Karnataka

AOC

Works

Water supply/sewage lines

Providing 305 FHTCs at RATNAPUR Habitation of TAJAPUR H Villages of Vijayapur Taluka covered under MVS Tikota & other 23 villages of Vijayapur taluka 88 LPCD

Rural Drinking Water and Sanitation Department

RWSSD Division Office Vijayapura | Vijayapura, Karnataka

Amount: ₹43.4 LCloses: 9 Dec 2025Closed

Timeline

Published24 Nov 2025
Closed9 Dec 2025
Awarded—

Bids

1 Bid9 Dec 2025

#	Company	Amount	Status
1	BAPUGOUD KALLAPPA HADAGALLA ₹36.5 Laccepted-aoc	₹36.5 L	accepted-aoc

Tender Value

₹43.4 L

EMD Value

₹87,000

Closing Date

9 Dec 2025, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Drinking Water and Sanitation Department

Contact Person

EE RDWSD

Office Number

Work Description

Providing 305 FHTCs at RATNAPUR Habitation of TAJAPUR H Villages of Vijayapur Taluka covered under MVS Tikota & other 23 villages of Vijayapur taluka 88 LPCD

Tender Information

Tender ID

RWSSD/2025-26/WS/WORK_INDENT9224

Reference Number

RWSSD/2025-26/WS/WORK_INDENT9224

Tender Type

Open

Product Category

Water supply/sewage lines

Form of Contract

Two Tender Document System(Two Cover)

Location

RWSSD Division Office Vijayapura

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredPAN Card & GST Registration copy

RequiredExisting commitments and on-going works

RequiredAccurate postal address, Principal place of address, Mobile Number and email address should be mentioned clearly

RequiredLINE OF CREDIT

RequiredWork done certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Liquid assets and /or availability of credit facilities of no less than 30% of the amount put to tender (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc in the prescribed format mentioned in the KW document (Conditional Liquid assets and /or availability of credit facilities will not accept. Tender will be rejected)

The Bidder shall ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date of bid submission.

First Technical bid will be open, and send to the competitive authority. Next the Financial Bid will be open for those who will be qualified in Technical bid.

Contractor Conditional tenders are not accepted

The authority competent to accept the tenders shall have the right of rejecting all or any of tenders without assigning any reasons.

Quality control certificate issued from the QC authority must accompanied with bill.

All the items in the tender are inclusive of cost and conveyance of all materials, all lead, lift, loading, unloading, transportation, labour, hire charges of machinery, curing for concrete works.

As per Karnatka State Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter No.PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare Fund.

The work should be executed strictly as per the detailed tender specification mentioned. Contractor should arrange for quality check at different stage of work for quality assurance as per direction of Engineer-in-charge during the work in progress and after completion. If any failures found the cost will be recovered from the contractor.

The work should be carried out in accordance with the standard specifications specified by the department.

This work should be inspected by the 3rd party Agency.

Any damage during the progress of work, the damage cost should be born by the Contractor.

The tendered should submit proposed methodology and program of construction, backed with equipment and materials duly supported with broad calculations and quality management, plan, proposed to be adopted, justifying of execution and completion of the work as per technical specifications within the stipulated period of completion.

Tenderers are requested to read the Bid Documents before submission of their bid.

Contractors should follow strictly prevailing rules of labour act.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders.

Corrigendum/ addendum will be published in the web site only

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer, RWSD, Vijayapur is final.

In the case of the death of the contractor after executing the agreement/commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and complete the work at the accepted tender rates irrespective of the cost of the work.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer is not responsible for any delay in accessing kpp Portal. The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

If the date mention above happens to be general holiday next working day will holds good in lieu of the date mention.

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender

Any objection regarding the tender must be submitted directly to Executive Engineer , not in inward.

The P.V.C/H.D.P.E. & D.I. pipe which are used in this scheme should obtain the quality testing certifiate from Third party.

The authority competent to accept the tenders shall have the right of rejecting all or any of tenders without any substantial reason.

If any information or document furnished by the bidder are found to be misleading or also at any stage his tender shall be cancelled and steps will be taken to black list the said bidder and legal actions will be taken against the bidder as per KTPP act and IPC Sections.

Security deposit for Unbalanced tender should be made in favor of Executive Engineer in the form of FDR should be pledged in the name of Executive Engineer issued by Nationalized bank only. & it should be submitted at the time of agreement

GST shall be paid to the Tendered amount separately

For HDPE,MDPE & PVC pipes Quality control reports should obtained from CIPET. (at contractors own cost)

This tender is covered under World Bank Guidelines on Preventing and Combating Fraud and Corruption in Program for Results Financing dated February 1, 2012, and revised on July 10, 2015 Requirements under these guidelines include but are not limited to (a) the borrower obligation on informing the World Bank about all Fraud & Corruption related allegations and investigations, (b) the World Bank right to conduct administrative inquiries, and (c) Ineligibility of debarred firms for contract awards. The latest list of the Bank debarred firms is available online.

If the rate quoted by the contractor is lesser than the amount put to tender,the Difference cost should be paid by the contractor,through FDR in the favour of Executive engineer at the time of Agreement which is issued by Nationalized bank only.

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

Past Experience

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs.21.63 (80% of estimated cost of tender)

Work Done Certificate

Capabilities of Vendor

The Tenderer should submit the Unconditional line of credit from Banker of a Nationalized Bank/Scheduled Bank/liquid assets amounting to 30% of amount put to tender i.e., of Rs 12.98 Lakhs

Line of Credit

PAN Card & GST Registration copy

GST Registration

Accurate postal address, Principal place of address, Mobile Number and email address should be mentioned clearly

Others -- Accurate postal address

A Self Declaration stating that all the information provided by me is true and correct. Executive Engineer RDW&S Division Vijayapur (employer) can cancel my tender and employer can also file a criminal case against me in the court if the employer found information provided by me is false or incorrect.I have gone through all the Tender conditions as well as site conditions and accepted them without any pre conditions

Others -- Self Declaration

The Tenderer should possess valid registration of appropriate Class with PWD CLASS III and above. Department

PWD Registration Certificate (Class I/II/III/IV)

Information on works for which tenders have been submitted and works which are yet to be completed as on the date of this Tender: (A) Existing commitments and on-going works-Tenderer must submit the statement regarding existing commitments and on-going works In the format prescribed in KW document countersigned by the employer in charge not below the rank of Executive Engineer or equivalent.

Others -- Existing commitments

Information on works for which tenders have been submitted and works which are yet to be completed as on the date of this Tender: (B) Works for which tenders already submitted. Tenderer must submit the statement Works for which tenders already submitted In the format prescribed in KW document.

Others -- tenders already submitted

Financial Status

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. 43.25 Lakhs)

Audited CA Certificate of Annual Turnover

Fee & Financial Details

Tender Fee Amount

₹1,090

EMD Fee Amount

₹87,000

Important Dates

Last Activity

9 Dec 2025

Published

24 Nov 2025

Bid Opening

10 Dec 2025

Download Ends

6 Dec 2025

BOQ Preview

•

Providing 305 FHTCs at RATNAPUR Habitation of TAJAPUR H Villages of Vijayapur Taluka covered under MVS Tikota & other 23 villages of Vijayapur taluka 88 LPCD

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Supplying , Fitting and placing TMT Fe 550/550 D Steel reinforcement complete as drawing and specificatin

•

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

•

Supply and fixing of Horizontal Mechanical Woltman type hemetically sealed water meters with copper Glass register with IP 68 protection. The meter shall be removable mechanism type manufactured as IS...

•

Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The ranite/trap/basalt crushed graded coarse aggregates and fine ggregates as per r...

•

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site i...

•

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

•

Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...

•

Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986

•

with latest ammendments., in position for RCC walls including hoisting

•

and conveying them to work spot with all lead and lifts et...

•

Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986

•

with latest ammendments., in position for RCC walls including hoisting

•

and conveying them to work spot with all lead and lifts et...

•

Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true

•

to line / hoisting of DI flanged pipe in position and aligning to correct

•

plumb, including cost of jointing materials, conveyi...

•

Providing 80 mm dia CI bank flange confirming to IS1538 (Part-I to XXII) 1978 with latest amendments if anycost of all materials, labour charges etc. complete 80mm Dia duck foot bend

•

Bell Mouth 80mm dia

•

Puddle flasnge Pipe 80mm dia

•

Double flange bend 80mm dia

•

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...

•

Applying one coat of water thinnable cement primer of approved brand

•

and manufacture on wall surface :Water thinnable cement primer to give

•

an even shade after thoroughly brooming the surface to r...

•

Finishing walls with water proofing cement paint of required shade :New

•

work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after

•

thoroughly brooming the surface to remove all dirt, d...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

Providing and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40m...

•

Providing and fixing 40mm dia. GI pipe medium duty pipes hand railing

•

3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and

•

100x150mm at top, placed at 2 Mtrs. intervals for a height o...

•

Ladder inside the container: Providing anodized aluminium ladder

•

using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x

•

25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed a...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution light...

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

•

Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications forCutting in Cement concrete road surfa...

•

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and onveying to work site including loading and unloading at both destinations and ...

•

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...

•

Supply and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, design ...

•

Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work si...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1...

•

Labour charges for attending to repairs to the PVC pipes by earth work excavation cutting the old pipe installation and jointing of new pipes to the existing old pipe to the depth and line, level and ...

•

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size m...

•

Providing and fixing Chlirinated chloride (CPVC) pipes, having thermal stability for Hot and Cold water supply including all CPVC plain & brass threaded fittings this includes jointing of pipes & fitt...

•

Supply and delivery at site special moulded variety PVC elbows as per

•

IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with

•

its latest amendments

•

Supplying of special moulded variety PVC couplers as per IS 7834/

•

1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest

•

amendments to walk site etc. complete

•

Providing & fixing electro fusion saddle comply with Bs EN12201 -3:2011, PN-12.5 rating andfood grade raw material as per BS 6920 with material of construction PE 80 or PE 100 andcolour of fitting - B...

•

Providing and fixing brass bib cock of approved quality

•

Flow controll valve 5LPM/10LPM/15LPM : providing and fixing flow control valve using food grade materials SS 316 ball/1/2" (15 mm) including cost of all materials, labour charges HOM & testing comple...

•

Providing and laying in position Cement Concrete for levelling course for

•

all works in foundation. The granite/trap/basalt crushed graded coarse

•

aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for levelling course for

•

all works in foundation. The granite/trap/basalt crushed graded coarse

•

aggregates and fine aggregates as per relevant IS Codes...

•

Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...

•

Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200m...

•

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

•

Supplying , Fitting and placing TMT Fe 550/550 D Steel reinforcement complete as drawing and specificatin

•

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

•

Supplying , Fitting and placing TMT Fe 550/550 D Steel reinforcement complete as drawing and specificatin

•

Painting with synthetic enamel paint of approved brand and

•

manufacture to give an even shade :Two coats on new work after

•

thoroughly brooming the surface to remove all dirt, dust, mortar

•

drops and for...

•

Lettering with black Japan paint of approved brand and

•

manufacture to give an even shade including preparing the surface

•

after thoroughly cleaning the surface to remove all dirt, dust and

•

foreign matt...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Ratnapur revised Estimate.pdf

Others - ESTIMATE • 8.45 MB

Ratnapur Bid Doc.doc

Tender Document • 1.03 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

BAPUGOUD KALLAPPA HADAGALLA

₹36.5 Laccepted-aoc