Supplying and installation of heating system and repair to the existing electrical system in JKTDC Building G 1 near airport road

Amount

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. A ) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

b ) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 1.5 sq. mm

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. A ) 5/6 amps switch

b ) 15/16 A switch

c ) 3 pin 5/6 A socket outlet

d ) 6 pin 15/16 A socket outlet

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 6/6 amp

Supply and installation, testing and commissioning of GI Electric earthing with 50mm dia and 3 meter length with 3mm thick electrode should be hot dip galvanised. The GI Electrode shall be filled with cristal-e- conductive Material(CCM).

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.

Providing and fixing 25mm x 5mm G.I strip on surface or in recess for connections etc as required.

Supply and fixing MCCB in cubicle panel board. Providing and fixing following rating and breaking capacity MCCB - FP in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. ( Make as per annexure enclosed.) a ) MCCB FP 200 amp 36 KA

b ) MCCB FP 100 amp 36 KA

C ) MCCB FP 63 amp 16 KA

d) Change over switch ( on load ) MCCB type FP

Fabrication supplying installation testing and commissioning of following pannel made out of 2 mm thick M.S sheet , mounted, vermin dust proof indoor type with lockable type hingd doors duly painted with provision for fixing 1 Nos incomer MCCB, 2 Nos out going MCCB including supplying and fixing 20 sets of aluminum Base Bar and strips.ME Digital meter and other allied accessories as required.

Supply and fixing of following rating 240/415 volts "C" series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCBDB complete with connections, testing and commissioning (above to 32Amp) a) TPN 63amp

b) SPN 40 amp

Supply and fixing of 1.1Kv PVC insulated and PVC sheathed SLPE Power cable of following size on surface/surface cable tray, 0.50 mtr below ground level etc, as required including carriage upto site of work (Make as per annexure enclosed) a) 95 Sqm 3.5 core Armound

b) 35Sqm 3.5 core Armound

Supply and fixing Batten / angle holder with 9 watt LED lamp.

Supplying and installation of electirical pannel radiator of size 600x800, thermostate mechanical type, standard, 1400 watt 230 volts, 50 Hrtz including connection extra as required.

Soltec Heating Solutions