LEFT OVER WORK FOR REPAIR/REPLACEMENT OF GATE, REPAIR TO COMPOUND WALL, PATH, DRAIN, FENCING, CULVERTS, GARBAGE BINS AND SHEDS AND OTHER MISC WORKS IN OTM AND MD ACCN UNDER AGE B/R-IV OF GE(SOUTH) MEERUT CANTT

Amount

Excavation in trenches not exc 1.50m wide and not exc 1.50m in depth for foundation area n.exc 10 Sqm on plan and getting out in soft/loose soil all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick in soft / loose soil complete all as specified and directed.

Removing excavated soil to a distance not exc 50 m and deposited where directed at a level not exc 1.5 m above the starting point all as specified and directed.

Material and Labour for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundation fillings the mass concrete & sub base of floor all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing debris to a distance not exc 100m complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per item No 7.00 above but except bricks ( old bricks retreived from demolition reused) including cleaning of old bricks complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc including removal of debris and rubbish from the site complete all as specified and directed.

Material and labour for rendering, 15 mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for applying three coat of white wash on newly plaster surfaces of wall surfaces including preparation of surfaces all as specified and directed.

Materials and labour for preparation of old painted surfaces of wall and applying one coats of exterior emulsion paint (weather proof) complete all as specified and directed.

Supply and fix RCC jalli type B-0 (using 12.5mm graded crushed stone aggregate) size 600x750 of 25mm thick (measured solid) including all factory made moulding complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc. 0.5cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm, watering and removing surplus soil to a distance n.exc. 50 m and making good surface complete all as specified and directed.

Taking down existing barbed wire of any description complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling chain link fencing wire mess of any type complete all as specifed and directed.

Dismantling posts and struts (wood, steel or RCC) any sectioin, inlcuding taking out embedded portion and making good disturbed ground complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:4:8, type C-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed

Supply & Fixing Mild steel angle iron post as in fencing posts, cut to length, drilling holes, welding and embedded in concrete complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc. incl provision of binding wire complete all as specified and directed.

Supply only chain link MS galvanised fencing of any type & size complete all as specified and directed. (Sample of chain link fencing shall be got approved from GE before bulk supply).

Supply and fix 40x5 mm thick flat iron as in fastening of chain link fencing fixed to nuts and bolts includng making holes complete all as specified and directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10 cm long, dia of neck 5 to 10mm complete all as specified and directed.

Supply only Mild steel in flat, round or square bar Fe-410W (Gde E-250) quality 'A' in available length complete all as specified and directed.

Supply and fix galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia bars at 75 mm spacing and straining and fixing to any type of standard rail, straining bolt including securing and tying at crossing with and including galvanised MS wire staple or steel pin etc ( Each line of wire to be measured ) complete all as specified.

Supply and fix for framed work such as grills, gratings with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts complete all as specified and directed.

Material and labour for applying two coat of synthetic enamel paint over prepared old/new steel surfaces of any description, not otherwise described over 10Cm width or girth and complete all as specified and directed.

Supply & Fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of steel grade Fe-290, E-165 and including taking down old steel gate & removing from site complete all as specified & directed.

Supply and fixing mild steel works (miscellaneous) as in hold fasts etc and similar small articles confirming Fe-290 Gde-E-165 complete all as specified and directed.

Supply & Fixing 1.6 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified & directed.

Material and labour for 10 to 12mm thick granite stone slab of any type as in wall lining, steps, column , pillars and steps like over and including 10mm thick backing cement screed in cement mortar 1:4, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding of edges and demolition of old granite stone clading complete all as specified and directed.

Material and labour for black ceramic tiles in vertical surfaces 350x250mmx7mm / 450x350x7 mm thick, Joint free tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing cement screed CM (1:4) and dismantling of old tiles Complete all as specified and directed.

Supply and fixing factory made precast kerb stones of size 300x300x150 of M-35 concrete, 150mm thick one side round edge as per sample (size and shape as approved by GE), set jointed and pointed in cement mortar in CM 1:3 as in patches , including necessary excavation and taking out existing kerbs stones complete all as specified and directed.

Supply and fixing factory made precast machine pressed rubber moulded interlocking paver block of M-35 concrete, 60mm thick (size and shape as approved by GE), grey cement and pigments laid over and including 25 mm thick sand complete all as specified and directed.

Material and labour for 6mm thick fibre cement corrugated sheets in roofs, walls etc, fixed with L-type or J-type or cranked hook bolts including bituminous washers including dismantling of old sheets any description complete all as specified and directed.

Supply & Fixing factory made PCC chequered tiles 25 mm thick of size 300x300mm, in floors, set and jointed with grey cement slurry & pointed in white cement mixed with pigment to match the shade of tiles over and including 15 mm thick cement screed bedding layer in CM 1:6 complete all as specified and directed .

Material and labour for fibre cement two piece adjustable serrated ridge, 6mm thick fixed with L-type or J-type or cranked hook bolts including bituminous washers including dismantling of old sheets any description complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, cladding/ridges fixed with self tapping screws including dismantling of old sheets any description complete all as specified and directed.

Material and labour for Reinforced concrete drain pipes, 300 mm bore class NP2, laid and jointed in cement mortor (1:1) with collars including dismantling of old drain pipe complete all as specified and directed.

Material & Labour for structural steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade st - 240 complete all as specified and directed.

Material & Labour for mild steel work in roof trusses ( framed ) , purlin, rafter , fastening , distance pieces, cleats etc (incluidng fixing independently vertical post) complete all as specified and directed.

Supply and fix of structural steel works for plates (plain or chequered) channel, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

Material and labour plain cement concrete 1:3:6 type C-1 using (20 mm graded crushed stone aggregate) as in surface channel, drains all as specified and directed.

Material and labour for extra forming fair finished drain or chanel 30 cm inner girth in cement concrete, using extra cement, incl forms, moulds mitred /stopped ends etc complete all as specified and directed.

Providing cement concrete 1:3:6 Type C 1 (using 20 mm graded crushed stone aggregate) as in copings, and the like including weathering, slightly rounded or chamfered angles and throating, as directed

vibha associates

YADAV CONSTRUCTION COMPANY