Widening of Pipraich Bargadhi road Via Sirsiya Village to Sirsiya Mahadev Mandir road by Interlocking With 5 Year Maintenance LOT 1 of 1

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m As per MoRT&H Specification & Clause . No.301, 3.06 complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.as per MORT&H Specification & Clause No.401, 4.01 complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days (using batching Plant) As per MoRT&H Specification Ref. No. 2100 & Sr No. 12.04 sub-analysis-21.02 using Batching plant (Including Labour Cess but GST will paid extra as applicable)

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications As per MoRT&H Specification Ref. No. 1300& 2200 & Sr No. 13.01(Including Labour Cess but GST will paid extra as applicable)

2 CM (3/4") thick damp proof coarse with cement and. approved coarse sand in proportion of 1:2 and including water proofing materials as ordered by the Engineer-in-Icharge in the proportion as specified by the manufactuers including supply of all materials, labour and T&P etc. required for proper completion of the work and including proper curing and shuttering as necessary.As per Sor No. 360 (Including Labour Cess but GST will paid extra as applicable)

Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504. Sr No. 6.7(Including Labour Cess but GST will paid extra as applicable)

Electric Light on Octogonal Victoriam Pole Both Side of Road @25 mtr center to center.:- Supply & fixing of 7 mtr C.I Octagonal Victorian Pole with C.I base antique copper outer colour of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikess with Double arm bracket (1 Mtr length each) on RCC foundation including the cost of foundation, foundation bolts excavation & back filling and Required T&P complete in all respect weight 180 kg. (Including Labour Cess but GST will paid extra as applicable)

Supply and fixing of LED street light fitting with mandatory driver set having die cast aluminium body and lenses suitable for 140 Watt to 150 Watt and confirming to IP66 protection having company LOGO engraved complete in all respect including labour CAT-AAA as per P.S.No.1425 (Including Labour Cess but GST will paid extra as applicable)

S/F of 2 no. SPMCB for controlling of street light, including cost of din mounting rail, connecting streep, earth link etc.complete in all respect. (Including Labour Cess but GST will paid extra as applicable)

Making connection of each street light fitting by S/L 2.5 sqmm 3 core flexible copper cable from pole busbar box to street light fitting.as per P.S.No.289(p) (Including Labour Cess but GST will paid extra as applicable)

Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer Gl pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to JOO micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 Gl. strip will be extra) Make: As approved in U.P. P. W.D., & C.P.R.I. Certified.as per P.S.No.725(a) (Including Labour Cess but GST will paid extra as applicable)

S/L of 25mm x 3mm Gl strip as per P.S.No.716 (Including Labour Cess but GST will paid extra as applicable)

Numbering of pole by letter writing (number named, agency, UPPWD) with cost ofpaint & needed T & P (Including Labour Cess but GST will paid extra as applicable)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of75 mm. thick sandall around and protected with bunt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(25 Sqmm x 31/2 core cable) as per P.S.No.501(j) (Including Labour Cess but GST will paid extra as applicable)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of75 mm. thick sandall around and protected with bunt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(150 Sqmm x 31/2% core cable) as per P.S.No.501(p)(Including Labour Cess but GST will paid extra as applicable)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of75 mm. thick sandall around and protected with bunt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(300 Sqmm x 31/2% core cable) as per P.S.No.501(s) (Including Labour Cess but GST will paid extra as applicable)

S/F of Brass Nikil plated compression gland as ( 25 Sqmm x 31/2'/core cable) as per P.S.No.503(j) (Including Labour Cess but GST will paid extra as applicable)

S/F of Brass Nikil plated compression gland as(150 Sqmm x 31/2/core cable) as per P.S.No.503(p) (Including Labour Cess but GST will paid extra as applicable)

S/F of Brass Nikil plated compression gland as (300 Sqmm x 34core cable) as per P.S.No.503(s) (Including Labour Cess but GST will paid extra as applicable)

S/F of plain or pin type copper tin plated cable socket (Lugs) (16 Sqmm) as per P.S.No.504(d) (Including Labour Cess but GST will paid extra as applicable)

S/F of plain or pin type copper tin plated cable socket (Lugs) (25 Sqmm) as per P.S.No.504e (Including Labour Cess but GST will paid extra as applicable)

S/F of plain or pin type copper tin plated cable socket (Lugs) (70 Sqmm) as per P.S.No.504(h) (Including Labour Cess but GST will paid extra as applicable)

S/F of plain or pin type copper tin plated cable socket (Lugs) (150 sqmm) as per P.S.No.504(k) (Including Labour Cess but GST will paid extra as applicable)

S/F of plain or pin type copper tin plated cable socket (Lugs) (300 sqmm) as per P.S.No.504(n) (Including Labour Cess but GST will paid extra as applicable)

S/F of Main feeder pillar with over voltage and under voltage relay with auto resetting manufactured using 1.9/1.6 mm thick CRCA Sheet steel with powder coated paint double door with canopy base channe Iwith cable gland entry from bottom for cable using suitable alluminiwn busbar with provision of incoming & outgoing MCCB of L&T /Schneider/GE/ABB make installation of feeder pillar ofsuitable c.c foundation (All MCCB to be Rotatory handle type) INCOMING-200A 4Pole MCCB-1 NO. OUTGOING-63A 4Pole MCCB-3 Nos as per P.S.No.812B(ii) (Including Labour Cess but GST will paid extra as applicable)

S/F of Sub feeder pillar with over voltage and under voltage relaywith auto resetting manufactured using 1.9/1.6 mm thick CRCA Sheet steel with powdet coated paint double door with cariopy base channel with cable gland entry from bottom for cable using suitable alluminium busbar with provision of incoming & outgoing MCCB ofL&T /Schneider/MDS/GE/ABB make installation of feeder pillar ofsuitable c.c foundation (All MCCB to be Rotatory handle type) INCOMING- 100A 4Pole MCCB-1 NO OUT GOING-63A 4Pole MCCB-1 No, 32A 4Pole MCCB-2NO as per P.S.No.811C(ii) (Including Labour Cess but GST will paid extra as applicable)

S/Laying of 4 dia Gl Pipe B-Class (Including Labour Cess but GST will paid extra as applicable)

Charges for Cutting of footpath including rent of T&P needed and disposal ofrubbish material for away from site and dumping area (Size 1.5mX 1mX0.50m)(Including Labour Cess but GST will paid extra as applicable)

Charges for repairing of footpath with cost of material cement sand & rent of T&P and painting in original surface(Including Labour Cess but GST will paid extra as applicable)

Labour charges for cutting of road 50cm below ground surface and laying of MS pipe with cushion ofgrit and cement mortar (Including Labour Cess but GST will paid extra as applicable)

Labour charges for repairing of road by mixing grit & tarcoal and filling the propper patch with cost oftarcoal & grit (Including Labour Cess but GST will paid extra as applicable)

Labour charges for Laying of Cable by Horizenta! Drilling Machine as required at site (Including Labour Cess but GST will paid extra as applicable)

Maintenance of constructed road for next five year after completion of work shall be paid. as per GO No 17/2024/lk0-113/23-1-2024-23-1099-113/2023 yksd fuekZ.k foHkkx vuqHkkx&1 fnuakd 16-01-2024 ,oa dk;kZy; izeq[k vfHk;Urk ;krk;kr oxZ yks0fu0fo0 y[kuÅ dk i=kad&3689lh&vks0ih0vkj0,e0lh0@ewy&23&24 fnuakd 17-02-2024- Payment shall be done as per satisfaction of engineer in chage regarding maintenance work carried out by contractor (Including Labour Cess but GST will paid extra as applicable). 1st year Maintenance cost total construction of cost Item No. 1 to 6 Rs. 6256100.00 @ Zero percent & for 2nd year @ 0.75%

For 3rd year @ 0.50%

For 4th year @ 0.75%

For 5th year @ 1.00%

Please Enable Macros to View BoQ information