SPECIAL REPAIRS TO CERTAIN BILLETS AT AF STN SURATGARH (PHASE-I)

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

Material and labour for 10mm thick rendering in cement mortor(1:4) on brick or concrete wall surfaces as backing coat for ceramic tiles complete all as specified and as directed.

Glazed ceramic tilles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloure cement to match complete all as specified and as directed.

Material and labour for 15mm thick screed bed in cement mortar (1:6) for laying floor finish complete all as specified and as directed.

Material and labour for 7 to 8mm thick( area of each tile exc. 0.06 sqm but not exc. 0.11 sqm) non skid White ceramic tiles in floor etc. set and jointed in neat cement slurry and pointed in white cement to match the shade complete all as specified and as directed.

Supply and fix repairs Vitreous China Squatting pan of pattern long pan, size 580 mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, etc complete all as specified and as directed.

Supply and fix in repairs 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets complete all as specified and as directed.

Supply and fix in repair vitreous china wash down water closet pan (pedestal pattern), white with seat cover complete all as specified and as directed.

Supply and fix in repair vitreous china wash hand basin white flat back of size 550mmx400 mm including pipe chain and plug, CI brackets complete all as specified and directed(Make: Hindware/Parryware/cera)

Supply and fix in repair Viterous China Urinal, Half stall type, white including connection to inlet and outgoing pipe (waste coupling)complete fixed to walls with steel screws,spreaders and PVC rawel plug,waste coupling and making good the surface by white cement to match the wall shade complete all as specified and as directed. Make:-Hindware/Parryware/Cera

Supply and fix 15mm bore CP pillar cock,fancy type screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed.

Material and labour for 75 mm thick cement concrete type C2 1:3:6 (using 20 mm graded stone aggregate) in sub base of flooring/ hardstanding/ pavings/ plitn protections complete all as specified and as directed by Engineer-in-Charge..

Supply and fix waste coupling PTMT 40mm (half or full threaded) min weight 60gms complete all as specified and as directed.

Supply and fix PVC connecting pipe 450 mm long complete all as specified and as directed.

Dismantling of 100mm dia cast iron or reinforced concrtee drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

Dismantling of 75mm dia cast iron or reinforced concrtee drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

Supply and fix 100mm sand Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fix 100mm sand Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and as directed.

Supply and fix 75mm sand Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fix 75mm sand Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and as directed.

Supply and fix CI Bends (any radius), diminishing piecs or tapers (larger bore measured) for 100mm bore pipe fitted with oval access doors complete all as specified and as directed.

Supply and fix CI Bends (any radius) with duck's foot or heet rest for 100mm bore pipe fitted with oval access doors complete all as specified and as directed.

Supply and fix CI Bends (any radius) with duck's foot or heet rest for 75mm bore pipe fitted with oval access doors complete all as specified and as directed.

Supply and fix Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete typee B1 (1:2:4) complete all as specified and as directed.

Supply and fix Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete typee B1 (1:2:4) complete all as specified and as directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

Supply and fix 30mm thick solid panel PVC door shutter consisting of frames made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour C channel having a PVC strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as the gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supply and fixing in the frame in the site as per specification and drawing complete all as specified and as directed.

Supply and fix 100mm long MS butt hinge medium weight cold rolled complete all as specified and as directed.

Supply and fix aluminium anodized barrel tower bolt 150mm long extruded section complete all as specified and as directed.

Supply and fix 150mm size aluminium anodized handle fabricated type complete all as specified and as directed.

Supply and fix Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintel hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps,plate washers and similar small articles conforming to 290. Gde-E-165 complete all as specified and as directed.

Material and labour for treating small articles such as hold fasts etc with tar or coal tar black paint including preparation new or old complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections complete all as specified and as directed.

Supply and fix 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls or laid in trenches complete all as specified and as directed.

All as per item Sl No 37.00 above but 20mm dia pipe complete all as specified and as directed.

Disconnecting existing tank 500 ltrs capacity, setting aside (or lowering if required ) for repair ,cleaning etc, and hoisting if required recoonecting and refixing in position.(Cleaning, repairing, etc shall be measured seperately) complete all as specified and as directed.

Dismantling of water tanks exc 250 Ltrs & n.exc 500Ltrs capacity and removing to store complete all as specified and as directed.

Supply and fix polythene water storage tank of 500 ltrs capacity rotational moulded (triplelayered,white coloured, cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 1991 complete all as specified and as directed.

Supply and fix ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe of 20mm dia complete all as specified and as directed.

Supply and fix bib cock brass chromium plated fancy type 15mm dia with crutch or butterfly handle, screwed down, screwed for iron pipe fixed in repairs complete all as specified and as directed.

Supply and fix in repair stop cock 20mm bore cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end complete all as specified and as directed.

All as per item Sl No 44.00 above but 15 mm bore complete all as specified and as directed.

Demolition of cement concrete in sunken floor of any description and in any position complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete of any description and in any situation not otherwise specifically provided for complete all as specified and as directed.

Demolition of reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for Cement Concrete 1:5:10 Type E2 using 40 mm graded stone aggregates as in filling of sunken floors complete all as specified and as directed.

Material and labour for Plain Cement Concrete 1:3:6 type -C2 using 40mm graded aggregates as in surface channels and drains complete all as specified and as directed.

Extra for fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds etc complete all as specified and as directed.

Add or deduct for each 25mm inner girth or part there of over or under 30 cm ditto Note:This item taken for rate purpose only.Total amount against this item shall be deducted from total quoted amount of BoQ by bidder to arrive actual quoted BoQ amount.

Material and labour for fair finished flat form work to soffits of slab, n exc 200mm thick and similar items including edges complete all as specified and as directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Material and labour for formwork to edges of concrete flats n exc 10 cm width complete all as specified and as directed.

Material and labour for Reinforced Cement Concrete Type B1, 1:2:4 (using 20 mm graded granite stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the like complete all as specified and as directed.

Supply and fix factory made steel ventilator with top/side hung shutter including hinges, steel peg stay, complete all as specified and as directed.

Supply and fix mild steel framed work such as grills, grating , gauge etc with end of bars shouldered and/or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Material and labour Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

Supply and fix 3mm thick frosted glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of apperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and Supply and fix 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed.

Supply and fix in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of apperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Taking down cement plaster on brick, concrete block wall or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

Material and labour for 10mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even & smooth wothout using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick cement mortar in two layers i.e 10mm in CM 1:6 and 5mm in CM 1:4 mixed with with approved water proofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces, complete all as specified and as directed.

Extra over rendering on plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels,cornices,skirting, dripmoulds and similar work exc 15 cm but not exc 30 cm in width or girth, including cutting to edges,all mitres and stopped ends etc complete all as specified and as directed.

Material and labour for 10mm thick rendering in cement mortor(1:4) on concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Integrated water proofing compound complete all as specified and as directed.

Rough cast plaster over & including base coat of rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

Material and labour for preparing newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed.

Preparation of new plastered wall surfaces and applying two coats of exterior acrylic emulsion paint (Weateher proof) in camouflaging pattern over 1.5 mm thick JK/Birla wall care putty and including one coat primer (antifungal) complete all as specified and as directed by Engineer-in-Charge.

Material and labour peparation of new walls and applying two coats of oil bound distemper over one coat of primer after finishing the wall surfaces complete all as specified and as directed.

Preparation of newly wall plastered surface i.e. using 1.5 mm thick Birla/JK wall care putty to obtained smooth surface using sand paper and applying two coats of oil bound distemper (approved shade) over two coats of oil bound distemper complete all as specified and as directed by Engnieer-in-Charge.

Preparation of old plastered or unplastered surface of walls and applying one coat of white wash on wall complete all as specified and as directed.

All as per item Sl No 75.00 above but applying one coat of white wash on ceiling complete all as specified and as directed.

Complete removing of existing treatment from inernal surface of wall by wire brushes and stopping of surface and levelling/edging the disturbed places/edges i.e using 1.5 mm thick Birla/JK wall care putty to obtained smooth surface using sand paper and applying two coats of oil bound distemper (approved shade) over two coats of oil bound distemper complete all as specified and as directed by Engineer-in-Charge..

Material and labour for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Prepration of old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

All as per item Sl No 79.00 above but on steel surfaces -ditto-

Demolition of brick work built in cement concrete mortar including all quoins, arches, pillars etc complete all as specified and as directed.

Material and labour for brickwork with fly ash bricks using old size bricks built in CM (1:6)straight or curved exceeding 6 m mean radius complete all as specified and as directed.

Material and labour for brickwork built in CM (1:6)straight or curved exceeding 6m mean radius, but except brick complete all as specified and as directed.

M/S Shree Ram Enterprises

RATHORE ENTERPRISES

RAM CHANDER CONTRACTOR

SRI SAI CONSTRUCTION COMPANY