Construction of Administrative Block at Kupwara Campus.

Amount

Earthwork excavation in all types of soil, murrum after clearing the vegetation and debris (to be segregated and kept seprate from the reusable earth) including carting away from the site ,unloading and dozing at disposal yard etc. conmplete as directed by EIC. FOR FGL to 2M depth. Rate shall include for excavation and disposal of earth within the campus as and where required and as directed by EIC either by manual or by mechanical means, invluding loading & unloading necessary equipments , tools & Plants , dressing to proper level and grade as required, dumping the soil within the campus on the ground taking the necessary precautions to prevent any spillages or spoiling of the campus roads during removal and transporting the soil, all consumables including removal of soil excavated extra by the contractor for providing shoring & strutting ,extra working space required for any kind of works etc complete as directed.( Lead upto 1KM ) Rate shall includes to prevent sliding of sides of foundation,dewatering if required, the contractor shall provide effective and sufficient protection such as but not limited to shoring or any other method. The rate shall includes providing Staging , timbering strutting etc.

Backfilling with available Earth Backfilling in plinth, in embankments , around footing, pits, trenches, foundations etc in layers not exceeding 200mm thickness , including watering ,compacting by ramming/rolling /hand ramming , levelling to specified slopes dressing and consolidation etc at optimum moisture content with mechanical rollers /rammers etc.(compacted to 90% modified proctor density )complete as per specification and as directed ( payment shall be based on certified excavation quantity less volume occupied by structures and therotical completed quantity.As measured from drawings,backfilling with available earth in and around excavated area.

Granular Sub Base (GSB) Supplying from approved source and Laying graded Granular Sub base of specified and approved geotechnical parameters in embankment or depression in specified layer thickness of maximum 250mm, watering and compacting each layer with specified and approved machinery , tools and tackles including 10T rollers, to achieve the optimum moisture content so as to give specified compaction density not less than 98% Maximum modified Dry density at optimum moisture content determined in accordance with is 2720 part viii etc complete as per Morth specification and approved design drawings include quality control testing , Maintenance and protection as directed by and to the satisfaction of Engineer-in-charge.

Providing & laying hand packed stone soling compacted consolidated rammed filling voids all complete carriage upto site of work all heads complete job

Providing and laying plain cement concrete M-7.5( 1:4:8) at plinth level & upto 5m below plinth level in foundations,drains , filling , non- suspended floors, pavements ,ramps etc including shuttering , tamping , ramming vibratiing ,curing ,shuttering ,etc etc all as specified in any shape , position ,thickness and finishing the top surface rough or smooth or as specified and directed with 40mm and down size graded crushed stone aggregates with minimum cement content and maximum cement water ratio as per is:456 latest revision,including all carraiges upto the site of work complete as directed by EIC.

Providing and laying in position speicifed cement concrete M-10 (1:3:6) for all types of structures, including proper vibration and curing including broom finish if required but excluding cost of formwork etc as per drawing, specification and for concreting all floor levels (including cost on account of cube tests and quality control), including all carraiges upto the site of work complete as directed by EIC.

Providing and laying in position ready mix concrete M-20( 1:1.5:3) in RCC for all types of structures including proper vibration and curing including broom finish if required but excluding the cost of formwork and reinforcement etc all complete as per drawing ,specification and direction of EIC for concreting for all levels (including cost on account of cube tests and quality control).,including all carraiges upto the site of work complete as directed by EIC.

Up to plinth level

Above Plinth Level

Providing and fixing to correct level, line plum, vertical, plain formwork with contractors own material in all shapes made of plywood/MS sheets for RCC/PCC works including necessary strutting,scafffolding, bracing etc. leaving necessary recesses, opening chamfers etc. keeping the same in position during concreting and removing after the specified period all complete after as per specification and direction of EIC

Up to plinth level

Above Plinth Level

Supplying, cutting, Bending to shape, fabricating, fixing and tying in postion TMT Reinforcement Steel of Fe 500D Grade at all levels and location as shown in the structural drawing. The reinforcement shall be of an approved brand or equivalent and the rate shall include cost of supply & tying reinforcement with 18 guage GI building wire in the reinforcement rate. The unit rate shall also include cost of all related operations VIZ. inputs of labour, materials tools and tackle, equipment, machinery etc complete. for measuremnt purpose actual quantity for reinforcement bars provided and authentic laps or couplers provided shall be considered.

Structural steel Providing ,cutting ,fabricating, drilling, erecting, riveted, bolted, welded connections, hoisting and placing in position MS structural steel composed of channels, beams,Tubular Hollow sections, Hoists, Angles, Braces,Foundation Bolt, Anchor Bolts for supporting system including cost of all materials, consumables, labour, applying one coat of red oxide primer, one coat anti corrosive paint. complete in all lead and lifts as per drawings and specifications and / or as directed by EIC. up to desired height in trusses, purlins, rafters, staircases where ever required. Details as per structural drawing for any span.

Providing & fixing of stainless steel (grade 304) railing made of hollow tubes,channels etc including welding grinding,buffing ,polishing & making curvatures & fitting the same with necessary stainless nuts & bolts complete i.e fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc of required size of the top of the floor or the side of waist slab with suitable arrangements as per approval of engineer in-charge.

Newel Post (Stainless Steel)

Vitrified Tiles (in floors and skirting) Providing & LAYING OF VITRIFIED TILE (600x600) WITH 3mm SPACERS Laying VitrifiedTiles for flooring over 20 mm thk cement mortar in approved pattern as per drawings or as directed by EIC, including cleaning and preparing the surface for bedding, spreading neat cement slurry by using minimum cement of about 2Kg/SQM prior to bedding and 4.5 Kg/SQM over bedding.Providing and Fixing of variable height Vitrified Tile Skirting ( Tiles sameas flooring Tiles ) , projecting not more than 8mm from the wallplaster line fixed in CM 1:3. The tiles shall be fully buttered withcement paste on the back Joints shall be well cleaned and grouted with matching colour approved quality ready made polymer ( Bal Grout ) based grout, including curing, cleaning, etc complete Brand/make as approved by EIC

Ceramic Tile Dado Providing and fixing Tiles in Cladding / Dado of approved shade,size (minimum 300x450mm) and pattern on masonry walls including border fixed in pattern asapproved by EIC and fixed with rich cement slurry over abacking coatplaster of 12mm thk.Cement mortar 1:3 and grouted with app.shade grout (Bal Grout ) Rate to include, Tile cutting , cleaning ofjoints, finishingjunction of plaster ,curing etc. complete and asper drawing. Brand/make as approved by EIC

Ceramic Tile Floor Providing and laying homogenous 300x300 mm ceramic tiles of approved make, colour and size 6mm to 8mm thick, including 20mm thick backing coat plaster in 1:6 cement mortar, fixed with neat cement paste including providing sealing the joints with approved quality white cement mixed with approved colour to match the tiles colour or approved grouting materials including scaffolding, curing, cleaning etc. complete as directed by EIC. Brand/make as approved by EIC .Glazed Ceramic Tiles

Granite Flooring (in floors and skirting/counters) Providing and laying flooring using 18mm thick Granite (N-Green) of approved size, pattern laid over 20mmthick bed CM 1:4 with tile grouting for flooring, using cement slurry below slabs for packing,asper architectural design, drawing and specifications, including joint filling with approved qualityand colour cement to match the shade of Granite.The work shall include cost of materials,wastage, labour, all lead and lift at all levels, loading and unloading, transportation,cutting, curingetc. and all other incidental charges etc.complete and as directed by EIC. Brand/make as approved by EIC

Precast Pre polished Concrete Tile Floor lawn development Providing and laying homogenous pre cast - pre polished cement concrete tiles of approved make, colour and size , including 25mm thick backing coat plaster in 1:6 cement mortar, fixed with neat cement paste including providing sealing the joints with approved quality white cement mixed with approved colour to match the tiles colour or approved grouting materials including scaffolding, curing, cleaning etc. & including filling with gravel upto 200mm & concrete of grade 1:3:6 of 50mm including cost of shuttering thickness complete as directed by EIC. Brand/make as approved by EIC

Providing and applying 100/75mm triangular ornamental POP cornice along ceiling corners at all positions and levels complete job as directed by EIC.

Plinth Protection Providing & Making plinth protection 100 mm thick of gravels, free from all type of dust and small graded stones , well rammed and consolidated including finishing the top smooth as per drawings , specifications and as directed by EIC

Providing & fixing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position including SS expansion fastners for brick/concrete work(including cost of all materials,leads, lifts & carriages etc upto site of work complete) 1st class Kashmiri Deodar wood to be fixed after test report is obtained from competent lab.

Providing and fixing 35 mm thick glazed shutters for windows and clerestory windows using 10 kg/Sqm. (3.5mm thick) glass panes including black enameled ISI marked M.S. butt hinges with necessary screws. First. Class Kashmiri Kail wood.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood.

DOOR/WINDOW WORKS Double/single leaf flush door with vision panel: Providing and fixing of 35mm thick ISI marked phenol bonded double/single leaf flush door as per design of approved make. Job consists of : covering with 1mm thick laminate of approved make and colour on both sidesof shutter as per design.Grooves to be filled with groutmatching with the colour of laminate. The shutter will have a glass vision panel 6mm thick clear glass of approx.450x200mm on both shutters with necessary deep etching/bevelling, T.V beading: the shutter shall be finished with 6mm thick teak wood lippingpatti alround the shutter anf finished with paint matching the lamination on the teak wood lipping patti, including fixing of 4 No. 100mmx75mmx3mm thick SS hinges ,Door hardware like handles,door closer etc complete job (Magnum/Dorma/Doorset Make)

Providing and fixing of Float Glass Panes of 3.5mm thickness

Lockable Sliding Door Bolt Providing and fixing lockable aldrops capable of smooth sliding action. MS powder coated sliding door bolt (aldrop) shall be made from rolled steel . The hasp shall be of MS and screwed to the bolt in a workmen like manner. Alternatively the hasp and bolt should be in one piece. Bolts shall be finished to shape and threaded with worth standardand provided with round brass washers and nuts of sqare or hexagonal shape.All components should be smooth and powder coated.The leading dimensions of aldrop shall be as the length of the bolt and specified diameter. 350mm x 20mm

Tower Bolt Providing and fixing Brushed steel hardwares Providing and fixing tower bolt (barrel type) with necessary screws etc. complete. 100 x 10 mm size.

Tower Bolt Providing and fixing Brushed steel hardwares Providing and fixing tower bolt (barrel type) with necessary screws etc. complete. 150 x 10 mm size

Tower Bolt Providing and fixing Brushed steel hardwares Providing and fixing tower bolt (barrel type) with necessary screws etc. complete.200 x 10 mm size.

Pull Handle Providing and fixing Brushed steel hardwares Providing and fixing Pull Handle (D type) with necessary screws etc. complete.

150 mm size.

100 mm size

ROOFING Providing & Fixing Colored powder (Pre-coated galvanised iron high profile sheets (thickness of sheet in mm: 0.50 + 0.05 % total coated thickness with zinc coating 120 grams per sqm ) curved as per sections /architectural drawings including Eave gutters, downspouts, Gable trims, corner flashing, drip trims, foam closures (inside and outside) and all necessary flashings 0.5mm prepainted (Color to be established during detail engineering stage).and fixing with polymer coated bolts, and nuts, GI plain and bitumen washers or with self drilling fastener and EPDM washers and necessary waterproofing sealants etc. complete as directed by Engineer in Charge.

Ridges / Hips / Valleys Providing and fixing ridges or hips / valleys of width 60cm over all width plain G.I sheet fixed with nails G.I limpet washers complete 0.50 mm thick powder coated.

Eaves Boarding Providing and fixing plained eaves boarding 250x32mm size of first class budloo Including all nails,screws etc.providing and applying priming coat of as per specifications with two coats synthetic enamel paint of approved shade as per instructions of EIC

Soffits Providing and fixing 12mm thick wooden panelling in soffits of first class budloo wood,including cost of necessary budloo joist frame 50x50mm, including applying priming coat of approved malamine/touchwood polish in two or more coats shade as per instructions of EIC.

Providing and fixing of 16 mm dia holding down anchor bolts 500 mm long along with nuts for holding of steel trusses.

15 MM THICK PLASTER IN 1:4 CM Providing and applying average 15 mm thk cement plaster in single coat incement sand mortar 1:4 to all outer surfaces at all levels including surfacepreparation, staging, scaffolding and roughening the surfaceas directed.

12 MM THICK PLASTER IN 1:4 CM Providing and applying average 12 mm thk cement plaster in single coat incement sand mortar 1:4 to all internal surfaces at all levels including surfacepreparation, staging, scaffolding and roughening the surfaceas directed.

APEX PAINT Providing and applying Acrylic based (Apex) paint of approved make and colour over the external surfaces at all levels inclusive ofsurfacepreparation by scrapping the surface and applying withacralycreadymade putty of approved brand as per manufacturer'srecommendations,filling cracks with approved crack fill material suchas Sunfilla orequivalent, applying sealer or primer coat as recommendedby manufacturerand applying two finishing coats, cleaning the floorsurface aftercompletion of work, etc. complete as directed.

ACRYLC EMULSION PAINT Painting, two or more coats with Dulux paintand approved shade on internal walls and ceilingsasrequired to give an even shade including preparing the surface,applying primer coats, etc. complete all to the satisfaction of EIC. Brand/make as approved by EIC

SYNTHETIC ENAMEL PAINT Providing and applying three coats of Synthetic Enamel paint to all surfaces, in approved colourover a coat of primer including preparation of surface by thoroughcleaning, sand papering and as per manufacturer specification to give a smooth and even surface, necessary scaffolding etc., complete and asdirected by Engineer-in-charge. Brand/make as approved by EIC

Providing and applying POP punning to walls of avg. 2mm thickness to line level and plumb including surface preparation; required punning to be undertaken and completed in workman-like manner, to ensure desired finishing standards, as directed by EIC.

Supplying, installing, testing & commissioning to the entire satisfaction of the owner , water closet squatting pan (Indian type W.C. pan ) with 100mm UPVC P or S trap , 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device(handle lever) conforming to IS : 7231, 40 mm pipe, flush bend, with all fittings and fixtures complete including cutting and refurbishing the walls and floors wherever required as per the directions of Engineer-in-charge. All should as per tender specifications . * White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Brand/make as approved by EIC

Supplying, installing, testing & commissioning to the entire satisfaction of the owner, white vitreous china floor mounted water closet (European type W.C. pan) with seat and lid, 10 litre low level vitreous china flushing cistern with dual flush , conforming to IS:7213 with pvc flush bend with all fittings and fixtures such as brackets etc. complete including cutting and refurbishing the walls and floors wherever required as per the directions of Engineer-in-charge. All should as per tender specifications . * W.C. pan with ISI marked white solid plastic seat and lid . Brand/make as approved by EIC

Wash Basin Supplying, installing, testing & commissioning of under counter White Vitreous China Wash basin size 560x450 mm with a 15 mm C.P. brass basin tap/mixer , including painting of fittings and brackets, cutting and refurbishing the walls wherever required . Brand/make as approved by EIC

32 mm CP brass waste coupling with 32 mm PVC bottle trap (detachable type) with. CP brass extension piece & wall flange. CP brass with rubber ring.

Supplying, installing, testing & commissioning to the entire satisfaction of the EIC, white vitreous china flat back urinal of size 580x380x350mm, with fittings,suitable urinal patition,standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, upvc trap with grating and other couplings in C.P. brass including painting of fittings and cutting and refurbishing the walls and floors wherever required as per direction of EIC. Brand/make as approved by EIC

Angle Valve Supplying, installing, testing & commissioning of C.P. brass angle valve with C.P. wall flange, Nut and Washer etc. complete as required.(Wash basin,urinal,drinking water,sink,WC cistern). Brand/make as approved by EIC

Toilet Paper Holder Supply and fixing of recessed type (S.S) TOILET PAPER HOLDER of approved make including cost of materials and labour, with all lead & lift, loading & unloading & all other incidental charges etc., complete as per specifications as per the directions of Engineer-in-charge. Brand/make as approved by EIC

Supply & fixing in position 20mm dia 600mm long CP Towel Rod as per the directions of Engineer-in-charge.

Coat Hook Supply & fixing in position of C P Twin Coat Hook with necessary fixing material etc , all of approved make ,complete in all respect Brand/make as approved by EIC

Mirror Supply & fixing in position of 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Brand/make as approved by EIC

Geyser Supplying, fixing, testing and commissioning of storage type water heater (Geyser) with automatic thermostatic control electric element, pressure release valve, M.S. nuts and bolts etc.complete, conforming to IS: 2082. 50liters capacity (with minimum 4 star rating) Brand/make as approved by EIC

Bib Cock Supply of C.P. brass bib cock which should include necessary accessories , complete in full respect. Brand/make as approved by EIC 15mm nominal bore

Supplying, installing, testing & commissioning of CP Brass two way bib cock with wall flange & Health Faucet / jet spray with plastic flexible pipe 8 mm dia, 1 m long, wall hooked complete as required, including necessary Accessories , installation charges and complete in full respect as per the directions of Engineer-in-charge. 2 way Bib Cock Hand Shower (Health Faucet) Brand/make as approved by EIC

uPVC Pipes (inside the Toilet in filling or chased in wall or shaft or vent or outside toilet or underground with proper cushion ) Supply, installation,testing & commissioning of uPVC SWR PIPE of approved make confirming to IS:13592 - 1992, Class-B (for 75 mm to 110mm ND) , and IS 4985 - 2000, class-10 kg/sqcm (for 32 mm to 63mm) including fittingsall necessary fittings and specials such as bends , door bends , door tees , cowl piece, junctions offsets, access pieces, jointing with Tee shaped rubber seal ring confirming to IS : 5382-1985 and with PVC Adhesive Solvent, including Cutting, chases/holes in floors / walls / slab.The pipes shall be running over slab (in-filling) in areas such as toilets, Pantry etc. Cost shall be including jamming by pillers, supports of 1:2:4 concrete, as per required slope/Line & level complete as approved by Engineer-in-Charge. All should as per tender specifications . Brand/make as approved by EIC

Floor Trap Supply, installation,testing & commissioning of PVC Floor Trap of size 110x75x50/40 inside the toilet/Pantry filling area of minimum 50 mm water seal , making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge as follows: All should as per tender specifications.

CP Jali Supply, installing of approved make CP Jali with all fittings complete. 100mm dia. All should as per tender specifications.

Providing, laying, jointing, fixing & pressure testing of 3 layer PP-R (Poly propylene Random copolymer) pipes of Pilsa/Prince thermax Make conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings like tees, bends, elbows, reducers, enlargers, unions, nipples, etc. for inlet,delivery,overflow,underground including excavation and backfilling etc. all places.

PN-20 , 25mm OD(SDR-7.4)

PN-20 , 32mm OD(SDR-7.4)

PN-20 , 40mm OD(SDR-7.4)

Ball Valve PPR Supply, installation,testing & commissioning of Forged brass ball Valves with union of approved make and specifications (suitable for test pressure of not less than 10 kg / sq.cm of the following size) . Thermal insulation with closed cell Elastomeric Nitrile Rubber insulation including all accessories. All should as per tender specifications . Brand/make as approved by EIC

Construction of brick masonry septic tank of size (outer) 12’-0 x 8’-0x 7’-0 of specified design in Excavation,cement mortar 1:4 (1cement:4 coarse sand) with 0-9” thick walls and 4½” thick baffle walls, 150mm thick R.C.C. top slab with reinforced cement concrete 1:1.5:3 mix (1cement:1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) and reinforcement @ 96.11Kg / cum of concrete of required dia. As per design foundation concrete 100mm thick cement concrete 1:4:8 mix (1cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) with 100mm under coat of dry stone soling duly rammed, inside plastering 15mm thick with cement mortar 1:3 (1 cement : 3 fine sand) with a floating coat of neat cement slurry. Including providing and fixing of heavy duty approved make C.I. manhole covers of 18” dia. 2 No. with Providing and laying integral cement based treatment for water proofing on horizontal and vertical surfaces at all depth below ground level for underground structures as directed by Engineer-in-Charge and consisting of : i) 1st layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the levelling course (levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with waterproofing compound in recommended proportions.

Construction of soakage pit by excavating 8’ dia. up to 8’ deep and 4’ dia. up to minimum 4’ deep with dry stone masonry periphery of 2’-00 wide and 8’-00 in height in the above portion with top in R.S. masonry cement 1:6 (1cement: 6 fine sand) 2’-0 wide and 2’-0 in height, including providing and laying of R.C.C slab 9” thick in 1:1.5:3 mix of cement concrete with stone aggregate 20mm size and reinforcement @ 96.11Kg / cum of concrete of required dia. As per design including cost of C.I. manhole cover 2’x2’ heavy duty. The design and drawing will be provided by the site engineer

Supplying, installing, testing & commissioning of Polyethylene Water Storage Tank, including making holes for inlet, outlet, overflow, level indicator, drain & vent points and suitable cement concrete base including installation,testing & commissioning of thermal insulation over tank with EPS insulation having thermal resistance not less than 0.89 oK.m2/W at 25 deg F, density 40 kg/ cum as per ASTM C 578, covered with wire mesh and finally covered with 12mm thick cement plaster of 1:3 mix (1 cement:3 sand) including all accessories etc .

For underground installation including excavation , PCC 1:4:8 base , circular brick work 230 thick along the perimeter of tank to prevent soil collapse and 150mm thick top cover of M25 grade RCC using 12mm dia. Reinforcement and inspection hatch.

For roof top mounting including CC base over existing slab and necessary tapecrete water proofing works , tank nipples , shutoff valves and float switch.(1 unit=1000 ltrs.)

Rectangular Manhole Construction of intercepting chambers of 230mm thick brick masonry in 1:3 cement mortar, 150mm thick foundation in 1:3:6 cement concrete, 20mm thick waterproof cement plastering in 1:3 to both internal and external surface finished with floating coat of neat cement, SFRC cover and frame (medium duty, MD-10 grade designation) 560 mm internal diameter conforming to IS:12592, total weight of cover and frame to be not less than 118 kg fixed over 100mm thick RCC coping in 1:2:4 cement concrete with 10mm dia. HYSD bars at 100mm center to center both ways, curing, complete including excavation, backfilling centering shuttering and disposal of surplus earth , as per specifications and directions of the Engineer-in-charge. All should as per tender specifications.600 x 600 for depth upto 1.0m .

Providing, laying, fixing of heavy duty PVC conduit of 1”, 2mm thick with assorted fitting of bends, tees, junction boxes, saddles, clamps wooden gut ties screws/Nails etc. complete as directed by EIC. Brand/make as approved by EIC

Providing and fixing of Fan junction Box (heavy duty) of of approved brand and make having ISI mark complete as directed by EIC.

Providing and fixing of Deep Junction Box of required size (heavy duty) complete as directed by EIC.

Providing and fixing of 1 1/4" PVC conduit pipe 2mm thick Type B with bends and other accessories of make Prince, Finolex, Jindal makecomplete as directed by EIC.

Providing and fixing of 6" PVC conduit pipe 2mm thick Type B with bends and other accessories of make Prince, Finolex, Jindal makecomplete as directed by EIC.

Providing and fixing of 3" PVC conduit pipe 2mm thick Type B with bends and other accessories of approved make complete as directed by EIC.

Charges for hiring structural/ architectural consultant for designing of structure, including vetting of all design calculations and all drawings from competent authority. The services of the consultant shall be hired with consent from the department.

M M SHAWL ENGINEER AND CONTRACTORS PVT LTD

M/S MOHAMMAD ASHRAF GILKAR ENGINEERS AND CONTRACTORS

M/S NASEER AHMAD BHAT

M/S SHEIKH SONS