Andaman Nicobar

Active

Works

Civil Works - Others

Repair and Renovation of Type-I Quarter Block No. 05, 06 and 07 Quarter No. 23 to 40 under SD-IV, CD-II, APWD, Prothrapur

Chief Engineer Andaman Public Works Department (APWD)

Prothrapur | South Andamans, Andaman And Nicobar Islands

Amount: ₹22.4 LCloses: 7 Oct 2026

Timeline

Published28 Sept 2026
Closes7 Oct 2026
Bid Opening7 Oct 2026

Tender Value

₹22.4 L

EMD Value

₹44,717

Closing Date

7 Oct 2026, 1:00 pm

Tender Inviting Organisation

Name

EE/CDII/P/Pur

Address

O/O EE/CDII/P/Pur

Work Description

Repair and Renovation of Type-I Quarter Block No. 05, 06 and 07 Quarter No. 23 to 40 under SD-IV, CD-II, APWD, Prothrapur

Tender Information

Tender ID

2026_APWD_24890_1

Reference Number

NIT No. 11/EE/CD-II/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Percentage

Period of Work

90 days

Location

Prothrapur

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender Document

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical

Requiredscan copy of EMD (.pdf)

RequiredCertificates of Work Experience. (.pdf)

RequiredAffidavit at Para No. (i) (as per Para 1.2.2) of CPWD-6) along with Para No. (ii) (undertaking) (.pdf)

RequiredBidding capacity Form C-3 as per page No. 8 of NIT. (.pdf)

Required10 (Ten) Years Financial Audited statement of account from a Chartered Accountant (.pdf)

RequiredCertificate of valid Registration of GST. (.pdf)

RequiredPan Card with address proof (.pdf)

RequiredList of Works in hand (In progress) (.pdf)

Finance

RequiredBOQ (Price bid) (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹44,717

Important Dates

Last Activity

28 Sept 2026

Published

28 Sept 2026

Bid Opening

7 Oct 2026

Download Starts

28 Sept 2026

Download Ends

7 Oct 2026

Submission Starts

28 Sept 2026

Clarification Period

28 Sept 2026 - 29 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (24 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
1.1	35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws	82	sqm	3,375.67	₹2,76,804.94
1.2	25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws	31	sqm	2,953.9	₹91,570.9
2Providing and fixing to existing door frames.
2.1	24 mm thick factory made PVC door shutters made of styles cleats. The shutter frame filled and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer- in-charge. (For W.C. and bathroom door shutter).	15	sqm	4,189.17	₹62,837.55
3	Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge.	30	metre	695.13	₹20,853.9
4Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
4.1	110 mm diameter	61	metre	532.45	₹32,479.45
5Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour
5.1	Old work (one or more coats)	3,089	sqm	88.46	₹2,73,252.94

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.95 MB

Work Item Documents

tenderdoc.pdf

Tender Documents • 1.61 MB

BOQ_26338.xls

BOQ • 0.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
1.1	35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws	82	sqm	3,375.67	₹2,76,804.94
1.2	25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws	31	sqm	2,953.9	₹91,570.9
2Providing and fixing to existing door frames.
2.1	24 mm thick factory made PVC door shutters made of styles cleats. The shutter frame filled and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer- in-charge. (For W.C. and bathroom door shutter).	15	sqm	4,189.17	₹62,837.55
3	Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge.	30	metre	695.13	₹20,853.9
4Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
4.1	110 mm diameter	61	metre	532.45	₹32,479.45
5Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour
5.1	Old work (one or more coats)	3,089	sqm	88.46	₹2,73,252.94

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

1.1

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

sqm

3,375.67

₹2,76,804.94

1.2

25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws

sqm

2,953.9

₹91,570.9

2Providing and fixing to existing door frames.

2.1

24 mm thick factory made PVC door shutters made of styles cleats. The shutter frame filled and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer- in-charge. (For W.C. and bathroom door shutter).

sqm

4,189.17

₹62,837.55

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge.

metre

695.13

₹20,853.9

4Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

4.1

110 mm diameter

metre

532.45

₹32,479.45

5Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour

5.1

Old work (one or more coats)

3,089

sqm

88.46

₹2,73,252.94