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. 9.32.1 size of tile 600x600mm(singled charge d) 9.32.1.1 Non- branded.

Providing wood work in frames of doors, windows, clerestory window and other frames, wrought framed and fixed in position. 7.1.2 local best quality Uningthou.

P/F 35 mm thick panelled, glazed or panelled and glazed shutter for doors, windows and clerestory windows i/c bright finished or black enamelled M.S Iron but hinges with necessary screws. 7.8.2 Uningthou Wood.

Painting (two or more coats) with synthetic enamel paint of approved quality all shades except black or chocolate on steel or new work to give an even shade.

Painting (two or more coats) with synthetic enamel paint of approved quality in all shades except black or chocolate on steel or new work to give an even shade.

Providing & fixing Aluminium handles with necessary screws etc, complete. 100mm

Providing & fixing Aluminium Tower bolts (barrel type) with screws etc, complete. 150x10mm

Removing white or colour wash by scrapping sand paper and preparing surface smooth i/c necessary repair to scratches etc. complete

Providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepared the surface even and smooth complete.

Painting on wall with (two coats) of Dulux Acrylic emulsion (Supreme 3 in 1) paint or equivalent of approved quality in all shades on new work to give an even shade.

Finishing walls weather shield paint of approved quality on new work (three or more coats) to give even shade.

Providing and laying cement concrete in foundation and plinth. (2.1.5) 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size).

2nd class (local 1st class) brick work in foundation and plinth in cement mortar 1:4 (1 cement: 4 Fine sand).

Half Brick masonry 2nd class (local 1st class) in cement mortar 1:4 (1 cement: 4 Coarse sand) in superstructure.

Polygonal rubble masonry /R.R masonry (uncoursed /brought to courses) Squared rubble masonry (uncoursed/ brought to courses) with hard stone of approved quality in foundation & plinth in cement mortar 1:3 (1cement :3 course sand ) i/c levelling up with cement concrete 1:6:12 (1 cement :6 coarse sand:12 stone aggregate 20mm nominal size )at Plinth level.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive)as per IS : 277 and consisting of angle cleats of size 25mm wide X 1.6mm thick with flanges of 27mm flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall /partition with the help of rawl plugs at 450mm centre ,with 25mm long dry wall screws @230mm interval, including fixing of Gypsum board to 10.61.1 12.5mm thick tapered edge gypsum plain board conforming to IS :2095-part-I.

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.(1.10.2) Hard / dense soil.

Steel work welded in built up sections, framed work in cutting, hosting, fitting in position and priming coat of red lead paint.8.4.7 in stair case i/c stringers, treads landing, hands rails etc.

Earth work in surface excavation exceeding 30cm in depth but exceeding 1.5m in width as well as 10 sqm on plan i/c disposal of excavated earth lead upto 50 m and lift upto 1.5m disposal soil to be levelled and neatly dressed in 1.6.2 Hard/dense soil.

Trapezoidal Pre-painted Profile Sheet roofing of approved brand DYNA Roof or equivalent with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps complete, excluding the coat of purlins & trusses. 10.63.2 i) Pre painted Galvanised iron Sheet (PPGL) (i) Profile sheet 0.35mm/2.8kgs/sqm

Trapezoidal Pre-painted Profile Sheet for Ridges Gutter or Valley 610 mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps completed, excluding the coat of purlins rafter & trusses.10.64.2 2 i)Pre painted Galvanised iron Sheet ( PPGL) (i) Profile sheet 0.35mm/2.8kgs/sqm

Aluminium glazed windows and ventilators of standard aluminium extrusion joint mitre and riveted/ screwed with 15x3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15x10x10 cm of 1:3:6 (1 cement: 3coars sand: 6 stone aggregate 20 mm nominal size) or wooden plugs and screws 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of glass panes 4mm thick, projecting hinge, handles, peg stays, bolting devices, locking arrangements, spring catch & aluminium clip beading tec. as required complete. Readymade aluminium ventilators (side hung)

Providing and fixing white vitreous china pedestal type water closet ( European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device ( handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. WC pan with ISI marked white solid plastic seat and lid.

Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets, 15 mm CP brass pillar taps and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 24.12.1 kitchen sink with drain . 510x1040 mm bowel depth 250 mm

Providing and fixing P.V.C waste fittings complete. Flexible pipe, 32 mm dia.

Providing and fixing wash basin with C.I. brackets, 15mm dia CP Brass single hole basin mixture of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 550x400mm with a 15mm CP Brass single hole basin mixer.

Providing and fixing 600x20mm C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (Hook type) fixed to wooden cleats with C.P. brass screws.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: Rectangular shape 453x357mm.

Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fitting of pipes & fitting with solvent cement, trenching, refilling & testing of joints as per direction of Engineer in charge. 110mm dia.

Providing and laying rectified (Non-skid) Gazed Ceramic floor Tiles 300x300mm or more (thickness to be specified by manufacturer) of 1st quality conforming to IS: 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red, Broun, laid on 20mm thick Cement Mortar 1:4 (1 Cement: 4 Coarse sand) including pointing the joints with cement and matching pigments etc. complete.

Providing and fixing CP brass bib cock of approved quality conforming to IS: 8931 25.19.1 15mm nominal bore.

Providing and fixing G.I pipes complete with G.I fittings and clamps i/c cutting and making good the wall etc. (Internal work) 25.5.1 15mm diameter.

Providing and fixing G.I pipes complete with G.I fittings i/c cutting and refilling etc. (external work) 25.6.1 15mm diameter.

Providing and fixing G.I pipes complete with G.I fittings i/c cutting and refilling etc. (external work) 25.6.3 25mm diameter.

Providing and fixing grating of approved quality for Nahni trap 24.29.1.1 100mm nominal diameter.

Add EPF 0.65%

Add CESS 1%

Add GST @ 18% GST

M/s RK KESHORJIT SINGH

M/S M. Jatikumar Singh