CONSTRUCTION OF AGARBATTI COMMON FACILITY CENTRE AND ALLIED WORKS AT BILLAWAR KATHUA

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil to the site of disposal/dumping as directed by the Engineer in charge. (All kinds of soil)

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth to the site of disposal/dumping including all leads and lifts as directed by Engineer-in-Charge. (All kinds of soil)

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth to the site of disposal/dumping including all leads and lifts as directed by Engineer-in-Charge.(All kinds of soil)

Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked material :(All kinds of soil)

Brick on edge flooring with bricks of class designation 7.5 on a bed of12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks.1:6 (1cement : 6 coarse sand) including curing, carriages all complete job.

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) inludind curing, carriages all complete job.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Mild steel and Medium Tensile TMTsteel bars. (make Sail, Tata, Jindal JSW) including all carriages, complete job.

Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing. All work up to plinth level 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including curing all carriages complete job.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, including cost of centering, shuttering, finishing in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) all complete job.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing, centring, shuttering, finishing with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete job.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in. Cement mortar 1:4 (1 cement : 4 coarse sand) including curing and carriages all complete job.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 coarse sand) including curing and carrigaes all complete job.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Cement mortar 1:6 ( 1 cement : 6 coarse sand) in superstructure above plinth level upto floor five level including curing and all carrigaes complete job.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement :4 coarse sand) including curing and carriages all complete job.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing. complete job.

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) including curing and carriages all complete job.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z section and other sections of approved make confroming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) all complete job.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including carriages , all complete job. (make Tata, Sail, Jindal, JSW)

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including carriages all complete job.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer?in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriages all complete job. (make Tata or equivalent)

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete including carriages all complete job

62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, nosing of steps etc. complete including curing, carriages all complete job

15 mm cement plaster on the rough side of single or half brick wall of mix. 1:6 (1 cement : 6 fine sand) including curing, carriages all complete job

12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand) including curing, carriages all complete job

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface: 13.43.1 water thinable cement primer

Wall painting with arcylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Applying priming coat: with ready mixed red oxide Zinc chromate primer of approved brand and manufacture on steel work (second coat)

Finishing with Epoxy paint (two or more coats) at all locationsprepared and applied as per manufacturer;s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

Providing and fixing at bamboo mat board conforming to IS: 13958 - 1994 for partition to frame by bucking or studding with screws etc. Complete (frames, backing or studding to be paid separately) 3-6 mm thickness

Providing and laying in position cement concrete of specified grade including curing, centring and shuttering. All work upto plinth level with 1:4:8 mix (1 cement : 4 course sand : 8 graded stone aggregate 40 mm nominal size) including all carrigaes complete job.

Providing and laying 50mm (Average)thick cemment concerate Flooring 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate) including curing and carriages complete

Providing and laying 50 mm thick cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, curing, nosing of steps etc. complete with 20mm nominal size stone aggregate including curing and all carriages complete

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand) including curing all carriages complete job.

Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers:

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) including curing all carriages complete job.

Add for plaster drip course/grooves in plastered surface or moulding to R.C.C. Projections all complete job.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In all colours, shades, except White, Ivory, Fume Red Brown including curing carriages all complete job (make Kajaria/Somany/Nitco)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including curring carriages all complete job. (make Kajaria/Somany/Nitco)

Proving and fixing C.I cover with frame for mainhole,medium duty {mainhole cover with with frame(500mm dia)}

Providing and fixing powder coated aluminium work for doors/ windows/ ventilators/ partitions including 5mm thick plain glass/12mm thick pre-laminated particle board or ACP sheet as directed by engineer-in-charge including all necessary fittings complete job.(powder coated aluminium section 100x50mm for frames & 85x45mm for doors and shutters of 16 gauge) etc. complete job at site including all necessary fittings and fixtures.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (2mm thick)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Providing gola 75x75 mm in cement concrete 1:2:4 (1cement:2coarse sand:4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S (non modular) bricks of class designation 7.5

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing, carriages all complete job.

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion carriages all complete job. (make Supreme, Prince, Astral)

110 mm diameter

110 mm bend

Providing and fixing un-plasticised -PVC pipe clips of approved design to un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs,screwed with M.S.screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. (110 mm)

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (make sintex, star, Astral)

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931(Make jaquar,kerovit,cera,hindware.)

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing pillar tap (Make jaquar,kerovit,cera,hindware.)

Providing and fixing wash basin with pedestal (Make cera,hindware.)

Providing and fixing mirror 18"x22"

Providing and fixing S.S towel rod (1'--6")

Providing and fixing white viterous china urinal with partition.(make Jaguar, Parry ware, hindware)

Providing and fixing flexible waste pipe .

Providing and fixing S.S ,C.P grating

Providing and fixing C.P connection pipe 24"

Providing and fixing S.S waste coupling

Providing and fixing 20mm brass ball valve

Providing and fixing W.C complete (Indian type) with pvc cistern 10ltr. Capacity all complete job (Make hindware, cera, Jaguar, kerovit.)

Providing and fixing Eureopon seat with pvc 10ltr. Capacity cistern all complete items including jet and seat lid etc.(make Cera, Jaguar, hindware, Kerovit)

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(make astral, supreme, prince, finolex)

110 mm diametre

75 mm diametre

Providing and fixing PVC fittings all complete job.(make astral, supreme, prince, finolex)

pvc plain bend 75mm dia

Pvc Tee 75mm dia

pvc Tee 100mm dia

flow trap 110mm dia

flow trap 75mm dia

tank nipple

Providing and fixing cpvc pipes:- (make astral, supreme, prince, finolex)

15mm nominal outer dia pipes

20mm nominal outer dia pipes.

25mm nominal outer dia pipes.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, COPING, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing, centring, shuttering and finishing with.1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including, carriages all complete job.

Providing and laying in position specified grade of reinforced cement concrete including curing, centering, shuttering, finishing. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including carriages all complete job.

Providing, fixing and applying Plaster of Paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete.Including providing and fixing expanded metalof size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. Wire Make: Anchor/Havells/Vguard/Polycab Conduit Make: AKG/Anchor/Finolex/Polypack

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. Make: Anchor/Havells/Vguard/Polycab

1 or 2 Module

3 Module

4 Module

6 Module

8 Module

12 Module

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Wire Make: Anchor/Havells/Vguard/Polycab Conduit Make: AKG/Anchor/Finolex/Polypack (Group C)

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.(Make: ISI)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make: Anchor/Havells/Vguard/Polycab

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

TV antenna socket outlet

USB PORT Socket

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Make: Anchor/Havells/Vguard/Polycab

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. Make Havells/Dlink/Hikvision 1 run of cable

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Make:HIGH-POWER/Havells/Anchor/Vguard/Schneider)

4 way (4 + 12), Double door

6 way (4 + 18), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Anchor/Havells/Vguard/Polycab/ L&T/Schneider

Single pole

Single pole and neutral

supplying and drawing of 2 pair, 0.5 mm dia annealed copper conductor, FRLS PVC insulated, unarmoured, telephone cable. Make: Anchor/Havells/Dlink/Hikvision

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. Conduit Make: AKG/Anchor/Finolex/Polypack size: 25 mm

Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Make: Anchor/Havells/Vguard/Polycab/L&T/Schneider

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Anchor/Havells/Vguard/Polycab/L&T/Schneider

Supply of 6w surface/recessed ceiling LED light Complete with all accessories as required. (Make:Panasonic/Philips/Crompton/Havells/wipro)

Supply of 30 w surface/recessed ceiling LED light Complete with all accessories as required. (Make:Panasonic/Philips/Crompton/Havells/wipro)

Supply of 36 wsurface/recessed ceiling LED light Complete with all accessories as required. (Make:Panasonic/Philips/Crompton/Havells/wipro)

Supply of LED 9W surface/recessed ceiling LED light Complete with all accessories and connections as required. (Make:Panasonic/Philips/Crompton/Havells/wipro)

Supply of 4ft led Batten 20watt Complete with all accessories and connections as required. (Make:Panasonic/Philips/Crompton/Havells/wipro)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.(MAKE: ISI)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut,bolt, spring, washer excavation and re-filling etc. as required.(Make: ISI)

suppling and fixing angle holder including connections etc as required.

Supply of 09/10 watt LED Bulb.( Make: Panasonic/ Wipro/philips)

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(Make: Anchor) RJ 45( Computer Socket)

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. ( Make: Bajaj/Orient/Anchor/havells)

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 6 ZONE

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm size

Supplying & Fixing of ISI Mark fire extinguisher ABC powdered type MAP based of capacity 06 KG.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of Four Zone Fire Panel (Conventional Type)

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supply of ISI Marked Portable type Fire Extinguisher of Following type and capacity type COZ type 4.5 kg capacity as per IS 15683

M/s Sourabh Construction Pvt. Ltd.

Suresh Kumar