REPAIRS TO LEAKAGE SEEPAGES IN SUNKEN FLOOR IN TOILET BATHROOM AND KITCHEN SANITARY FITTINGS BATH ROOM DOORS IN DOMESTIC AREA AT AFA HYDERABAD

Amount

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as directed.

Demolition of reinforced cement concrete as in chimneys, roofs, floors etc (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as directed.

M&L for PCC 1:2:4 type B-0 mix (using 12.5 mm graded stone aggregate) average 30 mm thick with water proofing compond finished even and smooth with out using extra cement as in sunken floor portions etc complete all as specified and as directed. (NOTE:- WPC will be measured and paid separately under relevant item of BOQ)

M&L for rendering 15 mm thick in CM 1 : 3 on fair faces of brick or concrete surfaces mixed with water proofing compound finished even and smooth in sunken portion without using extra cement etc complete as specified and as directed. (NOTE:- WPC will be measured and paid separately under relevant item of BOQ)

M&L for primming the surfaces and applying normal treatment and laying 3.0 mm thick APP membrane and fixing by torching and applying evenly a tack coat of bitumen 85/25 @ 1.20 kg / sqm for sunken treatment including providing a GI pipe of 40 mm dia light grade spout projecting atleast 200 mm from external wall etc complete all as specified and as directed.

M&L for PCC 1:5:10 type E-2 mix using 40mm graded stone aggregate as in filling and mass concrete complete all as specified and as directed.

M&Lfor laying 75 mm thick PCC (1:2:4) type B-2 mix using 40 mm graded stone aggregate as in floors or for pavings, hard staning etc finished fair and even complete all as specified and as directed.

M&L for cement concrete PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in bands, plinth courses, parapets copings, kneelers, apex stones, like including weathering, slightly rounded for chamfered angles and throating complete all as specified and as directed.

M&L for cement concrete, PCC 1:2:4 type B-0 mix (using 12.5 mm graded stone aggregate) as in bands, plinth courses, parapets copings, kneelers, apex stones, like including weathering, slightly rounded for chamfered angles and throating etc complete all as specified and as directed.

Demolition of brickwork or stone / boulder / PCC block masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) exc 10 cm in width set in cement cement mortar 1:6 with solid blocks complete all as specified and as directed.

M&L for Brickwork with subclass 'B' bricks, straight or curved on plan exc 6.0 mtr mean radius, built in CM (1:6), in damaged parapet, chamber and similar work of any description, etc complete all as specified and as directed.

M&L for Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4), in damaged parapet, chamber and similar work of any description, etc complete all as specified and as directed.

Taking up or down 15 mm bore of pipe PVC / steel tubing and connections, complete all as specified and as directed.

Taking up or down 20 mm bore of pipe PVC / steel tubing and connections, complete all as specified and as directed.

Taking up or down 25 mm bore of pipe PVC / steel tubing and connections, complete all as specified and as directed.

S&F 15 mm bore steel tubing medium grade galvanised with all fittings ISI marked and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F 20 mm bore steel tubing medium grade galvanised with all fittings ISI marked and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F 25 mm bore steel tubing medium grade galvanised with all fittings ISI marked and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Demolition of stone slabs and tiles of any description / any position or thickness as in floors, aprons etc complete all as secified and as directed.

M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes etc complete all as specified and as directed.

S&F Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.

S&F Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.

S&F Vitrified Ceramic tiles light shade 10 mm thick (square / rectangular) polished area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed..

S&F Chequered cement concrete tiles of size 30 cm x 30 cm x 20 - 25 mm thick, set, jointed in grey cement and pigments and pointed in neat cement slurry as in floors complete all as specified and as directed.

M&L for Sand cushion spread, rolled and consolidated to required gradient and camber and thickness as per site requirement at site complete all as specified and as directed.

S&F 60 mm thick Machine pressed precast conctete interlocking paver blocks any shape and size with grey cement and pigment confirming to IS 15658-2006 of M-35 Grade complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1 : 4 on fair faces of brick work or concrete surfaces rough finished to receive as backing of wall tiling etc complete all as specified and as directed.

S&F Glazed ceramic coloured tiles of size, 350 x 250 x 7 mm or 450 x 350 x 7 mm thick, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.

M&L for 20 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes etc complete all as specified and as directed.

M&L for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including rubbing and polishing and provind hole to Granite for gas pipe complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab stone including rubbing and polishing and providing hole to stone for gas pipe complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

S&F in repairs High density polyethylene pipes (HDPE) 40 mm dia of pressure rating 6.0 kg / cm2 and fixed to walls , ceilings or laid in floors complete all as specified and as directed.

Supply only integral water proofing compound (WPC) complete all as specified and as directed.

S&F in repairs of Vitreous china squattig pan, Orissa pattern of size 580 x 440 mm,white with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe, and with 'P' or 'S' trap, including making good to floor complete all as specified and as directed.

S&F in repairs PVC flush pipe (Long bend length approx 1 mtr) 32 mm dia for low level flush tank (High density) of standard make suitable for IWC complete all as specified and as directed.

S&F in repairs of Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.

S&F in repairs of Vitreous china wash hand basin, white flat back, size 550 mm x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets etc complete all as specified and as directed.

S&F in repairs Waste coupling of 32 mm dia chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and as directed.

S&F in repairs brass Chromium Plated Bib taps 15 mm bore cast copper alloy screwed down high pressure screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F in repairs Angle Valves 15 mm dia cast copper alloy fancy type Chromium Plated longshank screwed down high pressure with handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs Gun metal globe or Gate Valves of 20 mm dia with iron wheel head screwed both ends for iron pipe etc complete all as specified and as directed.

S&F in repairs Gun metal globe or gate valves of 25mm dia with iron wheel head screwed both ends for iron pipe etc complete all as specified and as directed.

S&F in repairs Ball valve 20mm dia high pressure PTMT with epoxy coated aluminium rod and highdensity plastic ball screwed for iron pipe and fixed (Minimum weight. 210 gms) complete all as specified and as directed.

S&F in repairs Ball valve 25mm dia high pressure PTMT with epoxy coated aluminium rod and highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 455 gms) complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose LONG ARM with or without swivel joint any size including fixing to steel pipe or union, of size 125 mm complete all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F in repairs of PVC connection 15mm size with brass CP nuts of length 450 mm complete all as specified and as directed.

S & F Rotational moulded PVC water storage tanks of 250 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 250 ltrs complete all as specified and as directed.

S & F Rotational moulded PVC water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 250 ltrs complete all as specified and as directed.

S & F Rotational moulded PVC water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 250 ltrs complete all as specified and as directed.

S&F in repairs Lids for Rotational moulded PVC water storage tank of 250 to 2000 ltrs capacity fixed in position all as specified in SSR part – I complete all as specified and as directed.

S&F in repairs Nipple / flange 20 mm suitable for HDPE water tank (Minimum weight 45 gms) complete all as specified and as directed.

S&F in repairs Nipple / flange 25 mm suitable for HDPE water tank (Minimum weight 65 gms) complete all as specified and as directed.

S&F in repairs Brass CP wall mixer 'hot' and 'cold' water scerwed down for iron pipe etc complete all as specified and as directed.

S&F in repairs Pillar taps 15 mm dia, cast copper alloy, Long nose , chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capston head, screwed for iron pipe complete all as specified and as directed.

S&F in repair centre hole basin mixture 15 mm dia with fancy type heads chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capston head, screwed for iron pipe and fixed complete all as specified and as directed. (Make : - Jaguar cat part No - CQT-23169B) or equivalent approved make.)

S&F in repairs PVC waste pipe 32 mm bore, 900 mm long etc complete all as specified and as directed.

S&F in repairs brass chromium plated towel rail 600 mm long "D" type fixed with suitable steel screw etc complete all as specified and as directed.

S&F in repairs towel ring 150 mm dia type ABS body chromium plated fixed with and including Chromium plated brass screws complete all as specified and as directed.

S&F in repairs Soap dish, stainless steel and fixed to walls with screws etc complete all as specified and as directed.

S&F in repairs toilet paper holder ABS body chromium plated box type complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S& F in repairs Vitreous China urinals, half stall type complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:3 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and as directed.

S&F in repairs stainless steel grating hinge type 100 mm dia complete all as specified and as directed. Make : - Pearl , Cat Part No FG92/93 Precision or equivalent approved make

S&F in repairs Plastic water closet seat cover, black, closed pattern with flat bottom. and cover and mild steel chromium plated or aluminium hinged device etc complete all as specified and as directed.

S&F in repairs sinks made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size of 495 mm x 420 mm and bowl size of 410 mm x 330 mm x 160 mm etc complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size of 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm etc complete all as specified and as directed.

Fixing only existing sinks with drainage board , kitchen or laboratory sinks of any description with plugs, washers and wastes , including bedding in cement mortar in CM 1:4 to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and as directed.

M&L for glass dividing strip 3 mm thick of 38 mm wide inserted in position, conform to design etc complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and as directed.

S&F in repairs cast iron floor trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) etc complete all as specified and as directed.

S&F in repairs cast iron Nahani trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) etc complete all as specified and as directed.

S&F UPVC (SWR) pipes 110 mm bore single socketted in any length with rubber ring joints fixed on walls complete all as specified and as directed.

S&F UPVC (SWR) bends any radius suitable for 110 mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) branch piece single (Single Y) equal or unequal 110 mm dia complete all as specified and as directed.

S&F UPVC (SWR) pipes 75 mm bore single socketted in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F UPVC (SWR) bends any radius suitable for 75 mm bore pipe complete all as specified and as directed.

S&F UPVC (SWR) bends any radius with oval access door suitable for 75 mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) branch piece single (Single Y) equal or unequal 75 mm dia complete all as specified and as directed.

S&F PVC (SWR) reducer 100 mm to 75 mm dia complete all as specified and as directed.

Taking down cement plaster in walls / ceilling surfaces on brick work or stone masonry walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L forrendering 15 mm thick in CM 1:4 on external wall surfaces (5mm thick with WPC over 10 mm thick cement plaster in two layers) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces as is ceillings finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces walls and applying three coats of white wash etc complete all as specified and as directed.

M&L for preparation of newly plastered ceilling surfaces and applying three coats of white wash etc complete all as specified and as directed.

S&F in repairs CP Bib taps two way in one 15 mm dia cast copper alloy fancy type with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F in repairs ABS body CP health faucet complete set including holder stand and one metre PVC pipe, 15 mm cast copper alloy screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and as directed. (Make :- CERA Cat Part No 8030101 or equivalent approved make)

S&F in repairs Gun of health faucet ABS body, CP to be fixied to exixting health faucet pipe etc complete all as specified and as directed.

S&F in repairs holder stand for health faucet ABS body to be replaced to exixting holder stand of health faucet etc complete all as specified and as directed.

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc not exc 250 ltrs capacity and write date of cleaning and due date of cleaning on OHT complete all as specified and as directed.

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 and not exc 500 ltrs capacity and write date of cleaning and due date of cleaning on OHT complete all as specified and as directed.

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 500 and not exc 1000 ltrs capacity and write date of cleaning and due date of cleaning on OHT complete all as specified and as directed.

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 1000 and not exc 2000 ltrs capacity and write date of cleaning and due date of cleaning on OHT complete all as specified and as directed.

S&F in repairs glass corner / mirror shelves of size 300 mm / 450 mm of each fixed with necessary screws, bolts , and supporting 'L' type angles with drilling in walls complete all as specified and as directed.

S&F in repairs PVC Cabinet of size 600 mm x 450 mm with necessary fittings and hinges complete all as specified and as directed .

S&F in repairs fancy type Bib tap standard of PTMT 15 mm high pressure screwed for iron pipe and fixed. (Minimum weight 15 mm- 105 gms). complete all as specified and as directed .

M&L for precast reinforced cement concrete 1:2:4, type B-1 (using using 20 mm graded stone aggregate), as in kitchen platform and selfs in kitchen slabs, etc including necessary form work , complete all as specified and as directed.

M&L for MS TMT bars 8 to 10 mm dia cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

M.chandraiahsons

M/S NAVEEN BUILDERS

VARALAXMI CONSTRUCTIONS