Improvement of junction, installation of street light/high mast light, construction of road side drainage etc. on accident prone locations of NH-162E km 0/000 to 88/800

Providing and erecting "W" Metal Beam Crash Barrier — 3mm thick corrugated sheet metal beam rail, 70cm above road/ground level, fixed on CRC rolled channel vertical post 150x75x5mm spaced 2m c/c, 1.8m high (1.1m below ground level), all steel parts hot-dip galvanized, fittings conforming to IS:1367 & IS:1364, beam rail fixed with spacer channel 150x75x5mm, 330mm long

Earth work in excavation for foundation of structure completewithall lift, dewateringshoringandshuttering etc. .including refilling of trenches in 25.mm layers, ramming, wateringanddisposal of surplussoilwithina lead of 1000 meters, as per drawing and technical specification.[MoRTH Specification : Clause : 304] in hard soil upto depth of 3m

Providing and laying Plain Cement Concrete (PCC) of M15 grade with 20 mm nominal size stone aggregate, mechanically mixed and vibrated, in foundation up to a depth of 1.50 m below ground level and/or 1.50 m above ground/bed level, complete as per specifications.

Providing and laying Random Rubble stonemasonry incement sandmortar 1:3, in foundation up to a depth of 1.50 meters and also 1.50 meters above Ground /Bed level [MoRTH Specification : Clause 1000/1400]

Providing and fixing precast cement concrete coping of 1:2:4 mix, 50 mm thick, complete as per specifications.

Providing raised and cut pointing to stone masonry in cement mortar of proportion 1:3, complete as per specifications.

Providing and laying of marking of centre line, stop line, etc. with hot thermoplastic compound of approved quality with Type-1 glass beads (Table 800-9), 2.5 mm thick on road/plain surface, including reflectorising glass beads Type-2 (Table 800-10) @ 250 gms per sq. m area with special applicator machine, as per IRC:35, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. The finished surface shall be level, uniform and free from streaks and holes, as per Clause 803 of MoRTH Specifications, including all materials, labour, machinery, lighting, guarding and maintenance of diversion.

Earth work in excavation, including stacking/disposal of surplus material with all lifts and lead up to 50 meters, exclusive of compensation of earth [MoRTH specification : Clause 301 to 305] In Hard Soil Hard rock with lead up to 50m,and lift up to 0.5m

Raised Payment Marker (Cats Eye): Supplying and Fixing of Molded Shank Raised Pavement Markers made of ABS Moulded body and Polycarbonate Reflective panels with Micro Prismatic Lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 35000 Kilogram tested in accordance to ASIM D 4280 & ASTM D 788. The Height of Road Stud is 20mm, Width 100mm, Length 100mm and minimum reflective area of 13 sqcm on each side.The Strength of detachment of the integrated cylender shank not less than 14+/-2mm (Thickness) and height not less than 30+ 2mm from the body. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive

Providing and laying Granular Sub-Base (GSB) material having Plasticity Index (P.I.) not more than 6, including spreading in layers not exceeding 150 mm compacted thickness and consolidation with 8–10 tonne power roller to the required camber and grade, including the cost of water, hire charges of machinery, T&P and all leads, complete as per MoRTH Specifications and conforming to Tables 400-1 and 400-2. (Compacted thickness shall be measured.) gdrading III