REPAIR TO DOORS, WINDOWS, WALL PANELLING, FLOORING GLASS PANES AND MISC ITEMS FOR STN HQ AND MINOR UNITS UNDER AGE(I) REASI

Amount

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete, all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete, all as specified and directed.

Taking down shutters of any description exceeding 1 square metre not exceeding 2 square metre each, complete, all as specified and directed.

Taking down shutters of any description exceeding 2 square metre each, complete, all as specified and directed.

S&F factory made pressed steel door frames 1.25mm thick PBI sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete, of frame size 125 x 60 mm, including tarring with ends and back of chowkhats and lugs including back fillingof PCC 1:3:6 for chowkhats & PCC 1:2:4 for block for hold fast and also painting with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete, all as specified and directed.

S&F 35 mm thick factory made, 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete, all as specified and directed.

S&F 2nd class hard wood glazed and skeleton shutters, 35mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and itred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete, all as specified and directed.

S&F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, commercial type of one side sides and another face is covered with aluminium sheet 0.50mm thick and fixed with aluminium alloys screws, complete, all as specified and directed.

Preparation of new wood or wood based surfaces of any discription not otherwise described exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete, all as specified and directed.

Supply and fix steel windows / ventilator with tubular frame factory made with double shutter (wire gauged shutter and glass / glazed shutter, (wire cloth and glass panes shall be ameasured and paid separately) of sixe 79 mmx 39 mm, 16 gauge rectangular tubular frame with side hung shutter with glazing bars 12 x 3 mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100 mm long and 10 mm square bar grills complete, twlo coats of synthetic enamel paint over one coat of red oxide primer including taking down old windows / ventilators all as specified and as shouwn on drg CEUZ/TD/1269/2008 HT 1/1 to 1/3 Note: Wire cloth and glass panes will measured and paid speperately.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification in SSR-II, complete, all as specified and directed.

S&F Factory made solid PVC moulded door shutter (particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete, all as specified and directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,140mm overall length of cover plate fixed in floor complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.0mm and fixed with tinned tacks, or galvanised wire staples, complete, all as specified and directed.

S&F Powder coated anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete, all as specified and directed.

S&F Powder coated anodised aluminium door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete, all as specified and directed.

S&F Powder coated anodised aluminium window and ventilator shutters (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), complete, all as specified and directed.

S&F Aluminium handles cast type, anodised, 150 mm size, complete, all as specified and directed.

S&F Aluminium handles cast type, anodised, 125 mm size, complete, all as specified and directed.

S&F mild steel cold rolled butt hinges medium weight 100 mm long, complete, all as specified and directed.

S&F Aluminium alloy, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete, all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, complete, all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, complete, all as specified and directed.

S&F mild steel, 300 mm, ordinary rat tail rod pattern door spring including roller and roller plate, complete, all as specified and directed.

S&F 5.5mm thick sheet glass, ordinary quality as in window and door shutters fixed with rubber gasket and anodised aluminium snap beading/glazing clips, complete, all as specified and directed.

M&L Securing glass of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work, complete, all as specified and directed. Note:- New length of frame reputtied shall be measured

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete, all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete, all as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling (Size of grid 605x605mm), complete, all as specified and directed.

S&F 7mm thick designer mineral fibre board ceiling fixed or laid/ inserted in snap grid ceiling , complete, all as specified and directed. Make: Armstrong (beauty sky in white) or equivalent, make and design as approved by Engineer-In-Charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame, complete, all as specified and directed.

S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete, all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete, all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level), complete, all as specified and directed.

M&L Non-skid coloured ceramic (square or rectengular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 10mm thick screed bed in CM 1:6 over 25 mm thick PCC 1:2:4type B0 complete all as specified and directed

M&L Non-skid coloured ceramic (square or rectengular) 7 to 8 mm thick, area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 10mm thick screed bed in CM 1:6 over 25 mm thick PCC 1:2:4type B0 complete all as specified and directed

M&L Vitrified coloured ceramic double charged tiles 10 mm thick, area of each tile exc 0.36 sqm but not exc 0.42 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B0, complete, all as specified and directed.

Material and Labour Glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl 10 MM thick plaster in CM 1:4, complete, all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in lime/cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete, all as specified and directed.

Material and Labour brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete, all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, complete, all as specified and directed.

M&L 10 mm thick rendering other than fair faces of brick /stone masonary surfaces on walls in cement mortar 1:4 and finished even and smooth without using extra cement, complete, all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick/concrete surfaces in cement mortar 1:4 mixed with water proofing compound and finished even and smooth without using extra cement, complete, all as specified and directed. Note: Water proofing compound shall be measured & paid seprately.

Supply only integral water proofing compound conforming to latest IS specifications. (Make: Dr. Fixit, Pidilite)

Preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of 1mm birla white putty, complete, all as specified and directed.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a priming coat of alkali resistant paint including necessary base preparaion, complete, all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof covering, complete, all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete, all as specified and directed.

Supply and Fixed in repairs fancy type bib taps 15mm, cast copper alloy cromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed , complete, all as specified and directed.

Supply & fixed in repair pillar taps 15 mm, cast copper alloy , with capstan heads, chromium plated, screwed down, high pressure with or without lettered, 'hot' or 'cold', with long screwed shank and fly nuts, screwed for iron pipe and fixed complete, all as specified and directed.

S&F in repair in repairs 15 mm bore, CP Stop valves concelaed type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup complete all as specified.

S&F in repair in repairs 15 mm bore fancy type, CP Stop valves concelaed type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup complete all as specified.

S&F gratting doom 125mm dia square or round of PTMT, complete, all as specified and directed.

S&F in repairs CP Brass shower rose for fixing with 15mm bore pipe of size 125mm with swivel joints any size , complete, all as specified and directed.

S & F PVC connections 15mm size 600 mm long as fixed in repairs Charge.

S&F in repairs brass valves 20mm bore, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete, all as specified and directed.

S&F in repairs brass valves 15mm bore, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete, all as specified and directed.

Dismantling water tank of capacity exceeding 250 liters but not exceeding 500 ltrs and removing to stores, complete, all as specified and directed.

Dismantling water tank of capacity exceeding 500 liters but not exceeding 1000 ltrs and removing to stores, complete, all as specified and directed.

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified of capacity 1000 liters including all accessories, complete, all as specified and directed. Make : star/Syntex/fusion

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified of capacity 500 liters including all accessories, complete, all as specified and directed. Make : star/Syntex/fusion

S&F 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, with inlet, ball valve, float and handle including brackets, , complete, all as specified and directed. Make : Parryware Cat No C8297 Slimline standard or equivalent.

S&F in repairs vitreous china pedestral pattern type white wash down water closter pan with Antimicrobial Solid Seat Cover Code No. C8094 but excluding flushing cistern and flush pipe of Make Parryware "Niagara' Code NO. C0252 or equivalent.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including a provision of concrete bedding, complete, all as specified and directed. Make : Parryware Cat Part No. C0117 or equivalent.

S&F in repairs Tubular towel rail, 20mm dia D type 60cm long between flanges complete all as specified

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete, all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete, all as specified and directed.

S&F in repairs PVC (SWR) bends 75 mm dia radius complete all as specified and directed.

S&F in repairs PVC (SWR) bends 110 mm dia radius complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl 75 mm dia radius complete all as specified and directed.

S&F vitreous in repair vitreous China wash basin, white, flat back, size 550x400mm excluding tap, waste pipe of 32mm dia and waste fittings, Pillar tap brass, chromium with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

Taking up or down 15mm bore steel tubing with connections for cleaning for refixing or removing to store yard, complete, all as specified and directed.

Taking up or down 20mm bore steel tubing with connections for cleaning for refixing or removing to store yard, complete, all as specified and directed.

S&F 15mm bore galvanized steel tubes, medium grade for flush pipes, water supply pipers etc, fixed to walls and ceiling or laid in floors (make : Jindal or equivalent)

S&F 20mm bore galvanized steel tubes, medium grade for flush pipes, water supply pipers etc, fixed to walls and ceiling or laid in floors (make : Jindal or equivalent)

Note:- Deduction for Schedule of credit (Sch 'A' Part-II) to be made of ₹ 18485.00 from the total quoted amount of BOQ while accepting the bid. Details of schedule of credit is given in tender documents.

RAVI KUMAR

m/s vaid contractor and builders