Construction of Granary at Hokersar.

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

P/L of stone soling incl. ramming, hand packing and all carriages, complete job in room fill, trenches, foundation etc

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

for SLAB

FORM WORK

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.

FORM WORK

Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts.

FOR SLAB AND COLUMN

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

refinforcement @ 60kg/cum

refinforcement @110kg/cum

Brick work with common burnt clay (non-modular first class) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) & Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

d/d for doors and windows

Ruled/ Flush pointing on Red brick masonry surface with lime,

surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellow surkhi):1/2 marble dust . Complete job

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):

Second class deodar wood or equavalent

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.

Second class teak wood 35mm or equavalent First class kail wood or equavalent

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class kail wood or equavalent 35mm

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.

Providing and fixing ISI marked oxidized M.S. door latches conforming to IS : 5930 with screws etc. complete :

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :

Providing and fixing ISI marked oxidized M.S. air hook with necessary screws

Providing and fixing electrical components. All the installation should comprise of fixing the necessary conduits, wiring, switches, MCBs, panell board, lights, fans etc. Make havells / goldmedal or equivalent

Light points(led surface mounted)

exhaust Fan points

Heating point

MCB board with req. MCCB's

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete 50 mm thick with 20mm nominal size stone aggregate.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

ROOF SOFFIT Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws Budloo/fir wood or equavalent

ROOF FASCIA

Providing and fixing plained eaves boarding. 2nd class Deodar wood 250x32 mm (nominal size) or equavalent

P/f of Auminium /glass partition glazing consisting of 10 mm clear toughened glass ( Saint gobain/ Modi make) and fixing with required aluminium framming,rubber sealing, ceiling/bottom to glass connector, glass to glass connector, etc, all the necessary fittings upto all height including scaffolding all complete as per the direction of Engineer-in-charge.

P/F HI ribcolor coated corrugated galvanized PPGI sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalumesteel with silicon modified ployester coating ofapproved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5micron polyester back coat over 5 micron primercoats on both surfaces incld. side and end lap andusing 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area)0.50mm THICK (TATA,JSW OR EQ brand) I/C ALL CARRIAGES/H/LOAD i/c 60cm wide ridges and valleys wherever required incl. all fittings and fixtures in roof sheeting

for truss

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete

First class Budloo/Fir wood or equavalent

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:

Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm for all pop works, windows, doors etc

Providing 10 mm thick plaster of Paris (gypsum anhydrous) to walls, ceiling upto a height of 5m above floor level, Flat surfaces.

Providing and fixing stainless steel silos of Grade 304, including all necessary fabrication, welding, polishing, and surface treatment, paint work complete in all respects as per approved specifications. The work includes the supply of silos with a capacity of mentioned capacity and a thickness of 4-5 mm, fitted with essential accessories like inlet and outlet connections, level indicators, and roof hatches. also sliding or openings, inlcuding the silos are to be anchored on reinforced cement concrete (RCC) foundations as per design. The scope of work also covers framming of base in structural steel, paint work, handling, transportation, unloading, installation, and testing for structural stability and functionality.

Carriage of different materials by Mechanical transport incl. loading, unloading and for stacking at site

Sand 10km

steel 15 km

cement and tiles 10 km

Aggregate 10 km

timber 15 km

bricks 13 km

Carriage of different materials by Manual labour incl. loading, unloading and for a lead of 50 mtr

steel

cement and tiles

Aggregate

timber

bricks

TARIQ AMIN LONE (BID ID -2290544)

SHEIKH CONSTRUCTIONS (BID ID -2291221)