REPAIR/SERVICING OF DG SETS AND CONNECTED WORKS AT MIL STN TALBEHAT

Amount

Servicing of 200 KVA DG set including replacement of gasket tappet cover, oil and fuel filter elements, adjustment of tappet of 6 cylinders engine, drain out the old engine oil clean the oil sump and refilling with the required quantity of new oil, Checking of fan hub, including externally cleaned complete all as specified and directed by Engineer- in-Charge (Note:- Spares parts/New engine oil shall be measured and paid separately under relevant items) Make of Engine:- Kirloskar/Cummins

Servicing of DG Set (any capacity of 25 KVA to 82.5 KVA) including replacement of gasket tappet cover, oil and fuel filter elements, adjustment of tappet of 6 cylinders engine, drain out the old engine oil clean the oil sump and refilling with the required quantity of new oil, Checking of fan hub, including externally cleaned complete all as specified and directed by Engineer- in-Charge. (Note:- Spares parts/New engine oil shall be measured and paid separately under relevant items) (Make of Engine:- Kirloskar/Cummins)

Overhauling of water pump assembly complete including material and labour for impeller, shaft seal bearing, gaskets washers and rubber hose complete of the 25/40/50/62.5/82.5/200 KVA DG Sets Make : Kirloskar/Cummins/Ashok Leyland

Taking out and refixing of radiators after draining out of coolant from the radiator, cleaning de-scaling, repairing/soldering to leakages including M&L coolant required quantity of make as approved in the following DG sets:-

200 KVA Make : kirloskar/Cummins/Bliss

25/40/50/62.5/82.5 KVA Make: kirloskar/Cummins/Ashok Leyland

Supplying & Fixing Solenoid Control Switch 12 Volt DC suitable for 50/25KVA DG Set.

Taking out FIP assembly complete, refixing, servicing including M&L in replacement for all elements, i.e., delivery valves adjusting fuel injunction as specified by the manufacture, sealing’s refitting in position and satisfactorily testing of the following DG Sets :-

25/40/50/62.5/82.5 KVA Make : kirloskar/Cummins/Ashok Leyland

200 KVA Make –Kirloskar/Cummins

M&L in replacement of the following:-

Charging meter of any type and connecting complete.

RPM meter electronic type 12 Volt DC Supply.

S&F the following items in replacement DG set 25/40/50/62.5/82.5 KVA Make :- Ashok Leyland/Cummins/power system India

Assembly for filter cartridge with gasket bolt washers.

Exhaust manifold gasket

Fuel filter element Make:- MICO

Fuel line assembly (Fuel pump to filter)

-do- ( Filter out let to FIP)

starting push button of exiting type

Water temp gauge 12 V

Oil pressure gauge

Key switch with all accessories

Fuel line flexible type of any length

Rubber hose pipe with jubilee clip

Fly wheel Ring /starting ring

Vibration pad Make:- As per existing

Fan belt of exiting type and size.

Coolant container of 1 litre capacity

Disconnecting/ de-coupling alternator opening rotor, dusting, cleaning all components lubricating with specified grade grease, warnishing, opening, reassembling of coupling, reconnection including material and labour necessary lugs and satisfactory testing of following DG sets.

Taking out exiting defective following components/Parts of DG sets and material and labour new components in position and satisfactory testing complete for 200 KVA

Fuel filter element primary and secondary with ring & washers

Oil filter element Make:- MICO

Air cleaner element complete inner& outer shell

Hose for assy over flow line

Hose plain for cooling system

Hose thermo set to water pump

Valve assembly thermostat

Taking out defective Self-starter of DG set, penning complete and replacement of worn out parts like carbon bush, shaft bush, servicing, dusting, greasing and refitting and testing complete of following DG sets.

Supply and fixing in repair AVR unit /CVR –II for 200 DG Set. Make : Kirloskar/Cummins

Supply and fixing in repair AVR unit /CVR –II for 82.5KVA/62.5KVA DG Set. Make : Kirloskar/Cummins

Supply and fixing in repair AVR unit /CVR –II for 50 KVA DG Set. Make : Kirloskar/Cummins

Supply and filling engine oil (K-Oil) grade 20 W 40.Make :-Kirloskar/Castrol

Supply and fixing following materials for DG set 200KVA :-

Fan belt of size V 44

Fan belt of size HEMM 20 A 1308

Starting key with oil control switch

Alternator terminal plate of existing type complete with lugs

M&L for Repair of 50/62.5 KVA DG set , opening of cylinder head of engine and oil sump replacement of piston rings with piston set and gaskets kit complete , replacement cylinder head valve 06 set , valve guide 12 Nos valve seat 12 Nos big end bearing 01 set , replacement of oil seals including machine work ,re fixing of all accessories , testing and commissioning complete all as specified and directed by Engineer- in-Charge .

Earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate connected to galvanised strip 32 X 6 mm (earthing lead, length upto 7.5 Metre) by means of bolt, check nut and washer of galvanised iron protected by galvanised iron steel pipe 40 mm bore, light grade and connected to equipment / panel board as directed incl. necessary excavation and earth work, concrete pit in PCC (1:3:6) type C-1, cast iron cover and frame, painting, funnel, wire mesh, 20mm bore GI pipe light grade for watering, charcoal or coke and salt in alternate layers in soft/loose soil complete incl. test point all as shown on electrical plate No. 3 of MES schedule part-1.

HARNAM SINGH ANIL SINGH

ROHIT ENTERPRISES