Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹6.6 LAccepted-Finance OPPOSITE VIPUL GAS AGENCY HOSPITAL ROAD SOLAN H P | SOLAN | SOLAN | HIMACHAL PRADESH | ₹6.6 L | 1 | Accepted-Finance Accepted |
| 2 | 2₹7.3 L+₹72,500 (11.0%)Rejected-Finance H NO 281 PHASE III HOUSING BOARD BADDI TEHSIL BADDI DISTRICT SOLAN HP | ₹7.3 L+₹72,500 (11.0%) | 2 | Rejected-Finance Rejected |
| 3 | 3₹7.5 L+₹91,000 (13.8%)Rejected-Finance HAMIRPUR ROAD NEAR BUS STAND UNA DISTT UNA HP | UNA | HIMACHAL PRADESH | 174301 | ₹7.5 L+₹91,000 (13.8%) | 3 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | SS ENGINEERING WORKS L3 | ANITA KUMARI CONTRACTOR L2 | ROYAL ENGINEERING WORKS L1 |
|---|---|---|---|---|---|---|
| 1.00 | Providing Installation i/c testing and commissioning at site horizontal spindle horizontal split casing/end suctions (back full out arrangement) single/double/ multistage centrifugal pump or combination of pump in series of recommended make such as Mather and Platt/ KSB/ Kirloskar /Becon weir/BE/Jyoti as per IS-1520-1980 / IS 5659 - 1970 with up to date amendments, read with IS: 9137-1978 or latest edition suitable for lifting clear / raw water for under mentioned characteristics with bronze impellers/priming funnels, casing ring and shaft sleeves of bronze, shaft of steel grade EN-8 with cast iron casing coupled directly through a flexible coupling on a MS/Cast steel base plate ( base plate to be from the manufacturers of the pumping unit only) to Squirrel Cage / Slipring drip proof induction motor of standard make such as Kirloskar /Crompton /Bhel/NGEF/GEC/Siemen/Jyoti/ABB and suitable for operation on 400 (+)/-) 10% volts, 50 cycles/second, 3 phase AC electric supply. The power of electric motor should be at least 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-) 25% of the duty point head. The motor should be as per IS: 325-1978 with up to date amendments read with IS: 900-1972. It should include cost of bearing nuts, bolts and pointing etc. and should meet the following requirements:- | 1 | 1 Set of 60 HP | 6,13,500 ₹6,13,500 | 5,89,000 ₹5,89,000 | 5,00,000 ₹5,00,000 Lowest |
| 1.01Discharge (Q) : - 7.250 LPS | ||||||
| 1.02Total dynamic head : 297 mtrs. | ||||||
| 1.03(a) LWL in sump well (h) : | ||||||
| 1.04(b) Shaft level : | ||||||
| 1.05(c ) Level at discahrge point : | ||||||
| 1.06(d) Suction lift : | ||||||
| 1.07(e) Residual head : | ||||||
| 1.08(f) Static head : | ||||||
| 1.09(i) Rising Main : | ||||||
Tender Value
₹8.4 L
EMD Value
₹16,800
Closing Date
7 Aug 2026, 11:00 amClosed
Executive Engineer
Jal Shakti Division Baddi
(SH S E of centrifugal pumping machinery along with allied accessories LWSS Joharji 1st stage) (Under PDNA) (Sanction ID 9191-9169)
2026_HPIPH_140392_1
NIT No. 10624-724 Dt. 01-08-2026
Open Tender
Civil Works
Item Rate
90 days
Baddi
Please refer Tender documents.
7 documents required · 7 mandatory
₹350
₹16,800
17 Aug 2026
1 Aug 2026
7 Aug 2026
1 Aug 2026
7 Aug 2026
1 Aug 2026
1 Aug 2026 - 6 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing Installation i/c testing and commissioning at site horizontal spindle horizontal split casing/end suctions (back full out arrangement) single/double/ multistage centrifugal pump or combination of pump in series of recommended make such as Mather and Platt/ KSB/ Kirloskar /Becon weir/BE/Jyoti as per IS-1520-1980 / IS 5659 - 1970 with up to date amendments, read with IS: 9137-1978 or latest edition suitable for lifting clear / raw water for under mentioned characteristics with bronze impellers/priming funnels, casing ring and shaft sleeves of bronze, shaft of steel grade EN-8 with cast iron casing coupled directly through a flexible coupling on a MS/Cast steel base plate ( base plate to be from the manufacturers of the pumping unit only) to Squirrel Cage / Slipring drip proof induction motor of standard make such as Kirloskar /Crompton /Bhel/NGEF/GEC/Siemen/Jyoti/ABB and suitable for operation on 400 (+)/-) 10% volts, 50 cycles/second, 3 phase AC electric supply. The power of electric motor should be at least 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-) 25% of the duty point head. The motor should be as per IS: 325-1978 with up to date amendments read with IS: 900-1972. It should include cost of bearing nuts, bolts and pointing etc. and should meet the following requirements:- | 1 | 1 Set of 60 HP | - | - |
| 1.01 | Discharge (Q) : - 7.250 LPS | - | - | - | - |
| 1.02 | Total dynamic head : 297 mtrs. | - | - | - | - |
| 1.03 | (a) LWL in sump well (h) : | - | - | - | - |
| 1.04 | (b) Shaft level : | - | - | - | - |
| 1.05 | (c ) Level at discahrge point : | - | - | - | - |
| 1.06 | (d) Suction lift : | - | - | - | - |
| 1.07 | (e) Residual head : | - | - | - | - |
| 1.08 | (f) Static head : | - | - | - | - |
| 1.09 | (i) Rising Main : | - | - | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.21 MB
PWD6.pdf
Tender Documents • 0.26 MB
PWD8.pdf
Tender Documents • 0.98 MB
TandC.pdf
Tender Documents • 1.13 MB
BOQ_208239.xls
BOQ • 1.83 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .