REPAIR MAINT OF HIGH MAST LIGHT STREET LIGHT TIMER PANEL AND LT CABLE POLE BOXES ETC AND CONNECTED ITEMS AND OTHER MISC WORKS AT OTM MD ACCN AT BAIRAGARH UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Taking down old defective /unservicable HPSV/MH street light fitting/ Led light fitting of any wattage for replacement with new fitting, including provision for new LED drivers for servicable LED fittings through ladder/motorised /manual system, mounted on pole/bldg, on bracket, complete all as specified and directed. Note : (i) No T &P will be issued by the Department.(ii) While execution of work, contractor must ensure proper safety precaution.(iii) The cost for new LED drivers / new LED fittings will be measured and paid seperately under respective items.

Taking down defective 150/250/400 Watt high mast / Flood light fitting consisting of SV/MH lamp (Aprox 6 to 8Nos) through ladder, /motorised /manual system, mounted on any height of high mast pole on bracket/ round ring, disconnecting,replacing with LED fitting complete all as specified and directed. Note : (i) No T &P will be issued by the Department. (ii) While execution of work, contractor must be ensure proper safety precaution be followed. (iii) The cost for new LED fittings will be measured and paid seperately under respective items.

S&F in repair Integral LED Street light luminaire with minimum system lumen of 9000, minimum system efficacy ( Not chip level) 130 Lm/watt comprising of die cast alluminium housing, voltage range should be 170-240 volts, enclosed with glass cover in frame, IP 66 with IK08 with < 10%THD, PF>0.95 with auto restart driver with EMC/EMI complaince and BIS registered report submitted by contractor and LED chip should be Cree/Nichia/Osram/Lumileads make and with all fixing arrangements, with LM79 and 80 of NABL certified Lab and nut, bolts with proper earthing connected to electric system with 2.5 sq mm PVC alluminium stranded conductor 3 core upto require length, on pole, including GI street light bracket, testing, complete all as specified and directed. Make: Philips item code : BRP062LED091CW SLC A1PSU or equivalant in Bajaj/Havells/Wipro.

S&F in repair Integral LED Street light luminaire with minimum system lumen of minimum 13000, minimum system efficacy ( Not chip level) 125 Lm/watt comprising of die cast alluminium housing, voltage range should be 170-240 volts, enclosed with glass cover in frame, IP 66 with IK08 with < 10%THD, PF>0.95 with auto restart driver with EMC/EMI complaince and BIS registered report submitted by contractor and LED chip should be Cree/Nichia/Osram/Lumileads make and with all fixing arrangements, with LM79 and 80 of NABL certified Lab and nut, bolts with proper earthing connected to electric system with 2.5 sq mm PVC alluminium stranded conductor 3 core upto require length, on pole, including GI street light bracket, testing, complete all as specified and directed. Make: Philips item code : BRP409LED 130CW SLC FG PSU GR V2 or equivalant in Bajaj/Havells/Wipro .

S&F in repair Integral LED flood light luminaire of 200W, comprising of epoxy powder coated housing, enclosed with glass cover in frame, IP 66 protection and with all fixing arangement, nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 3 core upto require length, on pole, testing and completion, complete all as specified and directed. Make : Havells CAT No. JETAIRISMAX200WLED757PWBLTG or equivalent in Bajaj/Philips/Halonix

S&F in repair Integral LED flood light luminaire of 150W, comprising of epoxy powder coated housing, enclosed with glass cover in frame, IP 66 protection and with all fixing arangement, nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 3 core upto require length, on pole, testing and completion, complete all as specified and directed. Make: Havells CAT No. JETAIFL150WLED757ARNBLTG or equivalent in Bajaj/philips/Halonix

S&F in repair Integral LED flood light luminaire of 400W, comprising of epoxy powder coated housing, enclosed with glass cover in frame, IP 66 protection and with all fixing arangement, nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 3 core upto require length, on pole, testing and completion, complete all as specified and directed. Make: Havells CAT No. JETAVALOURFL400WLED757MODWBLTG or equivalent in Bajaj

Supply only LED driver suitable for 100 watt LED light/Flood light (to suit as existing) complete all as specified and directed. Make of Driver : Bajaj or equivelent in CG/ Wipro/Halonix

Supply only LED driver for suitable of 150 watt LED flood light (to suit as existing) complete all as specified and directed. Make of Driver : Bajaj or equivelent in CG/ Wipro/Halonix

Supply only LED driver for suitable of 45 watt LED street (to suit as existing) complete all as specified and directed. Make of Driver : Bajaj or equivelent in CG/ Wipro/Halonix

Supply only LED driver for suitable of 30 watt LED street (to suit as existing) complete all as specified and directed. Make of Driver : Bajaj or equivelent in CG/ Wipro/Halonix

S&F in replacement PVC insulated PVC sheathed, flexible circular cable 3 core, 2.5 Sqmm strandered copper conductor AC, 240 V complete all as specified and directed. Make Havells/ Palza/ Polycab/Anchor

S&F in repairs Street light brackets made out of GI tubing, light grade, 32 mm bore 1200mm long, bent to shape at 120 degree, fixed on pole by providing MS clamp made up of flat iron 40 x 5 mm including bolts, nuts and washer of suitable size incuding painting the bracket & clamp with two coats of aluminium paint over a coat of primer complete all as specified and directed.

S&F in repairs IP65/IP66 Thermoplastic Polycarbonate cable Junction box for street lights; size not less than 205mm x 255mm x 112 mm suitable for cable dimensions of size 10 to 25 sq mm, with 25 sqmm terminal of 32 Amps rating for three phase & neutral mounted on din rail with locking arrangement fixed to PSC/Steel Poles by means of suitable size of clamps made of MS flat 20 x 4mm - 2 Nos with nut, bolts & double washers and including provn for fixing 01 No. single pole, MCB, 10 amps,10KA, ‘B’ series with ON/OFF flap complete all as specified and directed. Make :- Hensel Cat part No:- DK2525 G or equivalent as approved.

S&F in repair Integral LED Street light luminaire with minimum system lumen of minimum 4850, minimum system efficacy ( Not chip level) 115 Lm/watt comprising of die cast alluminium housing, voltage range should be 170-240 volts, enclosed with glass cover in frame, IP 66 with IK08 with < 10%THD, PF>0.95 with auto restart driver with EMC/EMI complaince and BIS registered report submitted by contractor and LED chip should be Cree/Nichia/Osram/Lumileads make and with all fixing arrangements, with LM79 and 80 of NABL certified Lab and nut, bolts with proper earthing connected to electric system with 2.5 sq mm PVC alluminium stranded conductor 3 core upto require length, on pole, including street light bracket, testing, complete all as specified and directed. Make: Philips item code : BRP409LED 47CW SLF PSU S1 or equivalant in Bajaj/Havells/Wipro .

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregates as in foundation filling and mass concrete complete all as specified and directed.

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 25 sqmm, 4 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/V-MARC as approved by GE]

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 16 sqmm, 4 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/V-MARC as approved by GE]

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 10 sqmm, 2 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/V-MARC as approved by GE]

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for pole foundation, cable trench, etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid]

Supplying and laying sub class 'B' bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed

S&F 40mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut,bolt and washer including taking down old rusted pipe complete all as specified and directed. [MAKE:-TATA / JINDAL / PRAKASH / SWASTIK as approved by GE]

M&L for Painting of steel pole (swan neck type or straight type) up to 12 mtr height with cross arms, clamp of any length and shape for LT overhead line/ for stree light with two coat of aluminium paint after scraching out old paint, cleaning and exiting surface rust free, preparation of the existing surface, including marking pole numbers in a 20 cm dia yellow circle with number writting with black synthetic enamel paint & painting strips in alternate from bottom to top with three strips of black synthetic enamel paint & two strips of white fluorescent paint (up to 1.5 mtr height) through out the circumference of pole ( width of each strip shall be of 30 cm), including one coat of lime wash on PCC copping of pole complete all as specified and directed.

M&L for Painting of LT PCC poles with strips in alternate from bottom to top (up to 1.5 Mtrs) with three strips of black synthetic paint & two strips of fluorescent white paint through out the circumference of pole ( width of each strip shall be of 30 cm), including one coat of lime wash on PCC copping of pole and two coat of aluminium paint to channels, cross arm, clamps and pipes fixed/ mounted on pole after scraching out old paint, cleaning and making exiting surface rust free, preparation of the existing surface, including marking pole numbers in a 20 cm dia yellow circle with number writting with black synthetic enamel paint complete all as specified and directed.

M&L for Painting of steel pole High mast Pole up to 13 mtr height with luminarie mounting ring with two coat of aluminium paint after scraching out old paint, cleaning and exiting surface rust free, preparation of the existing surface, including marking including one coat of lime wash on PCC copping of pole complete all as specified and directed.

Taking down u/s automatic street light switch and Supply, fixing testing and comissioning, of automatic street light switch of capacity 5 KW in three phase, using Nature switch for automatic switching of street lights based on LUX level of natural light. The sensor (nature switch) along with suitable power contractor, MCB and support terminals enclosed in pole/ wall mounted enclouser made of rust proof, electric shock proof, termite proof and FR grade SMC junction box (Make: Sintex) conforming to IP54, including mounting arrangement with suitable size of FI clamps 02 Nos with complete acessories complete all as specified and directed. Make:- KAKATIYA ENERGY SYSTEM LIMITED Model No. SWADEEP - 02EC5KW3P, The automatic switching unit shall comprising of following: (i) Contractor rating (AC3) 25Amp 4 Pole or 3 Nos 25Amp 1 Pole: Make : BCH/L&T/Schneider (ii) MCB 32Amps (SP),10 KA, 240 volts (SP 3Nos) Make : Schinder/ Legrand/ L&T (iii) NATURESWITCH-01 Make: KAKATIYA ENERGY SYSTEM LIMITED

Taking down u/s automatic street light switch and Supply, fixing testing and comissioning of automatic street light switch of capacity 5KW in single phase, using Nature switch for automatic switching of street lights based on LUX level of natural light. The sensor (nature switch) along with suitable power contractor, MCB and support terminals enclosed in pole/ wall mounted enclouser made of rust proof, electric shock proof, termite proof and FR grade SMC junction box (Make: Sintex) conforming to IP54, including mounting arrangement with suitable size of FI clamps 02 Nos with complete acessories complete all as specified and directed. Make:- KAKATIYA ENERGY SYSTEM LIMITED Model No. SWADEEP - 02EC5KW1P, The automatic switching unit shall comprising of following: (i) Contractor rating (AC3) single phase 50-60 Amp : Make : BCH/L&T/Schneider (ii) MCB 63 Amps(SP),10 KA ,240 volts. Make : Schinder/ Legrand/ L&T (iii) NATURESWITCH-01 Make: KAKATIYA ENERGY SYSTEM LIMITED

Supply of all in one integrated LED solar street light consists of solar photovoltaic module, battery, battery management system, control electronics, LED driver, PIR sensor, inter connecting cables and pole mounting piece integrated into the luminaire as a single unit. The system must comprise of solar solar street light with IP 65 ingress protection having a system wattage of 27-29 Watt with 4500 lumen output, 60Wp, high efficiency monocrystalline solar panel, highly efficient MPPT based charge controller and 12.8V, 30 Ahlithium ferro phosphate battery. LED lumen efficacy shall be atleast 175Lm/ W with suitable LED driver. The luminaire shall be housed in IK 08 impact resistance certified alluminium pressure diecast housing with anticorrosive coating and must have a UV stabalized polycarbonate cover. The luminaire shall have a specially designed pole mounting piece piece tht enabled lateral as well as post top mounting and installation at varying tilts from 0 to 15 degrees for optimal light distribution. The fixture proposed must have passed LM 79 & LM 80 Reports along with sample from a certified NABL laboratory complete all as specified and directed. CAT NO: BRP710 LED45 CW MR HYFDIM50 SOLAR IN Make : Philips or equivalent in Bajaj/ Wipro

S&F in repair MCCB, 200 Amp, 4 Pole, 36 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting, with thermal release range 160-200 Amp including spreader terminals and phase barriers complete all as specified and directed. Make L&T Cat No. CM90642OONO or equivelent in Schinder/ Legrand.

S&F in repair MCCB, 160 Amp, 4 Pole, 36 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 125-160 Amp including spreader terminals and phase barriers complete all as specified and directed. Make L&T Cat No. CM90642OOMO or equivelent in Schinder/ Legrand/Indoasian/ Havells.

S&F in repair MCCB, 250 Amp, 4 Pole, 36 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting, with thermal release range 80-100 Amp including spreader terminals and phase barriers complete all as specified and directed. Make L&T Cat No. CM90642OOLO or equivelent in Schinder/ Legrand/Indoasian/ Havells.

M&L for repair/replacement of sensor of automatic street light control panel, three phase /single phase including testing for automatic functioning of street light timer complete all as specified and directed.

Supply and fix in repairs Coral post top lantern fitting 25 Watt, energy saving, environment friendly, long life aesthetically designed with symmetrical light distribution with complete accessories complete all as specified and directed. Make: Havells , Cat NO: CORALPT25WLED757PSYMTOPC or equivalent in Bajaj/Halonix

Supply and fix in repairs LED aviation light having die cast aluminium housing with red polycarbonate dome for better illumination, integral led driver, IP 65 protection, operating voltage range 100- 270VAC, to be mounted on high mast pole only, with all connected accessories complete all as specified and directed. Make: Bajaj , CAT NO: BGAV302 LED or equivalent in Philips/Wipro/ Surya.

Deduct schedule of credit (calculation will be done off line) Rs. 1,38,020.00

M/S SURINDER KUMAR MAHAJAN

SUNIL ENTERPRISE

Raj Contruction

Vee kay construction