Special Repairs to road from Golden Palm to 108 Mtn Bde Sig gate at Brichgunj Mil Stn Sri Vijaya Puram

Amount

M & L for repair to Pot Holes not exceeding 30 mm depth, not exceeding 1.00 Sq.m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc., cutting around edges to at least 25mm depth, making good by applying tack coat with bituminous primer at 5 Kg per 10 Sq.m, putting in SDAC of VG-30 Grade as specified for required thickness as per ground condition and again well rammed with power road roller of 8 to 12 ton capacity and consolidated including supply of SDAC, binder and chipping complete all as specified and as directed by Enh-in Charge.

M & L for Preparing Top Surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt etc. and applying evenly a priming / tack coat with bituminous primer at 10 KG per 10 Sq.m of paving bitumen of Grade VG – 10 complete all as specified and as directed.

M & L for Premixed Bituminous Macadam laid / rolled and compacted to required gradient and camber [consolidate thickness 75mm or less] using paving bitumen of Grade VG - 30 as binder with 4% by weight of total mix using Hot Mix Plant and Mechanical Paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required camber and gradient complete all as specified and as directed. Note: Cost of testing charges, materials, and transportation etc. for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible in this regard. Mix shall be obtained from Hot Mix plant and spreading shall be done by using mechanical paver only.

M & L for Bituminous Premixed Semi Dense Asphaltic Concrete, 40 mm consolidated thickness, using paving bitumen of Grade VG – 30, with 5.5% of binder content by weight of total mix using Hot Mix Plant and Mechanical Paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required camber and gradient complete all as specified. Note: Minimum Bitumen content shall be 5.5% as specified here in above. Please note that if the actual quantity of bitumen to be incorporated on approval of Mix–Design is found more than the minimum bitumen content specified above, No price adjustment shall be made for actual bitumen content of Mix–Design. Bitumen shall be Paving Bitumen of Grade VG–30 and shall be procured by the contractor.

M & L for premixed Sand Seal Coat with 0.06 Cu.m of sand mixed with 6.8 kg of bitumen applied and well rammed with power road roller of 8 to 12 ton capacity complete all as specified and as directed.

M & L for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5 mm thick [Reflective Type] of colour White or Golden Yellow on roads, pavements and the like exceeding 10cm wide with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface complete as per MOSRT & H specifications including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and as directed.

M & L for Providing Precast Cement Concrete Solid Block Masonry with Solid Blocks exceeding 100mm width with minimum compressive strength of 50kg/sq.cm using PCC 1:3:6, Type – C1 using 20mm graded stone aggregate set in Cement Mortar 1:6 complete all as specified and as directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed.

M & L for rendering 5mm thick in Cement Mortar 1:4 over a backing coat of 10mm thick in Cement Mortar 1:6 on concrete or brick masonry surfaces and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.

M & L for preparing newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

M & L for Moorum / Red Bajri filling under Floors or in Pavings laid in layers not exceeding 15 cm thick, spread levelled and rammed / rolled with power road roller of 8 to 12 ton capacity including watering to and consolidated to required level, gradient and camber required complete all as specified and as directed.

VASANTHAM TRADERS (BID ID -3329958)

K R PRAVEEN KUMAR (BID ID -3330284)

M/s Gurunath Construction (BID ID -3329462)

Prasur Electricals & Engineering Co. (BID ID -3330659)

OPS Associates (BID ID -3330555)