Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹17.2 L
EMD Value
₹35,000
Closing Date
25 May 2022, 5:00 pmClosed
SUPERINTENDNG ENGINEER
OFFICE OF THE SE OMC-IV BTPS PTPP PARICHHA
Routine and Preventive Breakdown Maintenance and upkeep of Switchyard
2022_RVUNL_694202_1
01/EMD-I/BTPS/PTPP/2022-23
Open Tender
Electrical Works
Lump-sum
365 days
PTPP Parichha Jhansi
As per tender
2 documents required · 2 mandatory
₹1,180
DY CAO PTPP PARICHHA
₹35,000
30 May 2022
29 Apr 2022
26 May 2022
29 Apr 2022
25 May 2022
29 Apr 2022
Amount
Routine Maintenance & upkeep of 220 KV Switchyard & associated Equipments of 2x210 MW PTPP Parichha Jhansi.
Assistance in overhauling of 220/132KV SF6 breakers (R, Y, B phases) in switchyard.
Complete overhauling of 220/132KV HCB three phase isolator with mechanical ganged with one earth switch normal type.
Complete overhauling of 220/132KV HCB three phase Tandem isolator with mechanical ganged with one earth switch normal type.
Complete overhauling of 220/132KV HCB three phase Tandem isolator with mechanical ganged without earth switch normal type.
Replacement of conductor in jumpers /bays in 220/132KV Switchyard. Opening of one clamp and tightening after work.
Replacement of damaged conductor with new conductor.
Replacement of one clamp of CT, CVT, breaker, LA, isolators.
Shifting of 220/132 KV CT / CVT / LA from central store to 220/132KV switchyard/Shifting of damaged equipment from 220/132KV switchyard to any assigned site inside plant.
Replacement of damaged one No.220/132KV CT / CVT / LA by new similar equipment in switchyard.
Cleaning of various equipment in 220/132KV switchyard. One pole of 220/132KV CT/CVT/Post insulator/LA.
One pole of 220/132KV SF6 circuit breaker.
Tightening of clamp & conductor connection at. One clamp of 220/132 KV C.T./C.V.T/LA/Isolator.
b. One clamp of 220/132 KV circuit Breakers.
Tightening of wave trap clamp, Bus dropper at Bus end, jumper etc related to Bus.
Filling of new, tested, centrifuged Transformer oil in following. One phase of 220KV CT.
One phase of 220KV CVT
Proper cleaning and painting of various electrical equipments in switchyard & Transformer yard as per scope of work mentioned at Sl. No.10 a to f.
Proper cleaning & painting inside and outside fencing of 220KV switchyard & Transformer yard
Painting letters and numbers over painted surface of various electrical equipments of the following sizes as per scope of work Sl.No.12 a to c. 60 mm x 10 mm x 800 Nos.
120 mm x 20 mm x 100 nos.
Complete overhauling work of one ELGI make reciprocating air compressor.
Replacement of one side Arm of anyone phase of 220/132KV, HCB Isolator
Overhauling of dewatering pumps installed in 220 KV switchyard
Greasing of compressor motor bearings & replacement of defective bearing if required
Horizontal & Vertical alignment of Isolator, as per scope of work at Sl. No. 17
Replacement / Servicing of 220 KV fingers, as per scope of work at Sl.No.18
Replacement / Servicing of 132 KV fingers, as per scope of work at Sl. No. 18
Replacement of wave trap clamp or BUS dropper clamp at BUS end or jumper etc. related to BUS, as per scope of work at Sl. No. 19
Shifting of damaged CT / PT / CVT / LA/ post insulator placed at ground level near their foundations to a specified place near compressor room or platform in S/Y or site store, as per scope of work at Sl.No.22
Cleaning of 220 KV bushings of Transformers, as per scope of work at Sl.No.23
Cleaning of 132 KV bushings of Transformers, as per scope of work at Sl.No.23
Attending oil leakage & filling of new tested, centrifuged transformer oil in One phase of 220/132 kV CT. as per scope of work at Sl.No.24
Attending oil leakage & filling of new tested, centrifuged transformer oil in One phase of 220/132 kV CVT. as per scope of work at Sl.No.24
Shifting of FILLED transformer oil drums of approx. 209 L capacity from central store to site store/ switchyard platform/ work place or vice versa, as per scope of work at Sl.No.25
Shifting of EMPTY transformer oil drums of approx. 209 L capacity from work place to site store/ switchyard platform or vice versa, as per scope of work at Sl. No. 25
Cleaning of 220/132 kV breakers & Isolators panel boxes, as per scope of work at Sl. No. 26
Cleaning of 220/132 kV switchyard & 132 kV Capacitor bank four times in a year.
Cleaning & tightening of insulator string of gantry tower.
Removal of canopy /Channels/Grills/ Mesh/Beam/Sheet of 6.6 KV, 340 KW Mill Motor.
Removal of canopy /Channels/Grills/ Mesh/Beam/Sheet of 6.6 KV, 350 KW TAC Motor
Removal of canopy /Channels/Grills/ Mesh/Beam/Sheet of 6.6 KV, 600 KW CEP Motor
Removal of canopy /Channels/Grills/ Mesh/Beam/Sheet of 6.6 KV, 660 KW FD Fan Motor
Removal of canopy /Channels/Grills/ Mesh/Beam/Sheet of 6.6 KV, 1300 KW PA Fan Motor
Removal of canopy /Channels/Grills/ Mesh/Beam/Sheet of 6.6 KV, 1550 KW ID Fan Motor
Shifting of motor from one foundation to the other foundation within same unit of 6.6 KV, 340 KW Mill Motor.
Shifting of motor from one foundation to the other foundation within same unit of 6.6 KV, 350 KW TAC Motor
Shifting of motor from one foundation to the other foundation within same unit of 6.6 KV, 375 KW ACW Motor
Shifting of motor from one foundation to the other foundation within same unit of 6.6 KV, 600 KW CEP Motor
Shifting of motor from one foundation to the other foundation within same unit of 6.6 KV, 660 KW FD Fan Motor
Shifting of motor from one foundation to the other foundation within same unit of 6.6 KV, 1300 KW PA Fan Motor
Shifting of motor from one foundation to the other foundation within same unit of 6.6 KV, 1550 KW ID Fan Motor
Shifting of motor from one foundation to the other foundation within same unit of 6.6 KV, 1600 KW C.W. Motor
Shifting of motor from one foundation to the other foundation within same unit of 6.6 KV, 3600 KW BFP Motor
Shifting of motors from one foundation Unit # 3 to the other foundation of Unit # 4 or vice versa of 6.6 KV, 340 KW Mill Motor.
Shifting of motors from one foundation Unit # 3 to the other foundation of Unit # 4 or vice versa of 6.6 KV, 350 KW TAC Motor
Shifting of motors from one foundation Unit # 3 to the other foundation of Unit # 4 or vice versa of 6.6 KV, 375 KW ACW Motor
Shifting of motors from one foundation Unit # 3 to the other foundation of Unit # 4 or vice versa of 6.6 KV, 600 KW CEP Motor
Shifting of motors from one foundation Unit # 3 to the other foundation of Unit # 4 or vice versa of 6.6 KV, 660 KW FD Fan Motor
Shifting of motors from one foundation Unit # 3 to the other foundation of Unit # 4 or vice versa of 6.6 KV, 1300 KW PA Fan Motor
Shifting of motors from one foundation Unit # 3 to the other foundation of Unit # 4 or vice versa of 6.6 KV, 1550 KW ID Fan Motor
Shifting of motors from one foundation Unit # 3 to the other foundation of Unit # 4 or vice versa of 6.6 KV, 1600 KW C.W. Motor
Shifting of motors from one foundation Unit # 3 to the other foundation of Unit # 4 or vice versa of 6.6 KV, 3600 KW BFP Motor
Shifting of motors from its foundation to ground or vice versa of 6.6 KV, 340 KW Mill Motor.
Shifting of motors from its foundation to ground or vice versa of 6.6 KV, 350 KW TAC Motor
Shifting of motors from its foundation to ground or vice versa of 6.6 KV, 375 KW ACW Motor
Shifting of motors from its foundation to ground or vice versa of 6.6 KV, 660 KW FD Fan Motor
Shifting of motors from its foundation to ground or vice versa of 6.6 KV, 1300 KW PA Fan Motor
Shifting of motors from its foundation to ground or vice versa of 6.6 KV, 1550 KW ID Fan Motor
Shifting of motors from its foundation to ground or vice versa of 6.6 KV, 1600 KW C.W. Motor
Shifting of motors from its foundation to TG Hall or vice versa of 6.6 KV, 340 KW Mill Motor.
Shifting of motors from its foundation to TG Hall or vice versa of 6.6 KV, 350 KW TAC Motor
Shifting of motors from its foundation to TG Hall or vice versa of 6.6 KV, 600 KW CEP Motor
Shifting of motors from its foundation to TG Hall or vice versa of 6.6 KV, 660 KW FD Fan Motor
Shifting of motors from its foundation to TG Hall or vice versa of 6.6 KV, 1300 KW PA Fan Motor
Shifting of motors from its foundation to TG Hall or vice versa of 6.6 KV, 1550 KW ID Fan Motor
Shifting of motors from its foundation to TG Hall or vice versa of 6.6 KV, 3600 KW BFP Motor
Shifting of motors from central store to TG Hall/Site or vice versa of 6.6 KV, 340 KW Mill Motor.
Shifting of motors from central store to TG Hall/Site or vice versa of 6.6 KV, 350 KW TAC Motor
Shifting of motors from central store to TG Hall/Site or vice versa of 6.6 KV, 375 KW ACW Motor
Shifting of motors from central store to TG Hall/Site or vice versa of 6.6 KV, 600 KW CEP Motor
Shifting of motors from central store to TG Hall/Site or vice versa of 6.6 KV, 660 KW FD Fan Motor
Shifting of motors from central store to TG Hall/Site or vice versa of 6.6 KV, 1300 KW PA Fan Motor
Shifting of motors from central store to TG Hall/Site or vice versa of 6.6 KV, 1550 KW ID Fan Motor
Shifting of motors from central store to TG Hall/Site or vice versa of 6.6 KV, 1600 KW C.W. Motor
Shifting of motors from central store to TG Hall/Site or vice versa of 6.6 KV, 3600 KW BFP Motor
Rotating of motor on its foundation by 90 Degree or restoring motor on its foundation of 6.6 KV, 340 KW Mill Motor.
Rotating of motor on its foundation by 90 Degree or restoring motor on its foundation of 6.6 KV, 350 KW TAC Motor
Rotating of motor on its foundation by 90 Degree or restoring motor on its foundation of 6.6 KV, 660 KW FD Fan Motor
Rotating of motor on its foundation by 90 Degree or restoring motor on its foundation of 6.6 KV, 1300 KW PA Fan Motor
Rotating of motor on its foundation by 90 Degree or restoring motor on its foundation of 6.6 KV, 1550 KW ID Fan Motor
Rotating of motor on its foundation by 90 Degree or restoring motor on its foundation of 6.6 KV, 3600 KW BFP Motor
Installation of canopy /Channels/Grills/ Mesh/Beam/Sheet of 6.6 KV, 340 KW Mill Fan Motor
Installation of canopy /Channels/Grills/ Mesh/Beam/Sheet of 6.6 KV, 350 KW TAC Motor
Installation of canopy /Channels/Grills/ Mesh/Beam/Sheet of 6.6 KV, 600 KW CEP Motor
Installation of canopy /Channels/Grills/ Mesh/Beam/Sheet of 6.6 KV, 660 KW FD Motor.
Installation of canopy /Channels/Grills/ Mesh/Beam/Sheet of 6.6 KV, 1300 KW PA Fan Motor
Installation of canopy /Channels/Grills/ Mesh/Beam/Sheet of 6.6 KV, 1300 KW ID Fan Motor
Providing suitable Hydra crane for loading and unloading of 6.6 KV motor at site within 08 hrs, if hydra crane is not provided by the department.
Removal of coupling from rotor shaft of motor of 6.6 KV, 340 KW Mill Motor.
Removal of coupling from rotor shaft of motor of 6.6 KV, 350 KW TAC Motor.
Removal of coupling from rotor shaft of motor of 6.6 KV, 375 KW ACW Motor
Removal of coupling from rotor shaft of motor of 6.6 KV, 600 KW CEP Motor
Removal of coupling from rotor shaft of motor of 6.6 KV, 660 KW FD Fan Motor
Removal of coupling from rotor shaft of motor of 6.6 KV, 1300 KW PA Fan Motor
Removal of coupling from rotor shaft of motor of 6.6 KV, 1550 KW ID Fan Motor
Removal of coupling from rotor shaft of motor of 6.6 KV, 1600 KW C.W. Motor
Removal of coupling from rotor shaft of motor of 6.6 KV, 3600 KW BFP Motor
Dismantling of motor as per scope of work of 6.6 KV, 340 KW Mill Motor.
Dismantling of motor as per scope of work of 6.6 KV, 350 KW TAC Motor
Dismantling of motor as per scope of work of motor of 6.6 KV, 375 KW ACW Motor
Dismantling of motor as per scope of work of 6.6 KV, 600 KW CEP Motor
Dismantling of motor as per scope of work of 6.6 KV, 660 KW FD Fan Motor
Dismantling of motor as per scope of work of 6.6 KV, 1300 KW PA Fan Motor
Dismantling of motor as per scope of work of 6.6 KV, 1550 KW ID Fan Motor
Dismantling of motor as per scope of work of 6.6 KV, 1600 KW C.W. Motor
Dismantling of motor as per scope of work of 6.6 KV, 3600 KW BFP Motor
Removal of DE/NDE side bearing of 6.6 KV, 340 KW Mill Motor.
Removal of DE/NDE side bearing of 6.6 KV, 350 KW TAC Motor
Removal of DE/NDE side bearing of 6.6 KV, 375 KW ACW Motor
Removal of DE/NDE side bearing of 6.6 KV, 600 KW CEP Motor
Removal of DE/NDE side bearing of 6.6 KV, 660 KW FD Fan Motor
Removal of DE/NDE side bearing of 6.6 KV, 1300 KW PA Fan Motor
Removal of DE/NDE side bearing of 6.6 KV, 1550 KW ID Fan Motor
Removal of DE/NDE side bearing of 6.6 KV, 1600 KW C.W. Motor
Removal of DE/NDE side bearing of 6.6 KV, 3600 KW BFP Motor
Installation of DE/NDE side bearing of 6.6 KV, 340 KW Mill Motor.
Installation of DE/NDE side bearing of 6.6 KV, 350 KW TAC Motor
Installation of DE/NDE side bearing of 6.6 KV, 375 KW ACW Motor
Installation of DE/NDE side bearing of 6.6 KV, 600 KW CEP Motor
Installation of DE/NDE side bearing of 6.6 KV, 660 KW FD Fan Motor
Installation of DE/NDE side bearing of 6.6 KV, 1300 KW PA Fan Motor
Installation of DE/NDE side bearing of 6.6 KV, 1550 KW ID Fan Motor
Installation of DE/NDE side bearing of 6.6 KV, 1600 KW C.W. Motor
Installation of DE/NDE side bearing of 6.6 KV, 3600 KW BFP Motor
Assembling of Motor as per scope of work of 6.6 KV, 340 KW Mill Motor.
Assembling of Motor as per scope of work of 6.6 KV, 350 KW TAC Motor
Assembling of Motor as per scope of work of 6.6 KV, 375 KW ACW Motor
Assembling of Motor as per scope of work of 6.6 KV, 600 KW CEP Motor
Assembling of Motor as per scope of work of 6.6 KV, 660 KW FD Fan Motor
Assembling of Motor as per scope of work of 6.6 KV, 1300 KW PA Fan Motor
Assembling of Motor as per scope of work of 6.6 KV, 1550 KW ID Fan Motor
Assembling of Motor as per scope of work of 6.6 KV, 1600 KW C.W. Motor
Assembling of Motor as per scope of work of 6.6 KV, 3600 KW BFP Motor
Installation of coupling on the shaft rotor of 6.6 KV, 340 KW Mill Motor.
Installation of coupling on the shaft rotor of 6.6 KV, 350 KW TAC Motor
Installation of coupling on the shaft rotor of 6.6 KV, 375 KW ACW Motor
Installation of coupling on the shaft rotor of 6.6 KV, 600 KW CEP Motor
Installation of coupling on the shaft rotor of 6.6 KV, 660 KW FD Fan Motor
Installation of coupling on the shaft rotor of 6.6 KV, 1300 KW PA Fan Motor
Installation of coupling on the shaft rotor of 6.6 KV, 1550 KW ID Fan Motor
Installation of coupling on the shaft rotor of 6.6 KV, 1600 KW C.W. Motor
Installation of coupling on the shaft rotor of 6.6 KV, 3600 KW BFP Motor
Fabrication and supply of grease plate, grease flinger, spring & Circlip etc as per sample of 6.6 KV, 340 KW Mill Motor.
Fabrication and supply of grease plate, grease flinger, spring & Circlip etc as per sample of 6.6 KV, 350 KW TAC Motor
Fabrication and supply of grease plate, grease flinger, spring & Circlip etc as per sample of 6.6 KV, 375 KW ACW Motor
Fabrication and supply of grease plate, grease flinger, spring & Circlip etc as per sample of 6.6 KV, 600 KW CEP Motor
Fabrication and supply of grease plate, grease flinger, spring & Circlip etc as per sample of 6.6 KV, 660 KW FD Fan Motor
Fabrication and supply of grease plate, grease flinger, spring & Circlip etc as per sample of 6.6 KV, 1300 KW PA Fan Motor
Fabrication and supply of grease plate, grease flinger, spring & Circlip etc as per sample of 6.6 KV, 1550 KW ID Fan Motor
Fabrication and supply of grease plate, grease flinger, spring & Circlip etc as per sample of 6.6 KV, 1600 KW C.W. Motor
Repairing of bearing housing of DE/NDE side bearings of of 6.6 KV, 340 KW Mill Motor.
Repairing of bearing housing of DE/NDE side bearings of 6.6 KV, 375 KW ACW Motor
Repairing of bearing housing of DE/NDE side bearings of 6.6 KV, 600 KW CEP Motor
Repairing of bearing housing of DE/NDE side bearings of 6.6 KV, 660 KW FD Fan Motor
Repairing of bearing housing of DE/NDE side bearings of 6.6 KV, 1300 KW PA Fan Motor
Repairing of bearing housing of DE/NDE side bearings of 6.6 KV, 1550 KW ID Fan Motor
Repairing of bearing housing of DE/NDE side bearings of 6.6 KV, 1600 KW C.W. Motor
Repairing of bearing housing of DE/NDE side bearings of 6.6 KV, 3600 KW BFP Motor
Replacement of oil gaskets of DE/NDE side bearings of 6.6 KV, 3600 KW BFP Motor
Laying of power cable of 1C X 500 mm2 size
Laying of power cable of 3C X 240 mm2 size
Laying of power cable of 3C X 185 mm2 size
Laying of power cable of 3C X 150 mm2 size
Laying of power cable of 3C X 70 mm2 size
Laying of LT cable of size 400/120 mm2
Laying of all type of control cables etc.
End termination cable of 1C X 500 mm2
End termination cable of 1C X 400 mm2
End termination cable of 3C X 240 mm2
End termination cable of 3C X 185 mm2
End termination cable of 3C X 150 mm2
End termination cable of 3C X 70 mm2
Straight through jointing of 1C X 500 mm2 cable
Straight through jointing of LT cable per set of 1CX800, 3CX240 ,3CX300,1CX630 ,3CX150 ,3CX185
Straight through jointing of LT cable per set of &1CX400 ,3CX120 ,1CX300,1CX240 ,2CX120 ,3CX95,3CX75 ,1CX185
Straight through jointing of 3C X 70 mm2 cable
Lugging of 1C X 500 mm2 cable
Lugging of 1C X 400 mm2 cable
Lugging of 3C X 240 mm2 cable
Lugging of 3C X 185 mm2 cable
Lugging of 3C X 150 mm2 cable
Lugging of 3C X 70 mm2 cable
Fabrication and fixing of cable racks & other M.S. structures.
Shifting & laying of cable tray of size up to 300 mm width (ladder Type, perforated type GI cable trays etc)along with Accessories
Shifting & laying of cable tray of size above 300 mm width (ladder Type, perforated type GI cable trays etc)along with Accessories
Removal of loose Scrap
Centrifuging of Transformer oil using filtration plant provided by the Deptt. 1 Job is equal to 1 shift of 8 hours
M.A.K. CONSTRUCTION CO.
VISION ENGINEERING COMPANY
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .