Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹67,916Accepted-AOC 1087 606 GURU NANAK ENCLAVE RAMGARH DAUN SAS NAGAR MOHALI PUNJAB | MOHALI | SAS NAGAR | PUNJAB | ₹67,916 Quoted ₹67,916.46 | L1 | Accepted-AOC L1 |
| 2 | L2₹80,482.43Rejected-Finance 6273 BLOCK G AEROCITY DISTT MOHALI | AEROCITY | MOHALI | ₹80,482.43 | L2 | Rejected-Finance higher rates |
| 3 | L3₹80,563.82Rejected-Finance | ₹80,563.82 | L3 | Rejected-Finance higher rates |
Tender Value
₹81,386
EMD Value
₹1,628
Closing Date
26 Feb 2026, 11:00 amClosed
Er Sanjay Sahni
EEPH8 Chd
Renovation of Lab Converted into Senior Officer Room at 4th Floor of Police Headquarters,Sector -9, Chandigarh. (PHS Work)
2026_CHD_90218_4
PH8/2026/2543542/12
Open Tender
Public Health Products
30 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹1,628
23 Apr 2026
20 Feb 2026
26 Feb 2026
20 Feb 2026
26 Feb 2026
20 Feb 2026
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. .17.28
Flexible pipe .17.28.2
32 mm dia .17.28.2.1
Providing and fixing soil, waste and vent pipes : .17.35
100 mm dia .17.35.1
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 .17.35.1.2
75 mm diameter : .17.35.2
Centrifugally cast (spun) iron socketed pipe as per IS: 3989 .17.35.2.2
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. .17.38
100 mm diameter .17.38.1
Sand cast iron S&S as per IS - 3989 .17.38.1.2
75 mm diameter .17.38.2
Sand cast iron S&S as per IS - 3989 .17.38.2.2
Providing and fixing plain bend of required degree. .17.39
100 mm dia .17.39.1
Sand cast iron S&S as per IS: 3989 .17.39.1.2
75 mm diameter .17.39.2
Sand cast iron S&S as per IS: 3989 .17.39.2.2
Providing and fixing heel rest sanitary bend .17.40
100 mm dia .17.40.1
Sand cast iron S&S as per IS - 3989 .17.40.1.2
Providing and fixing single equal plain junction of required degree : .17.44
Sand cast iron S&S as per IS - 3989 .17.44.1.2
Sand cast iron S&S as per IS - 3989 .17.44.2.2
Providing and fixing collar : .17.57
Sand cast iron S&S as per IS - 3989 .17.57.1.2
Sand cast iron S&S as per IS - 3989 .17.57.2.2
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : .17.60
100 mm inlet and 75 mm outlet .17.60.2
Sand cast iron S&S as per IS - 3989 .17.60.2.1
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. .17.71
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall .18.10
15 mm dia nominal bore .18.10.1
20 mm dia nominal bore .18.10.2
Providing and fixing gun metal gate valve with C.I. wheel of approved quality screwed end) : .18.17
20 mm nominal bore .18.17.1A
Providing and fixing uplasticised PVC connection pipe with brass unions : .18.21
45 cm length . 18.21.2
15 mm nominal bore . 18.21.2.1
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : .18.46
15 mm diameter bore .18.46.1
20 mm diameter bore .18.46.2
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. .18.53A
Cutting holes up to 30x30 cm in walls including making good the same: .18.76
With common burnt clay F.P.S. (non modular) bricks .18.76.1
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. .18.78
Providing drip seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : .NSR
Construction of curb consisting of cement concrete 1:2:4 including cost of C.P. hinged grating complete in all respect .NSR
Providing and fixing of C.P. Towel Ring Make Jaquar Range Continental Model ACN-1121N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC .NSR
Providing and fixing of C.P. Towel Rail 600 mm long complete in all respects make Jaquar range Continental Model ACN-1111NM or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC .NSR
Providing and fixing of Looking glass mirror 5mm thick of approved make with PVC beading 1-1/4"x3/4" with plastic Hard Board duly fixed on wall with screw / nuts/ clips/rod plug etc. complete in all respect to the entire satisfaction of EIC. .NSR
Providing and fixing of Angle Valve 15mm make Jaquar Model Continental 059KN or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC .NSR
Providing and fixing of C.P. bib cock with wall flange 15mm i/d coloured "Jaquar" make Model Continental collection complete as per Cat No. CON-047KN or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC .NSR
Providing and fixing of soap dish with 'Jaquar" make Model Continental CAT No.ACN-1131 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC .NSR
Providing and fixing of C.P. Toilet Roll Holder complete in all respects make Jaquar range Continental Model ACN-1151N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC .NSR
Providing & fixing Hand Shower (Health Faucet) (ABS Body) with 8mm Dia 1.2 Meter Long Easy Flexible Tube and Wall Hook Finish Chrome complete in all respects Make Jaquar Model ALD-CHR-573 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC .NSR
Providing and fixing of centre hole mixer without pop up waste with 450mm long copper pipes and brass nuts coloured "Jaquar" make Model Continental Cat No.CON-167KNB or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC .NSR
P/F of chinaware Two Piece wall hung EWC complete with Cistern, Seat Cover and Twin Flush Fittings of make CERA Model CRUSE/CAMBELL (Seat 2038/2099, Cistern 2118, Seat Cover 2328B, Twin Flush Fitting 2218 ) or equivalent in the same range of AOR .NSR
Providing & Fixing Table Top Wash Basin Size 550 x 400 x 140 mm Make Cera model Calburt (S2020137) complete with CP Waste or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC .NSR
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.32 MB
BOQ_111039.xls
BOQ • 0.77 MB
Download all tender documents and submit your bid