SPECIAL REPAIRS TO BLDG NO P-08(04 QTRS) MAJOR AND ABOVE QTRS AT MANDALEY LINES UNDER GE (N) BANGALORE

Amount

Demolition of cement concrete and paving not exc 15 cm thick including tiling in ground/first floor complete all as directed .

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, Brushing neat cement slurry with 3.0kg of cement per sq. metre etc.complete all as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbishh off the the premises complete all as directed

75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection including forming groove 10 mm wide & 30 mm deep & filled with bituminous filler complete all as directed .

Vitrified ceramic tiles in dark shade 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.complete all as directed ..

Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc. over and including 15mm thick screed bed in CM 1:6.complete all as directed. Make: Blanco Nieve/Crema of Kajaria or eqivalent of Rak/Johnson/Somany

Glazed ceramic tiles in vertical surfaces 300 x 450x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 complete all as directed.

Demolition stone slab and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as directed.

Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 20mm thick screed bed of CM 1:4 including rubbing and polishing complete all as directed.

Machine cut kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including cement 10 mm thick rendering CM 1:4 including rubbing and polishing complete all as directed.

Rounding to edges of stone slabs one edge, such as in steps and other similar situations including making 2 Nos grooves (parallel to tread) rubbing and polishing complete all as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in roofs, floor(other than ground floors) beams, staircases, landing chajjas and similar suspended work complete all as directed.

RCC 1:1:2 using 20 mm graded stone aggregate as in slabs supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as directed.

RCC 1:1:2 using 20 mm graded stone aggregate as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as directed.

RCC 1:1:2 using 20 mm graded stone aggregate as in chajjas complete all as directed.

Form work for chullah hoods, chajjas,troughs and similar items including edges complete all as directed.

Formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thich(horizontal or slopping) complete all as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as directed.

TMT bars 10mm dia and over cut to length bent to shape required, including, cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed.

All as per item No. 19 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as directed.

10 mm thick screed bed in cement mortar 1:4 with using water proofing compound as per manufacture's instructions over the roof slab complete all as directed. Note :- Waterproofing compound shall be measured and paid separately.

400X400 matt finished heavy duty outdoor vitrified tiles fixed in floor etc, set and jointed in neat cement slurry and pointed in premium eroxy grout as per manufacturers instructions complete all as directed. Make of tiles: Duratech of Kajaria or eqivalent of RAK/Johnson/Somany

All as per item no 22 above but in skirting including 10mm thick rendering in CM(1:4) complete all as directed

Supply only integral water proofing compound.complete all as directed

Demolition of brick work /stone masonry built in cement mortar of any description complete all as directed.

Precast cement block masonry with solid blocks grade C-5 ,exc 10cm in width and setting in cement mortar 1:6 complete all as directed.

Walling of squared rubble, regular coursed well bonded bedded and solidly hearted built in CM 1:6 complete all as directed.

Walling of squared rubble, regular coursed well bonded bedded and solidly hearted except stone built in CM 1:6 complete all as directed.

Flush pointing to block in course to random rubble masonry un coursed or brought upto courses in CM1:3 complete all as directed.

Rendering in CM 1:4 15mm thick on stone masonry surfaces finished even & smooth w/o using extra cement complete all as directed.

Rendering 5 mm thick on surface of concrete ceiling in CM 1:3 finished even and smooth with out using extra cement complete all as directed.

Preparation of new plastered surface on ceiling and applying two coats of white wash complete all as directed.

Preparation of old plastered surface on wall and applying two coats of white wash complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Framed work such as grills,gratings, etc with ends of bars shouldered and /or revited or forged into spikes,framed guard bars,barred iron doors,ladders,framed ballusters,walk ways railings,frame work of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as directed.

Mild steel Galvanised pipe 50mm bore medium grade for railing complete all as directed.

vitreous china wash basin white flat back size550x400mm excluding chain and plug and porcelain stopper but including CI bracket. PTMT waste coupling and PVC waste pipe 75 cm long and 15mm dia PVC connection Pillars taps fancy type cast copper alloy fancy type, Stop valve fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia as in repairs complete all as directed. Note:- Pillar tap and stop valve shall be measured and paid seperately

Preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10cm width or girth complete all as directed.

Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe ) and trap , including connection to drain (or out going pipe) and to flushing pipe , anti syphonage pipe ,etc and plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device as in repairs complete all as directed.

Vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest including P or S trap and concrete for necessary fixing as in repairs, complete all as directed.

10 ltr capacity PVC valve less symphonic action type flushing cistern low level white with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, fixed in repairs, complete all as directed. Make: Cat No-502 of Prayag or eqivalent of Hindware/Parryware/Cera

Bib tap cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore (ISI marked) fixed in repairs, complete all as directed. Make: Ruby series od Cera or eqivalent of Kohlar/Jaquar

Bib tap long body cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed in repairs, complete all as directed. Make: Ruby series of Cera or eqivalent of Kohlar/Jaquar

Pillars taps fancy type cast copper alloy chromium plated screwed down high pressure with lettered Hot or Cold with long screwed shanks, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed in repairs, complete all as directed. Make:Ruby series of Cera or eqivalent of Kohlar/Jaquar

Stop valve fancy type cast copper alloy chromium plated screwed down, fancy type chromium plated with long shank and cup concealed type screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed in repairs, complete all as directed. Make: Ruby series od Cera or eqivalent of Kohlar/Jaquar

Angle valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions and fixed in repairs, complete all as directed. Make: Ruby series of Cera or eqivalent of Kohlar/Jaquar

Twin angle cock 15mm cast copper alloy chromium plated screwed down high pressure with capstan head handle screwed both ends or for unions etc fixed in repairs, complete all as directed. Make: Ruby series of Cera or eqivalent of Kohlar/Jaquar

Cast copper alloy chromium plated health faucet for pedestal patern water closet with CP flexible pipe length 900mm fixed in repairs, complete all as directed . Make: Cat No BEA-85 of Prayag or eqivalent of Jaquar/Hindware/Cera

Brass CP wall mixer for mixing hot and cold water screwed down for iron pipe and fixed in repairs, complete all as directed. Make: Ruby series of Cera or eqivalent of Kohlar/Jaquar

Soap dish fancy type of brass CP fixed in repairs, complete all as directed. Make: Cat No BA-25 of Prayag or eqivalent of Jaquar/Hindware/Cera

PVC connection 15mm sixe with PTMT nuts of length 600mm complete all as directed.

Shower rose 15mm brass CP 100 mm dia or round or square with shower arm complete all as directed. Make:- Prayag/Essco/Seiko/Hindware

20mm stop cock cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends or for unions etcfixed in repairs, complete all as directed.

Looking mirror with PVC sheet frame and back supported with 6mm thick AC building board or plywood sheet fixed complete all as directed. Make: Cat No BLM-01 of Prayag or eqivalent of Jaquar/Hindware/Cera

Glass shelf 500mmx125mm with brass bracket fixed with and including chromium plated brass screws and plastic cleats fixed in repairs, complete all as directed. Make :- Cat Part No.BEA-45 of Prayag or equivalent of Jaquar/Hindware/Cera

PVC Mirror cabinet of size 330 x 430 mm fixed in repairs, complete all as directed. Make :- Cat Part No.551 of Prayag or equivalent of Jaquar/Hindware/Commander

Towel rail chromium plated fixed to wall , complete all as directed. Make :- Cat Part No.BA-20 of Prayag or equivalent of Hinware/Jaquar

Taking up or down steel tubing 15mm dia and connections complete all as directed.

Taking up or down steel tubing 20 mm dia and connections including cleaning for refixing or removal to store complete all as directed.

20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as directed.

25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as directed.

Fixing only 20mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc complete all as directed

Taking down PVC (SWR) pipes 110mm dia complete all as directed

Taking down PVC (SWR) pipes 75mm dia complete all as directed

110mm bore PVC SWR pipe single socket in any length with rubber ring joints fixed to wall complete all as directed.

110mm bore PVC SWR pipe single socket in any length with rubber ring joints laid in trenches or in floors complete all as directed.

75mm bore PVC SWR pipe single socket in any length with rubber ring joints fixed to wall complete all as directed.

75mm bore PVC SWR pipe single socket in any length with rubber ring joints laid in trenches or in floors complete all as directed.

75mm bore PVC (SWR) bends with access door complete all as directed.

110mm bore PVC (SWR) bends with access door complete all as directed.

PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as directed.

110 bore PVC (SWR) vent cowl complete all as directed.

110 mm bore PVC (SWR) junction single (single T) equal or unequal with access door complete all as directed.

20mm thick Machine cut Granite (Table rubbed and mirror polished) tiles , with edge rounded one side laid over 15mm thick cement mortar 1:6 screed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as directed.

Kitchen sink made of stainless steel 1mm thick with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets or fixing in granite slab and connecting union to pipe overall size 495mm x 420mm bowl size 410mmx 330mm x 160mm complete all as directed. Make:- Nirali/Anupam/Prayag

Stainless steel plate rack (Minimum 0.6 mm thick) of size 900x900x250mm for utencils, in repair complete all as directed. Make :- Cat Part No.348 of Prayag or equivalent of Shakti/Polytuff

Taking down chowkat (without taking of shutter from the frame) exc 1.5 sqm not exc 4 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 and refixing in same opening complete all as directed.

Taking down and refixing of shutters of any description n exc 1 sqm each in same opening complete all as directed.

Taking down and refixing of shutters of any description exc 1 sqm and n exc 2 sqm each in same opening complete all as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plaint colour PVC sheet reinforced with MS square tube, and fitted in opening complete all as directed.

Factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, fixing in frame at site complete all as directed.

150mm size aluminium anodised handles, cast type, anodised, complete all as directed.

150 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as directed.

Aluminium anodised Butt hinges 100 mm long complete all as directed

Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chambered, put together with glue pinned at joints complete all as directed.

Factory made second class hard wood plain framed panelled shutters 35mm thick with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle tone veneers, fixed to chowkhat complete all as directed.

Second class hard wood 35mm thick glazed and Skelton shutters divided in to squares with plain chamfered or rounded rebated sash bars any numbers fitted with cut and mitred beads for securing glass/ gauge etc in windows/ventilators complete all as directed.

200 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as directed.

Floor door stopper of aluminium alloy body and tongue,anodized with hard drawn steel spring fixed in floor complete all as directed.

150mm size aluminium anodised handles, cast type, anodised, as in repairs complete all as directed.

Butt hinges MS 100 mm cold rolled mild steel powder coated complete all as directed

300mm long alluminium alloy anodised sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as directed

Second class hard wood plain fillets square, rectangular in section wrought securing with screws of area exc 13sqcm but n.exc 25 Sqcm complete all as directed.

Continuous piano hinges with width of flaps 30mm(hen open) mild steel bright finish or electrogalvanized in repairs complete all as directed

Dismantling Boarding,any description, fixed in any position with nails etc complete all as directed

Pre laminated particle board of 12 mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work including all polish work complete all as directed.

Mild steel 300mm ordinary rat taill rod pattern springs including roller and roller plate complete in repairs complete all as directed

40 mm dia cupboard knobs fixed with nut screw and washer of brass polished complete all as directed

100 mm hasp and staple safety type alluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed

MS Wardrobe hooks (single) 50mm to 60mm complete all as directed

Second class hard wood 30mm thick glazed and Skelton shutters divided in to squares with plain chamfered or rounded rebated sash bars any numbers fitted with cut and mitred beads for securing glass/ gauge etc in windows/ventilators complete all as directed.

Butt hinges MS 75 mm cold rolled mild powder coated complete all as directed

Extruded aluminium alloy handles fabricated type anodised 125mm fixed in repair complete all as directed

Aluminium, anodised, barrel tower bolt length of 100 mm, extruded section and fixed complete all as directed

Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete. GDE-E-165 & FE-290 complete all as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame work, stone, concrete or brick surrounds, glazed with putty or fixed with beadings complete all as directed

Aluminium anodised frame for doors, windows, ventilators, structural glazing etc with one or more rebates including joints, cleats for fixing glass etc complete all as directed

6 mm thick sheet glass ordinary quality and fixed with rubber beads/silicon filling in aluminium frame complete all as directed

3 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in wooden frames in squares not exceeding 0.5 Sqm in each pane complete all as directed

Taking down cement plastering including racking out joints, hacking for key scrubing down with water complete all as directed

Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete block walling surfaces finished even and smooth without using extra cement complete all as directed.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete block walling surfaces finished even and smooth without using extra cement complete all as directed.

Rendering 5 mm thick on surface of concrete ceiling in CM 1:3 finished even and smooth with out using extra cement complete all as directed.

Water proofing treatment to sunken portion of WCs, bathroom and kitchen etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating of make Sika/Pedelite/STP/Fosroc . The following procedures to be adopted during the execution of work :- (i) Demolition of existing treatment of any type including cleaning and removal of debris from site. (ii) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (iii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iv) 20mm thick screed in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturers instructions above the treated area. (v) Ponding the treated portion atleast 48 hours. if any leakage/seepage observed the entire procedures will be repeated without any extra cost. (vi) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. (vii) Sunken portion shall be filled with lean concrete 1:5:10 type E-2 (using 40mm graded stone aggregate).

Note :- (i) The sunken slab sloped towards outer face so as the drain the water to GI Spout pipe. (ii) Coving shall be provided at the junction of slab with the wall. (iii) Nahni trap shall be 10mm below finished floor level. Ensure the pipe dia of drain is larger than the nahni trap size. (iv) The outer end of the spout should be chamfered.

Disconnecting existing tanks of capasity exc. 250 Litre n exc 500 Litre , setting aside(or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes complete all as directed.

Rotational moulded polyethylene water storage tanks (three layer) (cylindrical vertical with closed top) hoisted and fixed in positions all as specified in SSR Part-I, capacity of tank 500 liters fixed in repairs, complete all as directed.

Rotational moulded polyethylene water storage tanks (three layer) (cylindrical vertical with closed top) hoisted and fixed in positions all as specified in SSR Part-I, capacity of tank 1000 liters fixed in repairs, complete all as directed.

Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore, fixed in repairs, complete all as directed.

20 mm Gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed.

Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over two coats of wall care putty (minimum 1 mm thick) complete all as directed.

Preparation of old plastered surfaces of walls by complete removal of existing finishes and applying two coats of oil bound distemper over a coat of alkali resistant primer over two coats of wall care putty (minimum 1 mm thick) complete all as directed.

Three coat of white wash on newly plastered of wall including necessary preparation of surface complete at any position all as directed.

Two coat of white wash on old plastered surfaces of ceiling including complete removal of existing treatment and necessary preparation of surface complete all as directed.

Preparation of old plastered surfaces of walls by complete removal of existing finishes and applying two coats of white wash complete all as directed.

Preparation of old plastered surface of wall and applying two coats of cement base paint complete all as directed.

Preparation of new wood surfaces and applying two coats of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete all as directed.

Preparation of old surfaces and applying one coat of synthetic enamel paint on wood based surfaces over 10cm width or girth complete all as directed

Preparation of old painted steel surfaces and applying one coat synthetic enamel paint surface over 10 cm width or girth complete all as directed

Demolition and breaking up drain pipes (salt glazed ware, AC pipe or reinforced concrete set cement mortar complete all as directed

Reinforced concrete pipes class NP3 150mm bore laid and jointed complete all as directed

Plain Cement concrete (1:3:6) Type C2 as in bed to drain pipes including packing under, and haunching against the sides of NP3 pipes 150mm bore after they are laid and tested complete all as directed.

Demolition of existing roof treatment of any type including cement plaster 10 mm thick and PCC 25mm thick, providing screed bed/rendering 10mm thick in CM (1:4) mixed with and including supply of approved water proofing compound as per manufacturers instructions, removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and providing 50mm x 50mm coving at the corners with PMC mortar as above, applying prime coat with anti root primer, Shali prime WP WB @ 400gm/Sqm, first coat of water based Uv resistent elastomeric modified PU liquide membrane, Shaliurethane(R) BTD of STP @ 1 Kg/ Sqm, spreading the fibre glass net of 45 gsm over the entire area, second coat of Shaliurathene(R) BTD of STP @ 1 Kg/ Sqm for elastomeric seamless water proof membrane in two coats to a final DFT of 1.5mm thick having an elogation capacity of over 500% which conforms to ASTM C 836 and ASTM D 6083, complete all as directed. Make Sika/Pedelite/STP/Fosroc

Drapery rod of high strength aluminium rod powder coated (Coating Minimum 40 micron) of outer dia 28mm and inner dia 24.5mm with 2 nos brackets(projected type/wall to wall),finials and rings (8 rings per Meter) complete all as directed. Make: Sleek line type-II of Mac or Soffio-II of Vista Levolor or equivalent

Plain cement concrete (1:2:4) type B-1 using (20mm graded crushed stone aggregate) as in copings, plinth band, bed blocks and like slightly rounded or chamfered angles including necessary form work,complete all as directed..

Precast reinforcement cement concrete B-1, 1:2:4 (using 20 mm graded aggragate ) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc including painting with same colour of the back ground complete all as directed.

Wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conforming to IS 694 drawn through and including non metallic rigid PVC conduit including accessories concealed in walls including MS terminal boxes fabricated with 1.6mm thick MS sheet concealed in walls with plastic laminated sheet top cover 3mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators etc including 1.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as directed for following:-

One Light point controlled by one switch

One fan point controlled by one switch and regulator

One bell point controlled by one bell Push

One 3 pin socket out let 5 Amps on independent board

one 3 pin socket out let 5 A on same board

One Light point controlled by two 2 -way switch

Wiring complete with 2.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conforming to IS 694 drawn through and including non metallic rigid PVC conduit including accessories concealed in walls including MS terminal boxes fabricated with 1.6mm thick MS sheet concealed in walls with plastic laminated sheet top cover 3mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, including 2.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as directed.

Note for Item No 138 &139 :- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box and laminated sheet in the item rate quoted for point wiring.

Wall mounted LED batten 1x20W 4 feet extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver light fitting, complete with all accessories internally pre-wired & including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as directed. Make:-Polycab cat part No L000103076 or equivalent model of Havells/Wipro/Bajaj/Jaquar

LED light fitting1x10 w attractive wall/ceiling mounted type with metallic body and white reflector, suitable for mirror fittings with electronic driver , etc all prewired incl connecting up with flexible copper conductor cable.

Angle holder PVC/polycarbonate with back plate suitable for batten fittings complete all as directed.

Switch piano , flush type single pole, 5 Amps one way complete all as directed.

Switch socket combination 2 in 1, 3 pin 5 Amps flush type universal complete all as directed .

Switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal complete all as directed.

MCB single pole 240 volts 5 to 40 Amps (Curve-C) complete all as directed. Note : Rating of MCB shall be decided by Engr-in-charge.

MCB SPN 6-40 Amp (Curve-C) (ISI marked), complete all as directed. Note : Rating of MCB shall be decided by Engr-in-charge.

MCB TPN 63 amps C curve complete all as directed

Ceiling rose surface type Bakelite of size 65 x 50 mm, 2 to 3 terminals complete all as directed

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including test point complete all as directed.

Stepped type electronic fan regulator flush type, complete all as directed

Removing of existing and provision of new sub main wiring 1100 volts grade multistranded copper conductors, two runs of single core 6 Sqmm along with 6 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run through and including surface type with PVC conduit run on wall/ceiling all as specified and as directed

Bell push , flush type single pole, 5 Amps complete all as directed.

Bell Ding Dong type AC 230 volts single pole complete all as directed.

MCB DB SPN 8 way double door with Acrylic Window 240 volts with 200 Amps rated bus bar for housing MCBs compete all as directed.

MCB DB TPN 4 way double door 415 volts with 200 Amps rated bus bar for housing MCBs compete all as directed.

Switch piano flush type single pole two way 5Amps compete all as directed.

1x 45W LED bldg Security light made up of pressure die cast housing with toughened glass and including high power LED's with secondary optics IP 66 protection and impact resistance complete all as directed. Make:-Polycab cat part No.PUB0506028 or equivalent model of Havells/Wipro/Bajaj/Jaguar

Removing the existing old GI bracket and provision of new GI bracket made out of 25 mm dia GI tubing light grade of approx length 1.5 m size fabricated to a shape including necessary fixing clamps, bolts, nuts & washers complete all as directed

Taking down the existing ceiling fans 1200mm sweep from its position by duly disconnecting electric wire & refixing the same in original position & connecting the electric lines after painting of ceiling fan with synthetic enamel white paint by spraying including filling cavities with filler coat after cleaning all dust complete all as directed

Servicing of Geyser by preparing old painted surface and painting the geyser with one coat of white synthetic enamel spray paint including replacement of 15 Amps 3 pin plug connection complete all as directed Make of Plug:-Anchor/Standard//Havells

MCB DB SPN 4 way double door with Acrylic Window 240 volts with 200 Amps rated bus bar for housing MCBs compete all as directed.

S L R Construction

Janatha Trading Corporation