Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.6 LAccepted-AOC | L1 | Accepted-AOC Other than Lowest bid | |
| 2 | L2₹27.0 L+₹1.5 L (5.83%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest bid | |
| 3 | L3₹27.4 L+₹1.9 L (7.35%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest bid | |
| 4 | L4₹30.5 L+₹4.9 L (19.4%)Rejected-AOC QURESHI BUILDING BUDSHAH CHOWK SRINAGAR 190001 KASHMIR J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L4 | Rejected-AOC Other than Lowest bid | |
| 5 | L5₹31.8 L+₹6.2 L (24.4%)Rejected-AOC | L5 | Rejected-AOC Other than Lowest bid |
Tender Value
Refer Docs
EMD Value
₹59,000
Closing Date
27 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
SPECIAL REPAIR TO BLDG NO T74 AND PROV OF 12 MEN OR LIVING SHELTER AND 02 X SEPTIC TANK SOAKAGE PIT UNDER AGE BR I
2022_MES_566090_1
GE 874/EWS-59/2022-23
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹59,000
Yes
19 Jan 2023
29 Nov 2022
29 Dec 2022
29 Nov 2022
27 Dec 2022
13 Dec 2022
29 Nov 2022 - 6 Dec 2022
Amount
B/R Portion
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil complete all as specified and as directed by Engr-in-Charge.
Rough excavation not exc. 1.5 m deep and getting out in hard/ dense soil.
Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50mtr in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and getting out as specified & directed by Engr-in-charge.
Removing ecxavated material n.exc 50 m and deposting where directed at all level n.exc 1.50 m above the starting point all as directed.
Removing of excavated material exc. 250m but not exc. 500m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.
Removal of excavated material and depositing where directed at a level n. exc. 1.5 m above the starting point beyond 500 m and upto a total distance of 1.5 Km.
Returning filling in including spreading leveling watering & well ramming in layers n.exc 25cm thick all as specified.
M&L Plain cement concrete 1:2:4 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified.
M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stoen aggregates as in sub base to floor/path / hardstanding etc. complete all as directed.
M&L for 50 mm thick sand filing under floors or pavers, foundation including watering and consolidation, all as specified and directed.
M&L for machine pressed precast concrete, rubberised finished, interlocking paver block any shape and size confirming to IS-15658-2006 of 60 mm thick M-35 grade with grey cement and no pigment, all as specified and directed.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 as in wall/septic tank/soakage well all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified.
M&L Rendering 15mm thick on fair faces of brick work, stone masonry or concrete surface, in cement mortar 1:4 finished the surface even and smooth without using extra cement complete all as specified.
M&L for rendering 15mm thick on stone masonry surfaces or other than fair faces of brick work or on one side of lathing in Cement Mortar 1:4 (using WPC as per manufacturars inatruction ) finished even and smooth without using extra cement.
Supply only integral water proofing compound.
M & L applying two coats of cement base paint including preparation of newly plastered surface of wall complete all as specified.
M & L for rendering 10 mm thick on Brick masonry surfaces or surfaces other than fair face of brick work in cement mortar 1:6, to be finished even and smooth (without using extra cement). complete all as specified.
M&L for two coat of cement base paint over a coat of Alkali resistant primer to newly plastered surfaces of wall including preparation of surface complete.
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
M&L Hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface of broken stone or boulders.
M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection and finished even and fair, complete all as specified and as directed.
M&L 40 mm thick Plain cement concrete 1:2:4 Type B1 (20mm graded aggregate) as in flooring finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L Non skid ceramic coloured tiles 7-8 mm thick,area exc 0.11sqm but nexc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:6 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg).
M&L 50mm thick wall panel made of 0.5mm thick hot dipped galvanised steel sheet on both side with 50mm thick layer of grid cfc free closed cell polyurethane foam with tongue and groove joint including cam lock system for interlocking fixed on base panel 30x65x1.25mm thick density of foam shall be 40 kg/cum (+- 2 kg/cum) the panel shall be precoated coated as approved by AO all as specified and directed by Engr -in charge. Make of PUF Panels and Pre-fab Shelters (PUF Panel, Pre-fabricated Shelters, Various insulation products with PUF/ Puff insulation Panels : M/s UnifixPlast Pvt Ltd, M/s Kingspan Jindal Pvt Ltd Everest industries, M/S Jindal Mectec Pvt Ltd, M/S Prestar Infrastructure Projects Ltd ies Ltd.
S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screw including necessary scaffolding, any type, any location/height complete all as specified and directed by Engr-in-Charge.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including necessary scaffolding, any type, any location/ height complete all as specified and directed by Engr-in-Charge.
M&L 40 mm (for ceiling) puff insulated panel made of 0.50mm thick hot dipped galvanised sheet on both side with 40mm thick ridge polyurethane foam provided with tongue and groove joint for interlocking ,to be fixed with inverted crca tee section 50x50x5mm thick and L section of 50x50x5mm thick fixed to roof trusses all as specified and directed by Engr -in charge. Make of PUF Panels and Pre-fab Shelters (PUF Panel, Pre-fabricated Shelters, Various insulation products with PUF/ Puff insulation Panels : M/s UnifixPlast Pvt Ltd, M/s Kingspan Jindal Pvt Ltd Everest industries, M/S Jindal Mectec Pvt Ltd, M/S Prestar Infrastructure Projects Ltd ies Ltd.
M&L sliding type three track aluminium window or ventilator provided with top and side member 92x31.7x1.5mm thick (1.06 kg/RM minium weight) bottom three track rail shall be 90x31.75x1.5mm (1.248 kg/Rm ) shutter shall of 40x18x1.55 mm section (0.547 kg/Rm weight) shutter shall be provided with handle and self locking arrangement .Interlocking style shall of 40x18x1.45mm (0.607 kg/Rm ) panel shall be of 6mm thick clear grade 6/2 Rs 1.3mm polycaronate sheet . The window shall be fixed to wall panel as standard practice two shutter shall glazed and one shutter shall be ss wire gauged all as specified and directed by Engr -in charge.
M&L Aluminium puff insulated door shall be both solid as well as fly proof main door shall be 50mm thick incl all fittings such as hinges, tower bolt, sliding bolt, handles, door closer etc complete all as specified and directed by Engr -in charge. Make of PUF Panels and Pre-fab Shelters (PUF Panel, Pre-fabricated Shelters, Various insulation products with PUF/ Puff insulation Panels : M/s UnifixPlast Pvt Ltd, M/s Kingspan Jindal Pvt Ltd Everest industries, M/S Jindal Mectec Pvt Ltd, M/S Prestar Infrastructure Projects Ltd ies Ltd.
M&L 25 mm dia curtain rod mild steel powder colour coated fancy type with fixing arrangement for window and door the length shall be 450mm longer than opening size all as specified and directed by Engr -in charge.
M&L Mild Steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of grade Fe -410-W(gde-E-250) Quality A complete all as specified and as directed.
M&L Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and directed by Engr -in charge.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and all as specified and as directed.
M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long, Diameter of neck in 11 to 15mm complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and as directed by Engr-in-Charge.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc complete all as specified and as directed by Engr-in-Charge
M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces on Curved surfaces of concrete complete all as specified and directed.all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and includig mild steel wire (annealed) not less than 0.90mm dia or securing with clips.
M&L for Mild steel TMT bars 5mm dia and over and up to and incl 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips. Gde I IS 432 (part I).
M&L for RCC M-25 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified.
M&L for RCC M-25 as Columns, pillars, piers, posts and struts complete all as specified.
M&L for RCC M-25 design mix using 20mm graded aggregates in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.
S&F GI tube 15 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.
S&F GI tube 20 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.
S&F Stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe.
S&F Bib taps cast copper alloy ,chromium plated, fancy type, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore.
S&F Vitreous China Wash down water closet pan (Pedestal pattern), white incl plastic water closet seat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device & incl P or S trap and connection to trap and to the flushing system anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete all as specified and as directed
S&F PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified.
S&F 1000 Ltr capacity PVC water storage tank (cylinderical vertical with closed top ) and fixed in position all as specified in SSR Part -I.
S&F ball valves, high pressure,with polythene float and flynut, 20mm bore complete all as specified.
S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends complete all as specified.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete.
S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls
S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches
S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door
S & F bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed
S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door
S&F PVC (SWR) reducers any radius 110mm bore
S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access
S&F 110mm bore PVC (SWR) junction, single (single Y) equal or unequal with door access
PVC (SWR) vent cowl 75mm dia.
M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement.
Construction of 10 users septic tank (brick construction) including excavation in soft/ loose soil foundation in PCC 1:2:4, type B-1 ( using 20mm graded crushed stone aggregate) brick masonry in CM 1:4 RCC (M-30 design Mix) slab including cast iron manhole cover having 6mm plate embedded all around with angle iron frame vent shaft etc, complete, all as specified and shown on drawing No CESZ/TD-01/1086/2015.
Construction of soakage well (brick masonry) of 1.2m internal dia and 3.00m deep below inlet level incl necessary earth work, filling with brick bats of gauge 40 to 80mm, SWG inlet pipe junction 150mm bore including all other relevant works, complete, all as specified and shown on drawing No.CESZ/TD-1104/2015.
M&L SGSW line 150mm dia SGSW pipe laid in trenches and jointed all as specified.
M&L for concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded agg) for 150mm bore pipe all as specified.
Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness.
Dismantling of timber scantlings 40 sq cm and over in sec in any position in framed work, carefuly.
Dismantling of boarding, any description, fixed in any position with nails.
Dismantling brick work or stone masonry built in cement mortar.
Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering.
M &L for second class soft wood as in scantling clean sawn fixed in position.
M & L for second class soft wood as in scantling clean sawn fixed in position but except wood. (refixing retrived from item here in before).
Refixing of 2nd class Soft wood weather boarding clean sawn, plain 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps. (retrived from item here in before)
Refixing Second class soft-wood Clean sawn in scantlings ( retrieved from item here in before) in repairs, to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions to store.
M&L RCC nominal mix (1:2:4) using 20mm graded stone aggrigate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.
M&L RCC nominal mix (1:2:4) using 20mm graded stone aggrigate in Beams, cantilevers, bressummers, lintels over 1.5m span etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.
M&L Mild Steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.
Taking down chowkhats or frame exe. 1.5sqm and n.exc. 4 sqm each with shutter (without taking out shutter from the fame).
Taking down chowkhats or frame not exc 1.5 Sqm each ( without taking off shutters from the frame).
M & L for second class soft wood plain, solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue penned and joints. complete all as specified.
S & F Plain, framed, panelled shutters 35mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified.
M&L for second class soft wood 30mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified.
M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths. complete all as specified.
S & F Mild Steel butt hinges 100mm long medium weight.
S & F Mild Steel butt hinges 75mm long medium weight.
S & F 200 Mild steel barrel tower bolts, stove enamelled black, with bright bolt
S & F 150 Mild steel barrel tower bolts, stove enamelled black, with bright bolt
S & F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.
S & F aluminum handles, cast type, anodized 150mm long.
S & F aluminum handles, cast type, anodized 125mm long.
Plain fillet, square, rectangular or triangular in section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails.
M & L sheet glass 3mm thick ordinary quality and glazing with oil putty / wooden beading of appropriate size in square/ rectangular n.exc 0.5 in each pane, 3mm thick. complete all as specified.
M&L for one coat of synthetic enamel paint over a coat of pink primer on old wooden surfaces including preparation of surfaces over 10 Cm width or girth. complete all as specified.
S&F plywood, grade BWR type BB fixed with screw to timber frame of 9 to 12mm thick complete all as specified and directed.
S&F Eaves Boarding of 20mm thick of 2nd class Softwood fixed with nails in any situation (except flooring and skirting), Planed one side with butt joints. complete all as specified.
M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed bed laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in kerb or mud stops rounded or chamfered on edges all as specified for copping, including weathering slightly rounded or chamfered using form work (Straight or curved).
Excavation over area not exceeding 1.50m deep and getting out in soft/loose soil complete all as specified and directed.
Excavation over area excavation 1.50m and not exceeding 3m all as specified and directed.
Taking down copper/aluminium point wiring ( light fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) asd making good distribued surface of wall , floor etc complete all as specified and directed.
Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab Note - Wiring will be as per SSR Part-I and Part II Spoecification and wire will be orignate in DB and end in lt end.
Point wiring for 3 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab Note - Wiring will be as per SSR Part-I and Part II Spoecification and wire will be orignate in DB and end in lt end.
Point wiring for 3 pin 5A socket outlet independent point controlled by one switch with 4.0 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 2.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab Note - Wiring will be as per SSR Part-I and Part II Spoecification and wire will be orignate in DB and end in lt end.
Point wiring for 3 pin 5A socket outlet on the same board controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab Note - Wiring will be as per SSR Part-I and Part II Spoecification and wire will be orignate in DB and end in lt end.
Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor.
Supply & Fixing Switch Socket combination 5 in1, 5 pin 15 Amps flush type complete all as specified and directed.Make : Havells/Anchor.
Supply & Fixing Socket outlet 2 in1, 3 pin 5 Amps flush type complete all as specified and directed. Make : Havells/Anchor.
Supply & Fixing ceiling rose surface backelite 65x50mm two to three terminal (ISI marked). Make : Havells/Anchor.
Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conforming to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.
Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.
Supply & Fixing RCBO, single pole and neutral (SPN) 30mA, 240V , 32 Amp all as specified and directed. Make- Havelles/MDS/Legrand.
Supply and fixing 240V, 'C' series miniature circuit breaker (MCB) of single poles and neutral, current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.
Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3cm thick burried directly in ground ( earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test all as specified or indicated including testing on completion.
S & F LED light fitting 1x18W decorative box type luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.
S & F LED light fitting mirror type luminaires with high out put diffuser 2 feet, 10 watt, 220 Volt AC, decorative type with driver, holder and including LED Lamp including connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.
M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.Make :Havells Batten Cat part No LHFYBYG21N1W020 and LED Tube Rod Cat part No LHLDCLXNUL8X018 or Equivalent.
Supply and fixing of Weather proof PVC flat twin core cable of size 10 sq mm complete all as specified and directed
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.
M/S GAFFARA CONSTRUCTION CO
M/S MOHD YOUSUF CONSTRUCTION CO
m/s mohd saleem and co
M/S MUNEER AHMAD WANI CONSTRUCTIONS
Bidder Name
M/S SAJAA CONSTRUCTION COMAPNY
M/S GAFFARA CONSTRUCTION CO
M/S MUNEER AHMAD WANI CONSTRUCTIONS
m/s mohd saleem and co
M/S MOHD YOUSUF CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .