Construction of Mahurikalua PWD road to Luchapada via Kirtiguda road in the District of Ganjam under MMSY for the year 2026-27

B.T. ROAD Clearing and grubbing road land in area of light jungle including uprooting rank vagetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of tress cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned upto a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness including watering and cost of labour, cess & all materials etc. complete as per direction of Engineer-in-charge.

Cutting in disintegrated rock not requiring blasting to be removed by Pick axes and crow bar with intial lead & lift including dressing the sides and levelling the bed to the required width & depth & stocking the cutting earth at approved side cost of all labour, T&P & Cess etc complete as per direction & specification of Engineer-in-Charge.

Excavation in soil in Hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1 and as per the direction of the Engineer in charge.

Excavation in soil in Hilly area in ordinary rock by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1 and as per the direction of the Engineer in charge.

Excavation for roadway in Hard Rock (Requiring blasting) with disposal up to 1000m excavation for roadway in hard rock(required blasting) by drilling,blasting and breaking,trimming of boottom and side slopes in accordance with requirements of lines,grades and cross section,loading and disposal of cut rock with a lift upto 1.5m and leads upto 1000m as per direction of the Engineer-in-charge.

Excavation for roadway in hard rock (blasting prohibited) by Mechanical Means with rock breakers including breaking rock, loading in tippers and disposal with a lift upto 1.5 m and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections by mechanical means as per Technical Specification Clause 302.3.5 and as per the direction of the Engineer in charge.

Construction of embankment with approved material obtained from borrow pits transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H specifications for Road and Bridge works (4th Revision) with cost of all labour, T&P and with cess, royality and as per direction of Engineer-in-charge. (Payment of earthwork will be made compacted level section) only

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 and as per the direction of the Engineer in charge.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub base and compacting with smooth wheel roller of 80 to 100 KN weight to achieve the desired density including lighting, barricadding and maintenance of diversion etc. as per Tables 400.11 & 400.12 and Technical Specification clause 406 with cost of all labour, T&P and with cess, royality, additional charges, DMF 10% & EMF 5% over royalty and as per direction of Engineer-In-Charge.

Providing compacted granular subbase using gravel or moorum with sand admixture saticifying the P.I. value of good quality including cost, conveyance taxes, royality, additional charges, DMF 10% & EMF 5% over royalty cess of all materials and laying, spreading in uniform layers, watering and compacting to the required density complete for finished item of work as per direction of the Engineer in charge