REPAIR AND REPLACEMENT OF FLOOR TILES OR WALL TILES AND JOINERY WORK AT AOR OF AGE BR I UNDER GE PARTAPUR

Amount

Dismantling floor hearth or wall tiling including cement mortor bedding but not backing, removing serviceable tiles to stores and rubbish off premises, complete all as specified and as directed.

M&L, Rendering 10 mm thick cement plaster in CM 1:4 as a backing layer for laying wall tiles complete all as specified and directed by Engr-in-charge.

M&L, glazed ceramic coloured tiles in vertical surface 300 X 200 X 7 mm thick set and jointed in neat cement slurry and pointed in white or couloured cement to match, complete all as specified and directed by Engr-in-charge.

Ditto as above Glazed ceramic tiles Coloured and size of tiles450x350x7mm thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match all as specified.

M&L 15 mm thick screed bed or bedding layer of cement mortar for laying floor finish in CM 1:6

M&L non skid coloured ceramic tile 7 to 8 mm thick (square/rectangular) are of each tile exc 0.11 Sqm but not exc 0.18Sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L vetrified ceramic tiles 10mm thick (square/rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement to match incl over 20mm thick CM 1:6 screed bad for laying floor all as specified and directed.

Ditto but on vertical surface as in dados/skirting over 15mm thick backing coat in CM 1:4 all as specified and directed.

Supply and fixing in repair laminated wooden flooring in size 1227mm x 197mm x 8mm thick, including skirting, floor breakers etc complete all as sper manufacturers instruction with a layer of foam backing complete all as specified and directed

Demolition of brick work/ block masonry work built in cement mortar complete all as specified

Material & Labour for precast cement concrete block masonry 1:3:6 type C-I with solid block exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

Material & Labour for precast cement concrete block masonry 1:3:6 type C-I with solid block 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

Taking down cement plaster on brick or concrete stone walls etc incl racking out joints hacking for key scrubbing down with water etc.

M&L for 15mm thick rendering on fair faces block masonry walls in cm (1:6) with finished the surface fair and even.

M&L for 15mm thick cement plastering on fair faces block masonry walls in cm (1:4) with finished the surface fair and even.

M&L preparation of new plastered surfaces of walls. Priming plastered and other surfaces with alkali resistant priming paint and applying two coat of cement base paint complete all as specified.

Two coats of oil bond distemper over a coat of primer on walls, pillasters on newly plastered surface complete all as specified

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal, complete all as specified and directed by Engr-in-charge.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal, complete all as specified and directed by Engr-in-charge.

M&L, for 15mm bore 'Meadium grade' GI tubing with all fitting with fixed complete to walls and ceilings or laid in floors, complete all as specified and directed by Engr-in-charge.

M&L, for 20mm bore 'Meadium grade' GI tubing with all fitting with fixed complete to walls and ceilings or laid in floors, complete all as specified and directed by Engr-in-charge.

3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 15 mm dia.

3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 20 mm dia.

S&F, for 15 mm bore ISI marked fancy bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, chromium plated, fixed in repair, complete all as specified and directed by Engr-in-charge.

S&F for 15 mm bore ISI marked Stop valve of cast copper alloy , screwed down, high pressure with clutch or butterfly handle screwed boath end for iron pipe or for unions, chromium plated, fixed in repair, complete all as specified and directed by Engr-in-charge.

S&F, in repairs for 100 mm bore dia CI floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1, complete all as specified and directed by Engr-in-charge.

S&F, for vitreous china wash basin, white, flat back, size 550 X 400 mm excludng tap, wter chain and blog but includind bracket, fixed in repair , complete all as specified and directed by Engr-in-charge.

S&F, for 15 mm bore ISI marked fancy Piller tap of cast copper alloy with capstan heads, screwed down, high pressure, with or without lettered 'Hot'or 'çold' with lonfg screwed shanks and fly nuts,screwed for iron pipe or for brass ferrule, chromium plated, fixed in repair, complete all as specified and directed by Engr-in-charge.

S&F, in repairs viterous china squtting pan,Orissa Pattern size 580 X 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe) including making good to floor, complete all as specified and directed by Engr-in-charge.

S&F, PVC connection of 15 mm sixe with PTMT nuts of length 450 mm , complete all as specified and directed by Engr-in-charge.

S&F, in repairs viterous china wash down water closet pan ( Pedstal pattern) including saet cover and making good to floor, complete all as specified and directed by Engr-in-charge.

S&F, in repairs,10 ltr capacity PVC valveless, syphonic action type,flushinf cistern,low level,white, with inlet, ball vavle, floate and handle including brackets and flush pipe, complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floor and paving n. exc. 15cm thick (below or above ground level) complete all as specified and as directed.

M & L PCC 1:2:4 type B-2, 100 mm thick using 40 mm graded stone aggregate as in floor and pavings.

M & L PCC 1:2:4 type B-1, 40 mm thick using 20 mm graded stone aggregate as in flooring surface finished even & smooth without using extra cement.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in plinth protection/pavment and the like, finish the surfaces even and fair without using extra cement all as directed and specified

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, 50mm thick as in sub base cemplete all as directed and specified

M&L Chequered cement concrete tiles 200x200mm by 25 mm thick, with grey cement and no pigments incl over 20 mm thick screed bed in CM 1:6, jointed and pointed in neat cement slurry in floors.

M & L machine precast colour concrete decorative interlocking paver block of any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Gde complete all as specified.

M & L 25 mm sand filling under floors including watering and consolidation.

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 Sqm and n.exc 4.00 Sqm each.

Taking down chowkhat or frames of door/ window / ventilators with shutter(Without taking off shutter from the frame) n.exc 1.50 Sqm each.

Taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm.

Re-fixing shutters of any description exc 1.00 m and n.exc 2.00 Sqm.

S&F plain, solid, straight chowkats of second class hard wood and frames, wrough, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints as specified.

S&F, 35 mm thick 2nd class softwood glazed and skeleton shutters, open reabeted and prepare to received glass fitted with cut and mitred beads for secuing glass for ventilators.

S&F, 25 mm thick 2nd class softwood glazed and skeleton shutters, open reabeted and prepare to received glass fitted with cut and mitred beads for secuing glass for ventilators.

S&F 35mm teak face Flush shutter laminated particle board solid core construction with block board core and plywood face panels commercial type on both side complete all as specified.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/galvanized wire staples all as specified.

All as per above item in before but fixed in repair.

Mild steel springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F 100 mm butt hinges, meium weight cold rolled mild steel.

S&F 75 mm butt hinges, meium weight cold rolled mild steel.

S&F Aluminium handles cast type anodised of size 150mm long ISI marked complete.

S&F aluminium anodised barrel tower bolt 200 mm, extruded section.

S& F aluminium anodised sliding door bolts with hasp and stapple extruded section or cast aluminium alloy 250 mm long.

S&F Floor spring double action hydrulically regulated made up of minimum 1.25mm thick aluminium alloy sheet and foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty incl taking down old ones complete all as specified and directed.

S&F aluminium Door closer hydraulically regulated,extruded section body designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed in repairs complete all as specified

S&F 2nd class hard wood as small fittings not exceeding 200 cu.cm. each such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads.

S&F Glazing with sheet, 3mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.

S&F Glazing with figured glass(Frosted), pin head type, 3mm thick, and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing.

S&F curtain rail ,20 mm dia anodised aluminium alloy ,cromium plated fixed with braket, incl taking down of old curtain rods, all as directed.

M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer.

M&L for one coat of synthetic enamel paint to old wooden surface over 10 cm width or girth incl preparartion of surfaces.

HONY CAPT RIGZIN SAMPHEL

THINLES OTZER

M/S SONAM RIGZIN

osho traders

M/S LIBE & CO

H R CONSTRUCTION

M/S BHAT ENGINEERS