REPAIR/REPLACEMENT OF FLOORING, JOINERY, PLASTERING, SANITARY FITTINGS, ROOF TREATMENT AND FALSE CEILING IN ZONE C AREA UNDER GE CHENNAI

Amount

M&L for brick work straight or curved on plan exceeding 6 metre mean radius using fly ash bricks built in cement mortar (1:6) all as specified and directed.

M&L for brickwork with fly ash bricks straight or curved on plan to any radius in half brick thick walls in cement mortar (1:4) complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including 20mm thick screed bed in CM (1:4) (cutting & polishing including provision of hole for gas pipe )including dismantling the old stone complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area n. exc. 1.5 sqm each along with fittings including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but n. exc. 4.0 sqm each along with fittings including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each including fittings complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each including all fittings complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought, framed, rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on Front and back face, supplying and fixing in frame at site complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred cut at two corners and joined by inserting two No. 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall by drilling and providing 100mm long MS screws with PVC fasteners complete all as specified and directed.

S&F 2nd class hardwood plain framed panelled door shutters 35mm thick, (any No of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned & chemically treated and fitted to chowkats complete all as specified and directed.

S&F 2nd class hardwood glazed and skeleton door shutters 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.24(a) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and directed.

S&F for 2nd class hardwood glazed and skeleton window/ ventilator shutters 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.24(b) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 125mm long all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as specified and directed.

S&F in repairs aluminium anodised barrel tower bolt of extruded section 125mm long all as specified and directed.

S&F in repairs aluminium anodised barrel tower bolt of extruded section 200mm long all as specified and directed.

S&F aluminium alloy anodised sliding door bolts 300mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F mild steel butt hinge, medium weight cold rolled 75mm size all as specified and directed.

S&F mild steel butt hinge, medium weight cold rolled 100mm size all as specified and directed.

S&F in repairs mild steel butt hinge, medium weight cold rolled 75mm size all as specified and directed.

S&F in repairs mild steel butt hinge, medium weight cold rolled 100mm size all as specified and directed.

S&F continuous piano hinge mild steel bright finish or elactro-galvanized width of flap (when open) 30mm complete all as specified and directed.

S&F inrepairs continuous piano hinge mild steel bright finish or elactro-galvanized width of flap (when open) 30mm complete all as specified and directed.

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples complete all as specified and directed.

All as per item No. 25.00 above but fixed in repairs.

S&F extruded aluminium alloy handle cast type anodised 125mm size all as specified and directed.

S&F extruded aluminium alloy handle cast type anodised 150mm size all as specified and directed.

S&F in repairs extruded aluminium alloy handle cast type anodised 125mm size all as specified and directed.

S&F in repairs extruded aluminium alloy handle cast type anodised 150mm size all as specified and directed.

S&F in repairs aluminium (Die cast) body door closer hydraulically regulated, designate No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg all as specified and directed.

S&F floor mounted door closer, heavy duty with pivot and connected accessories, satin stainless steel finish, sustainable for long duration and suitable for 12mm thick toughened glass shutters all as per BTS 80 series of Dorma or equivalent of PAG or any other reputed make as approved by GE fixed in repairs complete all as specified and directed.

S&F in repair floor locking arrangement with brass lock and complete accessories suitable for 12mm thick toughened glass door with complete accessories of make Dorma/ PAG or other reputed make as approved by GE complete all as specified and directed.

S&F designer curtain rods(Draw berms rods) exterior grade 3mm thick with holding clamps and fixed to wall PVC rawl plug and brass screws, all as specified and as directed including taking down the existing curtain rod of any description complete all as specified and directed.

S&F designer brackets for curtain rod (Draw berms rods) all as specified and directed.

M&L for mild steel work in bands, straps, supports of stays, sunshade brackets, hook and pintle hinges, clamps, hold fasts, guard bars, grills bolts etc and similar conforming to FE-290, Gde E 165 complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering fixed with self tapping screws as per manufacturer’s instruction complete all as specified and directed.

S&F Rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Grade Fe 410-W(Gde-E- 250) quality A complete all as specified and directed.

S&F inrepairs Steel rolling shutters of lath thickness 1.00mm, without ball bearing, as specified including top cover, anchoringrod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.

S&F Ball bearing for rolling shutters, incl taking down & refixing properly after greaseing of material etc complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Taking down Aluminium doors/windows incl shutters of any description and resecuring the same opening after repaiting necessary jointing cleats glazing clips, rubber packing anodised aluminium snap beads, screw, roller inter locking handles, hinges, neoprene packing complete as specified and directed. (Glass pane, wire gauge, floor spring & door closers measured and paid seperately).

S&F anodized aluminium powder coated (minimum thickness of powder coating 50 micron) side hung window shutter with sash bars of aluminium section for frame work not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beads, screws, roller interlocking handles etc. complete all as specified and directed. Note: Glass pans and wire mesh will be measured and paid for separately.

S&F anodized powder coated aluminium (minimum thickness of powder coating 50 micron) frames for doors, windows and ventilator with one or more rebates including joining cleats for fixing complete all as specified and directed.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

S&F anodized aluminium powder coated (minimum thickness of powder coating 50 micron) panelled door shutter of aluminium section for frame work not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber neoprene packing, 2 No. 150mm long handles, 02 No. 200mm long tower bolts, 03 No. aluminium B21 hinges and 01 No. aluminium mortice lock in each door, fully glazed for providing glass panes, prelaminated particle boards etc. including anodised aluminium snap beads, screws etc. complete all as specified and directed. Note: Glass panes and prelaminated particle board shall be measured and paid for separately under appropriate item of this BOQ.

S & F fully glazed door shutters made out of 12mm thick toughened glass suitable for opening not exc 1.2m wide as approved by GE, drilling holes for fixing handles incl provision of stainless steel matt finish handle 400mm-02 Nos, suitable locking arrangements, centre lock, stainless steel body floor spring, patch fittings consists of bottom patch, top patch and top pivot with stainless steel fixing plate etc., complete incl taking down old unserviceable glass door all as directed by the Engineer-in-charge. Note: the unit rate quoted shall be deemed to include all necessary builders hardware except door closer.

S&F pre-laminated particle board 18/ 19mm thick, interior grade pre-laminated on one side with decorative choice lamination and other side balancing white lamination fixed with screws as in cupboard shutters and shelves etc. fixed in repairs complete all as specified and directed.

S&F pre-laminated particle board 9mm thick, interior grade pre-laminated on one side with decorative choice lamination and other side balancing white lamination fixed with screws as in cupboard shutters and shelves etc. fixed in repairs complete all as specified and directed.

M&L providing Gypsum board false ceiling using 9mm thick Gypsum board tiles of size 60cm x 60cm with aluminium laminate finish on one side and vinyl laminate finish on other side, fixed with screw on snap grid frame work using 'T' and angle sections made out of aluminium sections bent to shape required as in main member, secondary members, perimeter angle section including provision of GI wire suspender of size not less than 4mm dia fixed to roof members @ 1200mm c/c both ways complete all as specified and directed. Note: The unit rate quoted shall be deemed to include the cost of taking down and re-fixing of the electrical fittings such as ceiling fan, light fittings etc. and safe custody of same till re-fixing complete.

M&L 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing the debris outside MD land and rubbish of the premises complete all as specified and directed.

M&L for vitrified light shade coloured ceramic tiles of grade B-1(a) 8 to 10mm thick (Square/ Rectangle) area of each tiles n. exc. 0.36 sqm in floors etc.; set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.

All as per item No. 53.00 above but on vertical surfaces such as skirting, dados and risers as in steps etc. laid over and including 10mm thick rendering in cement mortar (1:3) complete.

M&L non skid coloured ceramic tiles 7 to 8mm thick Concept tiles design(square/ rectangular) area of each tiles exc. 0.06 Sqm but n. exc. 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L glazed coloured ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 300mm x 7mm thick laid on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match the tile laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7mm to 8mm thick (Square/ rectangular) area of size matching to floor tile as approved by GE, fixed in vertical surfaces such as skirtng/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tiles laid over a backing coat in cement mortar (1:3), 10mm thick on fair faces of brick or concrete surfaces complete all as specified and directed.

M&L for complete removal of the existing water proofing treatment of any description, cleaning the top surfaces of roof with wire brush and washing with hydrochloric acid to remove dust, oil, grease, loose particles etc and rendering the top surfaces of RCC roof slab with 10mm thick cement mortar 1:3 mixed with WPC and provide water proofing treatment with membrane type water proofing method using APP modified prefabricated five layer water proofing membrane matt finish 3mm thick and weighing not less than 3.6 Kg/Sqm reinforced with non woven polyester matt black finished over one coat of bitumen primer at 0.40 ltr/sqm and torch application of membrane using gas burner with 100mm overlap as per manufacturer's instructions with top most layer of surface finished with two coats of solar reflective aluminium paint @ 0.10 ltr/sqm per coat etc. including 30mm thick (average thickness) PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in padding including carrying out ponding test complete all as specified and directed.

Taking down cement plaster on brick work or stone walls etc including racking out of joint, hacking for key, scrubbing down with water etc. and removing the debris outside MD land complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick/ concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick in cement mortar (1:3) on ceiling finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in two coats i.e. 1st coat 10mm thick in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4) mixed with and including PIDI PROOF LW compound @ 200ml per bag and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified and directed.

M&L preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over 2 to 3mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior acrylic emulsion paint (Apex of Asian or Weather coat of Berger or equivalent of other specified makes) over a coat of white primer complete all as specified and directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

All as per item No.69 but in repairs including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds all as specified and directed.

S&F sheet glass 5.5mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

M&L preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of new wooden or wood based surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron works new or old treating ends of posts, back of chowkats etc with tar or coal tar black paint area tarred exc. 0.1 sqm but n. exc. 0.5 sqm each complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron works new or old treating small articles such as hold fast etc with tar or coal tar black paint area tarred n.exc 0.1sqm each complete all as specified and directed.

S&F galvanised steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc, including taking up or down the existing GI tubing complete all as specified and directed.

All as per item No. 76.00 above but 20mm bore.

All as per item No. 76.00 above but 25mm bore.

S&F 500 ltr capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F 1000 ltr capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F ball valve PTMT with epoxy coated aluminium rod for 20mm bore pipe, weight not less than 210gms, high pressure with polyethylene high density float and complete screwed for iron pipe including taking down old one complete all as specified and directed.

S&F ball valve PTMT with epoxy coated aluminium rod for 25mm bore pipe, weight not less than 455gms, high pressure with polyethylene high density float and complete screwed for iron pipe including taking down old one complete all as specified and directed.

S&F 15mm dia bib taps brass chromium plated, fancy type, long body with flange with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed in repairs complete all as specified and directed.

S&F 15mm dia brass chromium plated, fancy type bib taps long body with flange with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule fixed in repairs complete all as specified and directed. Make: Jaquar Cat No. CON-047KN or equivalent from other makes specified in particular specifications.

S&F 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes fixed in repairs complete all as specified and directed.

S&F pillar cock long neck with aerator fancy type cast copper alloy with crutch handle screwed down screwed for iron pipe or brass ferrule fixed in repairs complete all as specified and directed. Make: Jaquar Cat No. CON-021KN or equivalent from other makes specified in particular specifications.

S&F in repairs chromium plated tumbler holder as per cat No. ACN1141N of Jaquar or equivalent from other specified makes complete all as specified and directed.

S&F 15mm dia brass chromium plated angular stop cock screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed in repairs complete all as specified and directed. Make: Jaquar Cat No. CON-059KN or equivalent from other makes specified in particular specifications.

S&F in repairs 15mm dia brass chromium plated two way angle stop cock with flange, screwed down, high pressure with crutch or butterfly handle, fancy type with long shank screwed both ends for iron pipe or for union as per Cat No. 8311 of Prayag complete all as specified and directed.

S&F 15mm dia brass stop valve/ angle valve chromium plated fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed in repairs complete all as specified and directed.

S&F 15mm dia concealed stop cock including regular body of concealed stop cock suitable for 15mm pipe Jaquar Cat No. ALD069FT and expose part kit of concealed body cock with operating lever Cat No Jaquar CON 069FTK fixed in repairs complete all as specified and directed.

S&F in repairs 15mm Sink cock complete all as specified and directed. Make: Jaquar Cat No. CON347KNM or equivalent from other makes specified in particular specifications.

S&F in repairs overhead shower 150 x 150mm square shape with single flow ABS body chrome plated with gray face with shower arm 190mm long complete all as specified and directed. Make: Jaquar Cat No. OHS35495 or equivalent from other makes specified in particular specifications.

S&F in repairs hand shower 95mm round shape multi flow ABS body chrome plated with grey face plate complete all as specified and directed. Make: Jaquar Cat No. HSH-1739 or equivalent from other makes specified in particular specifications.

S&F in repairs CP Grating 102 mm with hole complete all as specified and directed. Make: Prayag Cat No. FT-63M or equivalent from other makes specified in particular specifications.

S&F in repairs cover for rotational moulded polyethylene water storage tank of any capacity with locking arrangement and fixed in position complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. including demolition and breaking up existing pipe complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor/ trenches etc. including demolition and breaking up existing pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. including demolition and breaking up existing pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor/ trenches including demolition and breaking up existing pipe complete all as specified and directed.

S&F inrepairs PVC (SWR) bend any radius suitable for 110mm dia pipes complete all as specified and directed.

S&F inrepairs PVC (SWR) bend any radius suitable for 75mm dia pipes complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece double (double 'Y') equal or unequal 110mm bore with access door complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece double (double 'Y') equal or unequal 75mm bore with access door complete all as specified and directed.

S&F in repairs PVC (SWR) junction single( single 'T') equal or unequal 110mm bore with access door complete all as specified and directed.

S&F in repairs PVC (SWR) junction single ( single 'T') equal or unequal 75mm bore with access door complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece single (single 'Y') equal or unequal 110mm bore with access door complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece single (single 'Y') equal or unequal 75mm bore with access door complete all as specified and directed.

M&L for PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs PVC waste coupling of size 32mm/ 40mm suitable for wash basin, kitchen sink and urinal all as specified and directed.

S&F 40mm PTMT bottle trap having minimum water seal of 25mm (Minimum weight 32mm-260gms/40mm-270 gms) fixed in repairs complete all as specified and directed.

S&F in repairs CP bottle trap (with internal partition) 32mm size with 300mm end & 190mm long wall connection pipes and wall flange as per Cat No. ALD-769L 300 x 190 of Jaquar complete all as specified and directed.

S&F vitreous china wash basin white flat back size 550 x 400mm including cutting for and pinning in the ends of bracket or erecting stand excluding tap, waste chain, plug and porcelain stopper but including brackets and 32mm dia PVC waste coupling with waste pipe fixed in repairs complete all as specified and directed.

M&L vitreous china wash down water closet pedestal pattern white with including white coloured PVC seat cover including connections to drain (or outgoing pipe) and flush pipe etc. fixed in repairs complete all as specified and directed.

Supply and fix plastic water closet seat cover, any colour closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device fixed in repairs complete all as specified and directed.

S&F vitreous china wash down water closet squatting pan Orissa pattern of size 580 x 440mm with integral foot rest (white or light coloured) including making necessary connection to soil pipes and flushing cistern fixed in repairs complete all as specified and directed.

S&F in repairs Urinal white as per Cat No. C0578 of Parryware complete all as specified and directed.

S&F in repairs inlet assembly for cistern- Duk/ Bristol/ Avon coup Clos of Parryware or other approved make complete all as specified and directed.

S&F in repairs outlet assembly for cistern- Duk/ Bristol/ Avon coup Clos of Parryware or other approved make complete all as specified and directed.

S&F inrepairs 15mm PVC connection 450mm long with PTMT nuts of superior quality all as specified and directed.

S&F PVC low level flushing cistern 10 ltr with complete accessories such as PVC flush pipe, over flow pipe etc. fixed in repairs complete all as specified and directed.

S&F toilet paper holder with flap recessed type matt chromium plated as per Cat No. 1153S of Jaquar or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs soap dish, matt finished chromium plated (MCH/ Colour CP) as per Cat No. 1131N of Jaquar or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs vitreous china wash basin of size 600mm x 450mm of Make Parryware Cube model Cat No-C844S or equivalent from other makes specified in particular specifications including 1.2m x 0.9m size, 15-18mm thick granite top over 75mm thick RCC slab with supporting wall, waste coupling, waste pipe and brackets etc. complete all as specified and directed.

S&F in repairs corner glass shelf 300mm, matt finished, chromium plated (MCH/ Colour CP) with bracket as per Cat No. ACN-1173 of Jaquar or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repair PVC cabinet mirror of size 330mm x 430mm with shelf as per Cat No. 551 of Parryware or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs stainless steel 1mm thick kitchen or laboratory sink with draining board with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs brass chromium plated wall mixer valve 3-in-1, fancy type with provision of hand shower and overhead shower both complete with 115mm long bend pipe, connecting legs and wall flange as per cat No. 281KN of Jaquar complete all as specified and directed.

S&F in repair 600mm x 450mm bevelled edged looking mirror 6mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror complete all as specified and directed.

Supply and fix in repairs health faucet (hand shower) with 1.2metre long flexible tube with wall hook, chromium plated as per Cat No. ALD-563 of Jaquar or equivalent from other specified makes all as specified and directed.

S&F in repairs Brass CP shower rose of size 125mm with swivel joints including shower arm 15mm size, 195mm long with bend of 45 degree with flange for fixing with 15mm dia pipe all as specified and directed

S&F in repairs 20mm dia tubular towel rail 'D' type 60cm long brass chromium plated fixed all as specified and directed

S&F in repairs towel rack of make Jaquar Cat No.AHS1581H or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs towel rod of make Jaquar Cat No.AKP35701PS or equivalent from other makes specified in particular specifications complete all as specified and directed.

Cleaning of service UPVC service/ over head tank exc. 250 ltr but n. exc. 500 ltr capacity and cleaning as under:- (a) Emptying the tank, cleaning the internal surface of tank with wire brushes to remove all type of depositions and then thoroughly washing it. (b) Total disinfection and sterlisation of tank hygienically cleaned and bacteria free and safe by Eco-Friendly for storage of water. Note: Date of cleaning to be written over each tank after cleaning.

All as per item No. 136.00 above but capacity of tank exc. 500 litres but n. exc. 1000 litres.

M&L chipping off loose concrete, broken plastering in chajjas, ceiling, fins and fascia carefully and applying one coat of DR FIXIT rust remover and then one coat of DR FIXIT PIDICRETE concrete MPB bonding agent and 20mm thick rendering in cement mortar (1:4) in two coats of 10mm thick each coat complete all as specified and directed. Note: Work shall be carried out at any place and building upto 10 metre height above GL.

Dismantling of structural steel work unframed as in roof members all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge and thickness including Nainital or similar pattern roof covering all as specified and directed.

Demolition of reinforced cement concrete of any description and in any situation not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above GL including removal of debris to outside MD land complete all as specified and as directed.

Demolition of brick masonary built in cement mortar including all quons, arches, pillars etc but including ashlars facings, dressed stone work and pre cast concrete articles.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets; any thickness, including cover fillets/ snap grid etc. complete all as specified and directed.

G.L.THIRUMALAI NAIDU AND COMPANY

G.JANAKIRAMAN CO