construction of Alpine hut on first floor of Administrative Bolck in fruit and vegeable market Batote under langushing JKIDFC

Amount

Demolshing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 mtrs leads. In cement mortoar.

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50m. ( stacks of cleaned bricks shall be measured):From brick work in cement mortar.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work up to plinth level in 1:4:8( 1 cement:4 Coarse sand :8 graded brick aggregate 40 mm nomnial size) . Crushed . (Including all carriages and leads).

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring , shuttering, finishing and reinforcement -All work above plinth up to floor V level. 1:1.5:3 ( 1 cement:1.5 coarse sand :3 graded stone aggregate 20 mm nominla size) Crushed. (Including all carriages and leads).

Centering and shuttering including strutting , propping etc and removal of form for:

Suspended floors , roofs, landings , balconies and access platform

Columns, pillars ,piers, Abutments , posts and struts.

Reinforcement for R.C.C work including straightening , cutting , bending , placing in position and binding all complete . Thermo-Mechanically Treated bars.

Brickwork withcommon burnt clay F.P.S.(non-modular) bricks of class designation 75 in super-strucure in cement mortar 1:6( 1cement : 6 coarse sand) (Including all carriages and leads).

Providing and fixing gang saw cut mirror polished ( pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick bases cement mortar 1:4 ( 1 cement : 4 coarse sand) with joints treated with shite ce,emt , mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at ad levels. Green marble 18 mm thick. (Including all carriages and leads).

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Marble work.

Providing wood work in frames of doors , windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or with dash fasteners shall be paid for separately) Second class Kail wood.

Structural steel work riveted or bolted in built up sections, trusses and framed work , including cutting hoisting , fixing in position and applying a priming coat of approved steel primer all complete.

Providing wood work in frames of doors , windows, clerestorry windows and other frames, wrought framed and fixed in position with hole fast lugs or with dash fasternes of requuired dia and length ( hole fast lugs or with dash fasternes shall be paid for separately. Sal wood .

Providing wood work in frames of false celling parttitions etc. sawn and fixed in position.Second class kail wood.

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clereastory windows including ISI marked M.S. pressed But hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of engineer-in-charge. Second class deodar woood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and cleresotry windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) . Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second class deodar wood.

Providing and fixing 35 mm thick glazed shutters for doors, windows and clerestory windows using 10 kg /sqm( 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood.

Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S wire gauze of average width for apeature 1.4 mm in both direction with wire of dia 0.63 mm for doors, windows with necessary screws ISI marked M.S pressed bright finished butt hinges with necessary screws required size second class dodar wood.

Providing and fixing 4mm thick glass panes with necessary wooden fillets . (glass panes weighing 10 kg/sqm)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing & fixing stainless steel (Grade-304) railing made of Hollow tubes channels plates etc. inluding welding, grinding, buffing, polishing & making curvature (where ever required) and fitting the same with necessary stainless steel nuts & bolts complete , i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stinless steel bolts etc. of required size on tie top of the floor or the side of waist slab with suitable arrangements as per approval of Engineer-in-charge, (for payment purpose only weight of stainless memebres shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.

Providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer) with water absorption less than 0.80% and conforming to IS: 15622 of approved make mortar 1:4 ( 1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigmnet etc. complete. Size of tile 60x60cm. (Including all carriages and leads).

Providing and fixing Ist quality ceramic glazed WALL TILES conforming to IS:13753 of minium thickness 5 mm of approved make like NITCO , ORIENT, SOMANY, KAJARIA in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3( 1 cement :3 coarse sand) and jointing with grey cement slurry 3.3 kg sqm including pointing in white cement mixed with pigment of matching shade complete. (Including all carriages and leads).

Providing and fixing cermic glazed floor tiles 300x300 mm thickness to be specified by the manfactures) of Ist quality conforming of IS 13555 OF NITCO,ORIENT , as white, lvory, Green, Fume Red Brown laid on 20 mm thick bed of cement Mortar 1:4(1 cement:4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete .(Including all carriages and leads).

Wooden planking ,tongued and grooved in flooring including fixing with iron screws complete: 15 mm thick Second class deodar wood.

Providing corrugated G.S sheet roofing including vertical/curved surface fixed wth polymer coated J or hooks, bolts and nuts 8mm diameter with bitumen and G.i limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( upto any pitch in horizontal/ vertical or curved surface) excluding the cost of purilins and trusses and including cutting to size and shape whereever required . 0.63mm thick with zinc coating not less than 275gm/m2.

Providing ridges or hips of width 60 cm overall width plain G.S sheets fixed with polymers coated J.or L hooks , bolts and nuts 8mm dia G.I limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2.

Providing valleys of 90cm wide overall in plains G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limped and bitumen washers complete. 1. 60 mm thick with zinc coating not less than 350gmm².

Providing and fixing on wall face unplasticised -Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

75 mm diameter

110 mm diameter

Providing and fixing on wall face unplasticised-PVC moulded fittings accessories for unplasticised- Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with sealinng conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

Single tee with door75x75x75mm

Single tee with doo 110x110x110mm

Bend 110 mm

Shoe ( plain)75 mm

Shoe (pain) 100 mm

providing and fixing unplasticised -PVC clips approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 cement: 4 coarse sand) and making good the wall etc. complete.

12 mm cement plaster of mix 1:6 ( 1 cement : 6 fine sand)(Including all carriages and leads).

15 mm cement plaster on rought side of single or half brick wall of mix 1:6 ( 1 cement : 6 fine sand) (Including all carriages and leads).

Providing and applying white cement based putty of average thickness 2 mm of approved brand and manufacture, over plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface. Water thinable cement primer.

Distempering with Ist quality acrylic washable distemper (ready made) of approved manufacturer and of required shade/ colour complete as per manufacturer's specifications. Two or more coats on new work.

Finshing walls with acrylic smooth exterior paint of required shade o n New work (two or more coats applied @ 1.67 litre/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm)

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work ( hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Wood work.

Provinding and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level. 1:3:6 (1 cement :3 coarse sand:6 graded stone aggregate 20 mm nomianl size)Crushed. (Including all carriages and leads).

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid, 10 litre low level white vitreous china flusing cistern and CP flush with fittings C.I. /M.S. brackets 40 mm bend diameter flush bend, overflow arrangement with specials of standard mskr snf modwuito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid with white vitreous china flushing cistern & C.P. flush bend.

Providing and fixing wash basin with C.I./M.S.brackets 15mm C.P. brass pillar taps, 32 mm C.P.brass washte of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

providing and fixing Salem Stainless Steel A ISI 304 ( 18/8) Kitchen sink as per I.S.13983 with C.I.brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required.Kitchen sink without drain board: 610x510mm bowl depth 200mm.

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete. 32 mm dia. Semi rigid pipe.

Providing and fixing 100 mm stainless steel gratings for gully , floor trap.

Providing and fixing 600x450 mm bevelled edge mirror of supperior glass ( of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PVC terminal guard.

providing and fixing PVC trap for self cleansing desing with screwed down or hinged grating.100mm inlet & 100mm outlet.

Providing and fixing 600x120x5mm glass shelf with edges rounded off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rail plugs , etc. complete.

Providing and fixing toilet paper holder C.P.brass.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm , weighing not less than 190 gms.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc: Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the walls.

15 mm dia, nominal bore

20 mm dia nominal bore

providing and fixing ball valve (brass) of approved quality complete. 20 mm nominal bore.

Providing and fixing uplasticised PVC connection pipe with brass unions. 45cm length 15 mm nominal bore.

Providing and fixing C.P.brass shower mixer & nose with 15 mm inlet.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931 15 mm nominal bore.

Providing and and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS: 8931.15 mm nominal bore.

Providing and fixing PTMT soap dish holder having length of 138 mm, breadth 102mm, heigth of 75 mm with conceated.

Providing and fixing Gyser of 35 lt. capacity alongwith fittings complete job. (HAVELS,VENUS,JAQUAR)

Providing and fixing Gyser of 10 lt. capacity alongwith fittings complete job. (HAVELS,VENUS,JAQUAR)

Providing and placing on terrace ( at all floor levels) polyethylene water storage tank ISI: 12701 marked including the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support to tank ( Sintex,Supreme, star, having valid ISI License)- Three layers. ( 2x500 ltr).

Providing and laying water proofing treatment to vertical and horizontal surface of depressed protions of W.C. kitchen and the like consisting of (i) ist course of applying cement slurry @ 4.4kg/sqm ,ixed with water proofing compound conforming to IS: 2645 in recommemeded proportions including rounding of junctions of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 ( 1 cement : 3 course sand) mixed with water proofing compound in recommended proportions including rounding of junctions of vertical and horizontal surface. (iii) 3rd course of applying blow or/ residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet . ( overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm. (Including all carriages and leads).

Providing and installation of water lift pump 1HP including all fittings complete job.

Wiring for light point /fan point/ exhaust fan point/ call bell point 1.5 sq.mm FIRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FIRLS PVC insulated copper conductor single core cable etc. as required. Group B.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light power plug with 4x4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 2x4 sq.mm+1X4sq.mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed mdium class PVc conduit as required.

2x1.5 sq.mm +1x1.5 sq. mm earth wire

2x2.5 sq.mm +1x2.5 sq.mm earth wire

Supplying and fixing following way, horizontal type three pole and neutral , sheet , MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar , interconnections, powder painted including earthing etc. as required ( But without MCB/RCCB/ISOlator) 8 way ( 4+ 24), Double door.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 KA, :C" curve, minlature circuit breaker suitable for inductive laod of following poles in the exisiting MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Single pole and neutral

Supply & fixing of ceiling fans ( BAJAJ, ORIENT, HAVELS etc) complete job.

M/s Tanveer Ahmed Contractor

M/s Mohd Firdoos Rather

Choor Singh

M/s Mohd Azam Wani and Sons

zakir hussain